Search results

  1. T

    Plasma?

    tell him the pistons will only work after he has changed the muffler bearings and his blinker fluid.
  2. T

    Installed Mgw Shifter **pics**

    i paid 180 US for the shifter and the knob off ebay. some guy bought it then sold the car before installing it. his loss my gain.
  3. T

    Installed Mgw Shifter **pics**

    setting the stops takes less then 5 mins.. put it in 3rd turn the back bolt (closest to the dash) until it just touches the shaft then back it off 1 full turn.. then put it in 4th and do the same thing with the back bolt. then tighted the 2 nuts down. put it in each gear make sure its not...
  4. T

    Installed Mgw Shifter **pics**

    i didnt take my console out, the 2 far bolts that hold the rubber boot on were a bi*ch to get out. i had my little 8mm wrench goin 1/8 turn after 1/8 turn until i finally got them out. took me about 15 mins, which is alot less then removing the console/cd player ect. i think its impossible to...
  5. T

    Installed Mgw Shifter **pics**

    i didnt really need the instructions, i only read the part about the shift stops setting, other then that it was pretty straight foreward. that rubber boot fits perfectly, no cutting needed. i wouldnt bother with the red handle, the blue is the sport shifter for the shortest shifts. red is if...
  6. T

    Installed Mgw Shifter **pics**

    Well i finally got around to installing my MGW shifter and MGW shifter knob today, and all I can say is WOW. The installation was incredibly easy, the hardest part was getting my wrench on the back 2 bolts that hold that rubber piece on, and the messy RTV. Besides that this was the easiest...
  7. T

    Front Left Brake Squeek!! Wtf

    ttt
  8. T

    Front Left Brake Squeek!! Wtf

    ok about a montha go my left front brake started squeeking.. but only while at speeds less then 20m/hr and only when the brake is pressed down lightly.. ex stop and go traffic. anyways the rotors/calipers are a month old and the pads are hawks. They are about a year old. 3 times i have taken...
  9. T

    245/45 17's on a 17x9??

    no actually my speedo is like dead on.. at 100 km's/hour its +- 2 km/hr.. when i had the 245/45/17's it was off. what do you mean by "like" 50-80?
  10. T

    245/45 17's on a 17x9??

    i have 245/40/17's all around on 17x9" rims and it looks awsome. better then 245/45's in my opinion. plus if you have any rubbing issues this will help it a lil bit as the tire isnt as tall.
  11. T

    12v Key On???

    where in the drivers side engine bay can I find a 12V key on wire? i know about the low coolant sensor but mine is being goofy for some reason.. what are my other choices?
  12. T

    Electric Fan Install - 12v Key On Wire??

    whats another key on 12v wire on the drivers side of the engine bay?
  13. T

    got a black magic extreme fan? come in here

    This morning i went and dug through my old mans turkey fryer kit because i remember it had a really good stainless steel turkey thermo.. went outside pushed that in the fin beside where the probe for the fan control is.. played around with it for bout 10 mins and got it to come on right at 195...
  14. T

    got a black magic extreme fan? come in here

    really yours is 1/8th from full cold? that means the fan will come on at like 170 degrees.
  15. T

    got a black magic extreme fan? come in here

    all you guys running these fans, where do you have your control knobs set? mine is dead smack in the middle, which is supposed to be 200 degrees... just wondering how much the probe is off by, or if it is fairly accurate? all i have are the stock gauges so im just wondering what u guys with...
  16. T

    Electric Fan Install - 12v Key On Wire??

    so i should set the setting on my fan control for the fan to come on at like 190-200 degrees?
  17. T

    Electric Fan Install - 12v Key On Wire??

    ok fan is all installed and runs killer.. its one of those new Black magic extremes' pulls 3300 cfm @ 18 amps, this fan is sweet! anyways my last question, what temp do i want the sensor set at? I have a 180 degree thermostat and the engine is stock cept for pullies/exhaust ect.. do i want to...
  18. T

    Electric Fan Install - 12v Key On Wire??

    where is there a 12v key on wire near there that i can use?
  19. T

    Electric Fan Install - 12v Key On Wire??

    im going to mount it ontop of the fan on the passengerside of the engine compartment, pretty close to the top right side of the radiator.
  20. T

    Electric Fan Install - 12v Key On Wire??

    where under the hood can i find a 12v key on wire? i need it to splice into for my fan, im halfway through the install and am at this point right now. thanks guys/girls
Top Bottom
Back
Forums
Menu