Search results

  1. I

    Engine Metal Bar Back of Lower Intake?

    Ok cool, would you know what the two odd bolts with the studs are for? One with a nut over the stud? I'm thinking that nut is for the coolant tube, but not positive. Don't know what the driver's side would go to
  2. I

    Engine Metal Bar Back of Lower Intake?

    So I'm putting things back together after replacing my lower intake gaskets. I put the fuel rail on last night and in my bag of parts there's a metal bar. I remember it being on the back of the intake... somewhere... but now I can't remember or see where it's supposed to go. I'm thinking it...
  3. I

    Engine Intake Gasket Question

    Well at first I thought maybe EGR valve... but it doesn't look right for that :/
  4. I

    Engine Intake Gasket Question

    Thanks man!
  5. I

    Engine Intake Gasket Question

    Wondering what these two things are. One looks like an EGR gasket, but the EGR is on the rear of the engine correct? If so why would that be included in this set? Do I need to do this gasket or can I leave it alone? The other is an O-Ring, but not sure what this goes to. Distributor? Thanks...
  6. I

    Engine RTV Around Rear Rail PCV

    Hey guys, I just finished putting on my lower intake. Torqued all the bolts down in sequence etc. I've now realized that I put RTV around the rear PCV "Hole" so instead of just putting in along the rear rail only, that little loop on the rear.. Do I now need to pull the intake and remove that...
  7. I

    Engine Intake Surface Imperfection Cylinder Head

    Never mind... I got it off... must have been part of the gasket
  8. I

    Starter Install

    Just want to say thanks for this thread... I tried for a few hours to get the starter off and couldn't do it. Found this, took my wheel off... looked through the hole and THERE was the bolt! Got it off in about 10 minutes.
  9. I

    Anti Moan Brackets Too Long

    Finally got it... had to use two washers to shim it and then a little persuasion on the bracket to bend it up a little and it's finally working... with no moaning so, glad that's over :) Thanks for the replies guys.
  10. I

    Anti Moan Brackets Too Long

    I grinded down the brackets and got them to fit. My issue now is the passenger caliper is rubbing, and I don't know how they got it to center onto the rotor. I've tried using washers on the inside, but haven't had any luck yet.
  11. I

    Anti Moan Brackets Too Long

    So I had the LMR disc brakes put on the car https://lmr.com/item/LRS-232093-K/1993-mustang-complete-4-lug-disc-brake-conversion?gclid=EAIaIQobChMIu4Xk_dCq1gIVBweGCh08dguVEAQYBSABEgJ-zvD_BwE But they moan like crazy. So I bought some anti-moan brackets...
  12. I

    Lmr Rear Disc 4-lug For Fox

    Awesome man... bought :)
  13. I

    Lmr Rear Disc 4-lug For Fox

    It didn't come with those :/ I found an article mentioning them but I guess they need to be cut and welded? http://www.mustangandfords.com/how-to/wheels-tires/24698-rear-disc-brakes-anti-moan-brackets/
  14. I

    Lmr Rear Disc 4-lug For Fox

    Hey guys, So I had them gut the stock proportioning valve and add the adjustable. Then they did a bench bleed of the MC and the brakes work perfectly now :) Well worth the money IMO. The only issue I'm having now is once the car/brakes get warm I'm getting a moan when I take off from a stop...
  15. I

    Lmr Rear Disc 4-lug For Fox

    Yeah I'm taking it back and having them bleed it again. Hopefully I'll get this sorted out.
  16. I

    Lmr Rear Disc 4-lug For Fox

    I don't know if the MC was bench bled. It's the 93 cobra MC that comes with the kit so it "should" be right right? I checked the calipers and the hoses are on top on both sides so looks like they're on the correct sides.
  17. I

    Lmr Rear Disc 4-lug For Fox

    Thanks for the replies guys. So one of my dust shields rubs and the other one doesn't. I didn't do the install, my shop did it, but they didn't install the proportioning valve... said it wasn't necessary. But now I have a very soft pedal... almost like the brakes need to be bled. Did you...
  18. I

    Lmr Rear Disc 4-lug For Fox

    I have it already and was about to install so was just wondering if anyone else had done it.
  19. I

    Lmr Rear Disc 4-lug For Fox

    Anyone got this kit? https://lmr.com/item/LRS-23208792-K/1987-1992-mustang-4-lug-rear-disc-conversion-stock-axles?year=1987&gclid=EAIaIQobChMIj6fGvpuE1gIVhFd-Ch0WTQ9CEAQYASABEgJBZvD_BwE Tired of having issues with my rear drums and wanted to convert to disc. Just wondering if anyone had...
  20. I

    This Clutch Cable With Stock Quadrant?

    Ok awesome thank you
Top Bottom
Back
Forums
Menu