Search results

  1. a_k

    v6 engine replacement on 94 years of compatability?

    awesome thanks, we were having trouble finding older engines but alot of 00's and such so that's some good news
  2. a_k

    v6 engine replacement on 94 years of compatability?

    Hey everyone my friend has a 94 v6 with a blown motor. We're going to put a new one in and we were just wondering what years we could use, 94,95,96,97,98,99,00? Sorry about my lack of knowledge here but thanks alot for the help:flag:
  3. a_k

    just dove my 331 first time few questions

    ill do that. I was just talking about the fuel smell in the oil
  4. a_k

    just dove my 331 first time few questions

    thanks guys. I just got another 15 miles on it and my oil line to my guage is leaking now and causing tons of smoke so I had to stop driving it. I changed my oil again before the drive and there is still a faint smell of gas from the dipstick. I think there is way to much fuel with the 30lb...
  5. a_k

    just dove my 331 first time few questions

    i have not but yes the maf is put in correct. Now that I think about it it was only at around 3500 on load when it would do it then it would go off after i slowed it back down
  6. a_k

    just dove my 331 first time few questions

    What I did was drive it slow a little and once it warmed up i did some 3rd and 4th gear pulls and some decells. I only have about 15 mins on it. I stopped because it was puring black smoke. I overfilled my power steering:notnice: anyway right now my fuel pressure is set to 39 with the vacuum...
  7. a_k

    just dove my 331 first time few questions

    sorry double post.
  8. a_k

    lebanon valley wednesday nite

    sorry to hear that, that sucks
  9. a_k

    what cold air fits?

    I have a 75mm acuufab throttle body with an 80mm PMAS and I was wondering if someone could point me in the right direction to a cold air that fits.. Thanks!
  10. a_k

    what size water pump bolt

    Thank You!
  11. a_k

    what size water pump bolt

    I tried calling the dealer and they couldnt help, You guys know the bolt that is very close to the harmonic balancer? I fired my car up for the first time last night and its leaking:notnice: because I forgot to put one in because I couldn't find one. If anyone knows the size that would be...
  12. a_k

    fuel leaking out of my regulator

    well i'm stupid I finnally got the time to go down and I didn;t oil the o ring and it broke:notnice: oh well quick fix no big deal:nice: thanks guys
  13. a_k

    fuel leaking out of my regulator

    yup unfortunatly it is on the rail underneath the regulator:notnice:
  14. a_k

    Intake help to 75mm accufab

    I had a homemade cai last year and it worked great but thise year I can't get anything to fit over the throttle body. I want to buy an intake, besides it will look a little better anyway. I also have an 80mm PMAS I was hoping you guys could help me out I dont want to order something that...
  15. a_k

    fuel leaking out of my regulator

    I got an adjustable fuel pressure regulator and I'm real close to firing everything back up. WHen you prime the key a very small amount of fuel leaks out the backside when the pressure reaches around 40 psi. It seems the O-ring didn't do the trick. Is there some type of sealant I could use...
  16. a_k

    Last few questions before firing up

    Yeah, I primed the pump a week ago or so and dropped a 1/4" socket down the dist hole:notnice: , I had to drop the oil pan, anyway I told ed that I wanted to try to get close to 400rwhp with low 12's high 11's daily driver and he sent me that cam. Thanks for the help
  17. a_k

    Last few questions before firing up

    I'm going to try to start mny car today. Here is my combo, eagle 331 w/ je pistions afr 185 heads, ed c cam with a .605", .598" lift 112 lobe separation and 228, 234 duration, 75mm throttle body, 80mm pmas, 30 lb injectors, rpm2 intake ect...... My few questions are the firing order that I...
  18. a_k

    Alternator hits my Anderson Valve covers

    well this sucks so I have to take that side off and have someone cut it out and weld in a peice? I'd even buy a smaller alternator if I could or there isn't a bracket where I could relocate to where my air pump used to be?
  19. a_k

    Edelbrock rpm 2 intake help

    HEy everyone, most of the stuff I'm doing getting this motor in my car its my first time. I just was wondering if you guys could help me get this together I just needed help on what goes where because I didn't know if it mattered. Also I deleted my egr and air pump so I was wondering what I...
  20. a_k

    Alternator hits my Anderson Valve covers

    Is there ANY way around this besides clearancing the valve covers, I really don't want to do this. I was thinking about shimming it out a little bit but that would probably throw the belt off. Any help would be appreciated:flag:
Top Bottom
Back
Forums
Menu