Search results

  1. O

    Do you think a 3G alternator will fit in this 5.0?

    6g? I don't know what that is. Is it easy to wire like the 3G?
  2. O

    Do you think a 3G alternator will fit in this 5.0?

    Hi, I'm working on a project and I had to drop the idler tension er down a little to get some things to fit and that made it closer to the alternator. Now I'm wondering if a 3g is going to fit. I would like to go with the SN-95 style alt in case I have problems on the road parts will be easy to...
  3. O

    Wrecked 93 Cobra Insurance screwed me

    When the noise of my fox got smashed I was offered a low amount and they wanted to keep the car I asked the adjuster to leave before he had to limp out and told him I will see you in Court. He said something about the book value I told him I didn't drive a book to the shows or cruise ins...
  4. O

    I need a wiring diagram for a aftermarket relay

    OK, I used RangerJoes diagram to figure out how the relay works. I hooked up a relay on the workbench and I was using a test light just sort of playing with it and I couldn't figure out how to get the fans to kick on if I only used one standard relay. Mustang5L5, I forgot to mention that I'm...
  5. O

    I need a wiring diagram for a aftermarket relay

    Hi, I'm going to be wiring up a relay for an electric fan and using a aftermarket relay. I didn't get a wiring diagram with it. On the bottom of the the relay the terminals are marked 85 86 87 87-a 30 Please keep in mind that I have air and want the fans to kick on with the a/c...
  6. O

    part number for heater hoses and by pass

    I'm trying to get new heater hoses and a by pass hose from the zone and I'm having a heck of a time. I had to order the hoses and when they came in they weren't even close. The guy behind the counter came out and looked at the hoses on the car and said "wow these aren't even close" Anyone know...
  7. O

    I need a set of fans and shrouds electric

    I'm setting up a supercharger and it's looking like the belts are going to be real close the the radiator.The belt that sit out the farthest is about 3" wide. And that kills a lot of space.I saw some slim fans with shrouds and 2 -10" fans but the CFM was not listed. What are you guys running...
  8. O

    ball joint question

    Depends,, If the ball joint came out of the control arm then the control arm is toast. If the bottom of the ball joint is still in the control arm and just the ball joint came apart then it may be OK and you can replace just the ball joint.
  9. O

    where to install temp sensor for electric fans

    you may have a 1/2 pipe thread if the holes look to small Auto meter makes an adapter part 2263 and this will also take up some of the long censor. you can check it out at summit racing's web sight Then it will fit in the thermostat housing from auto zone
  10. O

    Fox rear disc

    Don't use the fox master cylinder with rear disc brakes. I did that and it felt fine. Then I got bit in the butt ,, The rear pads are gone and the fronts look good. There's a check ball in there somewhere and it don't like disc brakes. Trust me on this one.
  11. O

    clutches in a ford 8.8 question

    Hi, Hey I'm going to replace the clutches in my 8.8 posi and I have a few questions. The last 8.8 I set up I had a heck of a time getting the "s" spring back in someone said that you can use a hose clamp on the spring and slip it right in. ever hear of this? How did it work? Or know...
  12. O

    17x8 bullitts on Fox

    Ok,,,,,,,,If he has 245-45-17 he should be ok If you are running the 255-55-17 then it will rub in the front when you cut the wheels all the way. or at least that's the way mine works out and it is a 91 fox with SN-95 conversion front and rear.
  13. O

    Items needed to make 97gt rearend fit in 92 fox

    mustang 5L5,, What was the name of the place you gave me to pick up the brake lines to put the 95 master cylinder on my fox? motor-sport or something That place has the kit he needs. Oh,, And thanks that place was great
  14. O

    transmission oil

    your mechanic must be an old school guy. You got to remember back in the day, Parts moved slower and fit looser and heat was a problem. A thicker oil was usually best in everything if you were going to race. That's why most of the old school guys are always wanting to thicken up the...
  15. O

    94-95 5.0 in a fox what needs changed to fit?

    I have a supercharger intake that I will be running with a Mallory distributor so I think I have the top of the engine covered. And I have a set of valve covers. I am just sort of wondering what I will need to do to the front and the oil pan. If I pick this 94 engine up I would like to set...
  16. O

    17x8 bullitts on Fox

    I have the 17x8 bullitts on my 91 fox and they rubbed in the rear on the inside untill I installed the SN-95 axles and brakes there 3/4 longer. now it's just right. The fronts are also 17x8 bullits and they rub when the wheels are cut all the way (the last 1/8 turn)-my tires are to big...
  17. O

    5.0 replacement

    That set up should work nice with the 3:55 gears.
  18. O

    94-95 5.0 in a fox what needs changed to fit?

    Hi, I'm looking at motors for my fox and In ran across a motor out of a 95. I am planing on using all the brackets and accessories off the 91 fox engine on the 95 engine. but there some things that I would like to know 1- will I need to change the timing cover? 2- will the oil pans be the...
  19. O

    Bullitt pedals for $35? Why not?

    Damn that looks good
  20. O

    Edelbrock Performer heads and FMS 1.6 rockers

    Are these still for sale?
Top Bottom
Back
Forums
Menu