Search results

  1. C

    Gas smell coming from vents but nowhere else?

    I have a '95 6 cyl Mustang and just recently when I have my vents going, I get a extremely strong gas smell inside the car. If I open up the hood, I can not smell anything under there or underneith the car. I don't see any fuel leaks anywhere, and my fuel lines all appear to be nice and dry...
  2. C

    EGR - Help?

    I had to replace my two heater hoses going to the heater core tonight. What I figured would be a 30 minute job turned into a nearly two hour job because of some really crappy factory ford clamps and no room to get at them. Anyways... I'll try and not go off about how much of a pain that was...
  3. C

    newbie wants '89-'92 Stang...

    Thermostat My '87 5.0 came from the factory with a 192 stat. The stock replacement part from Ford is also a 192.
  4. C

    Finally sprayed but more problems

    Realistic gains from an 80 shot of nitrous First off, this guy is dead on. G-Tech's are quite a bit off from my own experience when you compare those times to a real dragstrip track time. I believe I mentioned earlier, I have an '87 GT with an AOD, 3.73's gears, flowmaster cat back exhaust...
  5. C

    Finally sprayed but more problems

    I have an '87 GT with an AOD and I run the Edelbrock Dry 80 hp kit. I've used it for about 3 seasons now and that bottle pressure definetly is the problem there. 900 - 950 psi has been the best pressure range for my car. With that kit I knocked off around 1.8 seconds off my 1/4 et. between my...
  6. C

    Question regarding timing cover

    Thanks for the reply, good to hear that someone else has seen one on theirs. I couldn't figure out how in the heck a notch like that just would have appeared on there. I wish I knew what it was for though.
  7. C

    Question regarding timing cover

    Does anyone have any good blown up pictures of the front of a timing cover? The side that is behind the back of the water pump? I had a antifreeze leak that appeared to be coming from the bottom of the water pump, so I am in the process of replacing the water pump. After scraping off the old...
  8. C

    Any good performance parts sites for 6 cyl Stangs?

    I have a '95 6 cyl Stang that I plan on playing with a bit to see if I can get it to go a bit faster then it currently is. I'd like to know where I can find a good chip for it, a 3.55 or 3.73 ring and pinion for the 7.5 rear-end it has. It should come with a 2.73 ratio stock correct? Also I...
  9. C

    Fan Clutch on '87 GT?

    What should I check for on my fan clutch on my '87 GT to see if it is bad or not? It says on the water pump box that I may want to replace it, but I don't really know what to look for on it to see if it is bad or not. Thanks!
  10. C

    Where to find a water pump bolt kit and which ones to buy?

    Thanks guys Thanks for the help guys, I'll check out those web sites and see what I can find. I can't wait to get it put back together again. I am up in Minnesota and it's been tore apart since fall. I don't drive it during the winter and it's been too cold to go back out in the garage and...
  11. C

    Where to find a water pump bolt kit and which ones to buy?

    I just can't see spending $10 a piece for two bolts and in reality I need a whole new set anyway because the rest of the bolts look just as bad as the two that broke. I figured going with the ARP would be the way to go... but the kit won't have all the bolts I need??? Anyone know where I can...
  12. C

    Where to find a water pump bolt kit and which ones to buy?

    I am in the middle of a new water pump install on my '87 GT. In the process of removing the old one, I broke the two upper water pump bolts that go through the timing cover. I got a little lucky there, and it looks like I can just drill them out, retap the threads and put a couple new bolts...
View older results
Top Bottom
Back
Forums
Menu