Search results

  1. B

    Best head for bottom end

    a larger cam has the same effect as a larger head, so use the edle heads and leave the stock cam in
  2. B

    stock air box, stay or go???

    I have a hci 5.0 in a 89 GT aod with 410,s and i still have the stock air box with 65 t-body, how much can i gain with an anderson power pipe???, it already HAS edle heads cobra intake 65t-b and headers, 410s thanks:SNSign:
  3. B

    Time for brakes... a little help please

    on the back breaks [onley] when you push your pistons back in the caliper , i always need to take chanell locks and rotate the pistons to get them back in along with pushing with the c-clamp , it is esay to get the chanell locks on the rubber boot for the piston and tear it, [heads-up], the...
  4. B

    stroker kit??

    how far can you go on the bore???? 30 -60- 80??? probably only 30 not enough to help much
  5. B

    stroker kit??

    no stroker kits for the 4.6?????
  6. B

    A little secret....how I cleaned my headlights

    thanks roland ill give the it a try!!!!!!
  7. B

    where to buy a code puller???

    where can i buy a code puller, I dont want the autozone code puller, I want it to read out the code number thanks!!!
  8. B

    stroker kit??

    anyone make a stroker kit for a 04 mach??
  9. B

    deck surface cleaning

    do you have an air compressor??
  10. B

    New wheel bearings when doing front rotors?

    I have always just repacked that style with grease evey time i did a brake job and never any trouble ,one car i had 300 thousand miles on the front wheel bearings that way, the new style that you cant pack with grease ,i have had to replace
  11. B

    Ignition Switch problem

    I have seen this along time ago, i [think ?] its the solnoid
  12. B

    Squeaks & Rattles

    put your finger on the balljoint and have someone bounce the front end, if its bad you will feel a viberation
  13. B

    front end sqeuaking noise... just a quick question.

    for me it was always a ball joint, put your finger on it and bounce the front end, for tierod end put your finger on it and have someone turn the wheel, if its bad you will feel a viberation
  14. B

    new radiator on budget?

    advance auto worked for me
  15. B

    Founding Member?

    :hail2: founding members
  16. B

    where to buy 0 2 sensor??

    does the Bosh 02,s work out as good as Ford ??? whats the cost??
  17. B

    where to buy 0 2 sensor??

    where is the best place to get 02 sensor,s thanks
  18. B

    pinging should i run spout out??

    the car still has the stock H pipe on it, only mod is cat back flows motor untouched
  19. B

    pinging should i run spout out??

    it does-not ping now but if i advance it to 11 it will at PART throttle, the mass air is clean but i have not cleaned the iac but it idles fine the pinning happens more from a load on the motor and timming at 11 or more
  20. B

    pinging should i run spout out??

    the harmonic ballancer is fine i took it off and compared it to a new one
Top Bottom
Back
Forums
Menu