Search results

  1. 3

    halo headlight replacement

    They claim that these zeon headlights are supposed to last the life of the car.
  2. 3

    halo headlight replacement

    Ok, on a closer inspection, I noticed it's NOT the actual "halo" that's out, it the light that's inside the circle(halo). Is that a bulb that can be replaced or am I still screwed into buying an entire assembly? I just can see ANY company designing these headlights that force people to...
  3. 3

    halo headlight replacement

    Why would they make something that you would have to replace the entire assembly once a light went out? That does not make sense. Are "halos" and "angel eye" lights the same thing?
  4. 3

    halo headlight replacement

    Just bought a 2000 mustang that already had aftermarket halo headlights installed but just noticed one side is out already. I never had these type of headlights before so I need to know what is involved in changing them or what type of bulb I need.
  5. 3

    Dead spot in steering wheel...

    just bought a 2000 mustang V-6 auto. I noticed tonight that the steering as a small "dead spot" in it. It has a small amount of play in the steering wheel as you drive down the road. It's not a lot but it's noticable. What would cause that? It has 18inch wheels and tires but I don't think...
  6. 3

    Looking at a 2000 mustang tomorrow(need opinions)

    I take it these are common problems with this year mustang?
  7. 3

    Looking at a 2000 mustang tomorrow(need opinions)

    Going to look at a 2000 mustang V-6, automatic tomorrow. It has a Mac cat-back exhaust and a Winstar intake. I have a few questions that I hope somebody can answer. First, how reliable are the Ford V-6 engines and 4 speed autos? It has 117k miles. Second, is the Winstar intake upgrade...
  8. 3

    Summit brand piston rings top gap totally off coming in at .028!!!

    I would have got another set of speed pro rings. Summit brand is junk in my opinion but I'm sure there are people that swear by that brand. Summit brand is like the generic version of the real thing but that's just my opnion...
  9. 3

    89 gt fog light bulb

    How did you get the lens cover off? I tried and tried and finally said screw this and bought a new assembly.
  10. 3

    89 gt fog light bulb

    I just did some research on this and found out that you [B]CAN] replace just the bulb...but....getting the lens to come off is another thing without breaking the cheesy lens clip that holds it on. Installing a new foglight assembly will be MUCH easier than screwing around trying to get the lens...
  11. 3

    89 gt fog light bulb

    Well I have an '88GT and I'm almost positive, you can't just replace the fog light bulb. I had one go out and thought I could just replace the bulb also but I think it's a sealed lens. I bought a new fog light assembly for the left side for $25. If anyone can post pics to show how to replace...
  12. 3

    '82 to '89 Dash Swap, need experience

    Did you put a different front end on that '82? The grill looks like it's from an 83 or '84. Mine has 3 horizontal "bars" going across for the grill....it's not mesh like the one shown here. Just curious but I like that swap you just did. You should write up a tech article on how it's done...
  13. 3

    brake line rusted fast to brake cylinder!

    ...and if that fails I'm pretty much forced to cut the line and replace it? The nut is starting to get chewed up pretty good already..lol
  14. 3

    brake line rusted fast to brake cylinder!

    We heated the nut with a small propane torch. We tried everything from heat to PB blaster.
  15. 3

    foxbody 4 lug pony rims

    What part of Pa.? I'm on the Eastern side about an hour North of Harrisburg.
  16. 3

    brake line rusted fast to brake cylinder!

    My buddy and I went to replace both my rear brake cylinder on my '88GT but could not get the brake line off because it was rusted fast! It was soaked wit PB blaster the night before and we spayed more on today but to no avail. What's my options? Cut the line and replace the section of line that...
  17. 3

    Holley carburetor issue

    I helped my friend install a new power valve in his 650 holley. We scraped all the old gaskets off the surfaces, installed the new valve and put it back together. When we started it up, fuel was spraying from the vent tube. It wasn't pouring out but you could see a light mist of fuel coming out...
  18. 3

    Anyone running Comp 284S cam

    Anyone here running Com Cams 284s solid flat tappet cam? I was considering swapping out my 274XE cam for it possibly or something similiar. This brings me to my next question: What would I need to do my '74 heads(rail rockers) in order to make it an adjustable valvetrain? I think somone...
  19. 3

    Are '74 351w heads "rail rocker" heads?

    I was just trying to prove a point to a buddy of mine who tried to tell me they were not rail rockers on that year. BTW, they would make a little more power on a late model 302 because they have 60cc chambers
  20. 3

    Are '74 351w heads "rail rocker" heads?

    How can you tell the difference?
Top Bottom
Back
Forums
Menu