Search results

  1. bchampion

    ? About Sanden Conversion & Belts

    So I have my new Sanden installed and have a few questions concerning belt routing. From what I can see, the pulley on the compressor is perfectly lined up w/the pulley on my alternator. Can I just get a longer belt and run them together off the crank? If I have to use my idler pulleys from...
  2. bchampion

    Sanden Idler Pulley Bracket '68 Mustang

    Sanden Idler Conversion Bracket No, I already have that bracket. I need the bracket for my idler arm to be able to adjust the belt. This is the bracket I'm looking for. Scroll down the page and look for Part CAA07183 - Sanden Idler Adapter Kit. Ever heard of these guys?
  3. bchampion

    Sanden Idler Pulley Bracket '68 Mustang

    Does anyone know where I can get the bracket for a Sanden compressor so I can bolt my factor A/C idler pulley to it? I have the mounting plate for the compressor to factory York bracket on the block. Thanks,:bang:
  4. bchampion

    i need a new intake manifold

    Which Intake Weiand Stealth all the way, unless your going for some super HP Stroker.:lol:
  5. bchampion

    Sanden Compressor Model #

    When doing a Sanden A/C compressor conversion (1968 SB specific), what is the model # on the Sanden compressor that comes in the current conversion kits out on the market? Thanks,:nice:
  6. bchampion

    Whats a used C4 worth?

    Used C4 Worth I got a $150 for mine when I did the T5 swap in my '68. It was excellent working order.:nice:
  7. bchampion

    Help w/'68 Leaky A/C

    I have converted the old unit to run R134 and it seems to be working fine except that it leaks all of the 134 out after about a week or so. So I put some dye in it to see where it is leaking from. It looks as if all of my connections are leaking, hoses to compressor, expansion valve and the hard...
  8. bchampion

    68 A/C question, please help...

    A/C Problem Did you pull the a/c switch panel and check to make sure everything is connection properly? Looking at my wiring manual, the power switch starts there.
  9. bchampion

    1968 control valve removal question

    Control Valve Questions Go down to AutoZone and rent a Pitman arm puller. It will come right off w/out damaging anything.
  10. bchampion

    How Many 15oz Cans of R134a?

    I've converted the factory air in my '68 to take R134a (yes York compressor, everything else new). Anyone know how many 15oz cans will it take? Thanks,
  11. bchampion

    Reverse Lights Not Working After T5 Intall

    Alright, could the reverse ligth switch in the T5 be bad. I have the T5 reverse harness spliced into my original harness using the black w/red stripe wires. The red w/blue stripe are for the Neutral safety switch, which I have hooked up to the T5 and it works fine. I've checked the harness and...
  12. bchampion

    68 fog light instalation

    '68 Fog Light Install What I did was install the brackets first. Make sure you have them in correctly, if you don't, when you hook up the lights, they will point straight down. Anyway, once you have the brackets installed, you can hold up the light to the grill to see where you will need to...
  13. bchampion

    T5 Clutch Fork Cover ?

    Clutch Fork Cover Bolt Size And the winner is 6mmx1.0 8.8 Hex Head bolt. :nice:
  14. bchampion

    Dual Master Cylinder Installation

    Dual MC Install 1) Yes, Bench bleed the MC before you install it in the car. It could get a little messy w/the brake fluid spilling out in the engine bay. Brake fluid loves to eat paint.:( 2)Push rod is held in the MC w/a clip. Once engaged, it aint coming out so be sure you push rod is the...
  15. bchampion

    T5 Clutch Fork Cover ?

    Thanks, Well I know it's not M5-.80x10, to small:mad: . Another trip to Lowe's. Thanks guys.:SNSign:
  16. bchampion

    T5 Clutch Fork Cover ?

    Ok, one side of the clutch fork cover has the clip and the other side uses a bolt/screw. Can someone tell me what the thread is on that screw/bolt? I don't trust the clip to keep it in place on the bell. Thanks,:nice:
  17. bchampion

    '68 MC Pushrod Length

    Does anyone know the length of the MC push rod for a '68 Mustang w/manual drum brakes and manual disc brakes? Heck, throw in the length for PowerDiscs if you have it.:nice: Thanks,
  18. bchampion

    '67-'68 GT Rear Valance Quality

    I would like to replace my non-GT valance with a GT valance w/the exhaust cutouts. I've heard that the repops that most of the vendors sell are total CRAP!!!:nonono: I've heard that NPD is supposed to have new & improved better fitting repops. Has anyone tried them and are they worth a...
  19. bchampion

    C4 to T5 Swap U-Joint ?

    Finishing up the C4 to T5 swap on my '68FB. Using the C4 yoke, my drive shaft is to long. I have a T5 yoke from an 87-93 Mustang that will be just right so I won't have to shorten my drive shaft any. :nice: Anyone know which U-joint I need to use? Is something that I can just run down to...
  20. bchampion

    Please Post Your Gas Mileage

    Gas Mileage 2005 GT 5-spd, I get about 15.4 in the City and about 25.7 hwy w/cruise at 72mph. Those numbers are only good if you keep you foot out of it.....:nice:
Top Bottom
Back
Forums
Menu