Search results

  1. S

    Back right tire likes to squek!

    check your torque boxes also, kind of sounds like what happened to me
  2. S

    Magnapack Catback Problems

    I have had mine on for a couple of months now without any problems, and I am driving in the winter/salt/etc. Make sure all your bolts are tightened down enough and use thread lock on the allen bolts that hold the tailpipes in place.
  3. S

    Spring Rates

    the stiffness of a spring is as follows a 700 lb/in spring will compress 1 inch when 700 lbs of force is applied to it. Therefore a spring with a numerically higher spring rate will be stiffer. I plan on adding H&R race springs and bilstein hds because I want my car to be very stiff. wade do...
  4. S

    new noise, possible u-joint ?

    For two days now I have noticed while at low speeds I hear a humming noise, that also sounds like metal to metal contact. My friend listened to it and said it was most likely my u-joint. Does this sound like a possibility, and if so, should I replace just the u-joint or upgrade to an aluminum...
  5. S

    another lca question

    I have MM stnd LCA's that I got for $180 and I love them, noticed a difference the first corner I took.
  6. S

    Suspension or more hp

    come June I plan on doing a supercharger or cams from MPH, both would need a tuner so I was going to wait to do that, what would be better to do now.
  7. S

    Suspension or more hp

    I am trying to decide what to do next, either do suspension mods or power mods. My choices are: 1.) Accufab TB and Plenum 2.) H&R race springs, Bilsteins, and MM cc plates I know the prices are very different, but what will make the most difference for a daily driver. In the...
  8. S

    Steering Rack Bushings ?

    I only really notice the problem late at night when it is very quiet outside and it has been happening for a long time, so I don't think it is a major problem, but one I might as well fix.
  9. S

    Steering Rack Bushings ?

    For a long time I have been noticing a clattering noise at slow speeds when my car is turning at full lock. I believe this is from the SR bushings. I am going to replace them when I do the rest of the suspension. Should I get the aluminum or polyurethane versions, and how difficult are they to...
  10. S

    help, new bad problem

    yes, I believe it is the original battery and it is cold outside, but could the battery be responsible for the speedometer not working, and the car stalling. That just did not deem like a possiblility to me.
  11. S

    help, new bad problem

    Tonight after work I stopped somewhere and left my lights on by accident for about an hour. When I went to start it back up all I heard was clicking, battery dead. I waited a few minutes with lights and everything off and it started, a little rough, but it started. Now, my speedometer does not...
  12. S

    Help (exhaust fasteners)

    yes, but what size nuts and bolts are needed to bolt together the two flanges, nothing came in either kit as far as bolts to connect the midpipe to catback?
  13. S

    Help (exhaust fasteners)

    I am going to be replacing my poor custom exhaust with a mustang tuning x-pipe and a magnapack catback. The problem is my custom system is fully welded. What fasteners do i need to buy to attach the midpipe to the catback? I am going to be doing the install on friday so I need an answer fast...
  14. S

    exhaust leak

    I have an exhaust leak somewhere in my system that is driving me nuts, I am replacing the exhaust but is it ok to drive around like this, the car just doesn't feel the same with this problem?
  15. S

    exhaust gasket ?

    I will be replacing my exhaust in about one week and I was wondering if I should buy a new gasket for between the manifold and midpipe, my car has 45000 miles? Also any tips to make this job easier would be great. Thanks
  16. S

    Pro-dumps or tailpipes

    I am replacing my exhaust this week and I want opinions on whether or not Pro-dumps will be too loud for a DD? I like loud but I don't know if it will be too loud. I also ordered a cat-less mustangtuning x-pipe. If I don't order the pro dumps I will order a mac cat-back. I plan on adding a...
  17. S

    Clutch question

    I noticed today when I powershifted third my clutch squeeled. Does this mean my clutch is burning out? and if so, how long do I probably have before I need a replacement? The car was cold when this happened so I am not sure if it was more because the clutch didn't have any heat in it.
  18. S

    help ASAP

    I just wanted to clarify, one of my wheel studs is stripped and I need to press a new stud in. Is this difficult to do and do I need to remove the axle to do so? I have already taken my rear rotor off and I will try to press out the stud tomorrow morning, can't someone help?
  19. S

    help ASAP

    Today I was starting to install some MM LCA's and I ran into a serious problem. One of my Lug nut bolts is stripped. I need to replace it. Has anyone done this before. I know it needs to be pressed in but can it be done with the axle in the car? I want to get this done as easily as possible. Any...
  20. S

    Suspension question

    I am thinking about buying the maximum motorsports starter box which includes bilsteins, H & R race springs, isolators, and cc plates. I use this car as a daily driver and I somethimes get stuck out in the snow. Will doing this upgrade negatively affect winter handleing or will it improve it? I...
Top Bottom
Back
Forums
Menu