Search results

  1. C

    4 BLOWN T-5's

    maybe ill just bring them to the junkyard for their aluminum value.
  2. C

    4 BLOWN T-5's

    The guy posted prices of what he was willing to pay so I figured id get rid of them. Im tryin to scrap up some money for a notch and im looking everywhere.
  3. C

    4 BLOWN T-5's

    I saw a post about this a long time ago and now cant find the person. They were looking for blown t-5s and would pay some money for them because they were rebuilding them and selling them. Anyone know where I could find out about this as crazy as it sounds? I have 4 of them sitting in my basement.
  4. C

    TONS OF CODES

    Any other ideas.
  5. C

    TONS OF CODES

    As for the injectors and maf that is what ed curtis reccomended so I went with it since im used to speed density cars. The resistance between pin D and pin 50 and pin C and pin 9 was less than 2 ohms. I believe it was like 3/10 of an ohm. As for pin C or D and the ground I couldnt get any...
  6. C

    TONS OF CODES

    Do you think that becasue I have a pro-m 80mm maf for #30 injectors and an AFM powerpipe which puts it in the fenderwell it might cause this problem? Being that cool air allows for more voltage.
  7. C

    TONS OF CODES

    Ok thanks. Im gonna run outside and try and work on #66 first.
  8. C

    TONS OF CODES

    I pulled the KOEO codes on my car and this is what I got: 67, 81, 82, 85, 84, 29, 33, 66 I have all the emissions stuff taken out of the car and I have a non emissions camshaft so that will probably explain some of the codes. I just cleaned the maf with contact cleaner and have a new air...
  9. C

    KOEO code 66

    I pulled the KOEO codes and I have a code 66. I cleaned the maf element and have a new filter. At idle my volt meter reads in the 1.2 range and fluctuates. It reads that the voltage is low but I thought that it had to be 1.0 at idle? Any ideas?
  10. C

    4cyl or 8cyl pilot bearing

    It will work but I have been told it could do alot of damage. It will work because the 8 cylinder bearing is larger than the 4 cylinder shaft so it will go in no problem. What you should do and it is also what I have done in the past is change the pilot bearing to match the trans you have. 4 cyl...
  11. C

    QUESTION ABOUT 4 Cylinder SPRINGS

    Im not worried about how it will look with the springs its the weight transfer that im concerned about. If it sits higher with the v8 springs wouldnt that be better? That way the weight is partially transferred already.
  12. C

    QUESTION ABOUT 4 Cylinder SPRINGS

    I have a set of 4 cylinder springs that I want to put in. A lot of people reccomend them for better weight transfer but they say that it makes the front of the car sit a little bit lower. After a lot of weight reduction my car sits pretty high in the front with the stock v8 springs. Wont putting...
  13. C

    The Mickey Tompson ET street radials WOW

    Also do any of you guys launch on the street with these? Thats where ill be using them 99% of the time.
  14. C

    The Mickey Tompson ET street radials WOW

    Where do you guys order these tires from and how much are they costing? I looked on ebay but it seems they will end up costing more than they should after shipping and everything.
  15. C

    80mm MAF and STOCK AIR BOX

    White99gt where did you get that elbow from? Also its not a problem that your going from stock 3.5 inch to a 4inch pipe? Isnt that kind of a bottle neck?
  16. C

    The Mickey Tompson ET street radials WOW

    Foxfan88 that is on the slick or radial version?
  17. C

    The Mickey Tompson ET street radials WOW

    Everyone here is running the drag radial version of the et streets here? 5000 rpm launches and dead hooks on drag radials seems pretty odd or are these tires just that good?
  18. C

    M/T ET STREETS??????

    Im a little confused here. I want to get a pair of real good tires so I was looking at m/t et streets. On here i hear everyone asking each other if there true et streets or drag radials. Which ones are better? I am going to be using them at the track and for street racing as well. I just want...
  19. C

    80mm MAF and STOCK AIR BOX

    Hi, I have a pro-m 80mm maf and it has the air filter attached to the unit. My question is do they make one that I can make work with the stock air box? Or will I have to go down to a 75mm maf.
  20. C

    ELECTRIC FAN ON TOGGLE SWITCH

    No I did not do the 3g upgrade. Im hoping I can get away with not doing it if possible since I have no radio and no heater or a/c.
Top Bottom
Back
Forums
Menu