Search results

  1. wlink1

    What kinda HP numbers

    Yeah 15.01 with the gtech at 3700 lbs just guessed. Was yours weighed with you in the car? Is the E cam going to work good with this setup? Also think I am going to a lightning mass and 24lb injectors? So 13.9X after all these mods are completed? I can be happy with that would like to get to...
  2. wlink1

    What kinda HP numbers

    That was my thoughts but a few people I had asked said it made a difference, may look into subframe connectors
  3. wlink1

    What kinda HP numbers

    15.01 was with Explorer Intake BBK 75mm trhottle body with TF elbow Underdrive Pullies Off road H-pipe 40 series flows No timing advance 87 octane and a bad harmonic balancer. Which is the best way I have heard that a vert will run faster time with the top down?
  4. wlink1

    What kinda HP numbers

    Stock 302 Block GT40P heads with just a 3 degree valve grind 1.6 roller rockers E303 Cam or similar Explorer Intake BBK 75mm trhottle body with TF elbow Underdrive Pullies Off road H-pipe Shorties 40 series flows 15 degree timing adv. Just trying to see what kinda HP numbers and...
  5. wlink1

    Is this a good price

    So i could use a fox trans if I use a fox bellhousing and vice vera? Thanks
  6. wlink1

    Is this a good price

    bellhousing, blockplate, shift fork, clutch cable, 5sp pedal assembly, tranny to bellhousing bolts and bellhousing to engine bolts. $230 Also what is the difference between fox t-5 and sn t-5?
  7. wlink1

    Bad shake

    I got the Pioneer industries from Advance I read a couple other people used that one and had no problems. Probably change to a Romac or Heavy Duty one once I put the turbo set up on still trying to piece it together
  8. wlink1

    head question

    Thanks, I just found them for sale and wasn't sure if they were any good, think I am just going to keep saving and possibly get some thumper or GT40heads
  9. wlink1

    Can anyone nail down why my car is squeaking when I hit the accelerator???

    MY BBK sounds like a bird chirping everytime I hit the gas
  10. wlink1

    Bad shake

    thanks it was the HB changed it out tonight and it was starting to seperate
  11. wlink1

    head question

    How would these heads compare to the E7 and GT40. 1966 289 Hi-Po Heads C60E 54cc 1.67/1.45 Stainless Steel Valves With Screw In Studs And Heavy Duty Springs Worked Fine On a 302 +.30 With a Comp Cam .541/.544
  12. wlink1

    Bad shake

    no physical inspection yet but checked while holding the brake in drive and reving and no out of the ordinary twisting of the engine, going to check my HB as I found alot of people with the same problem. Thanks also looked at the trans while idling and doesn't seem to be moving at all
  13. wlink1

    Bad shake

    My car has a really bad vibration when at idle, doesn't make a difference if in park or in neutral, still shakes. Didn't know if anyone had any sugestions. Also car seems not to have the reponse it did before this problem started. The only thing I could think of was motor supports or trans...
  14. wlink1

    couple ? trans and gear install

    How much difference between and fox body auto trans and my 94 Auto? Found a fox auto B&M shift kit, 2500 stall and trickflow deep pan for $250. Just bought me a set of 3.73 gears brand new for $100 how much should I expect to spend to get them installed? Thanks
  15. wlink1

    question about drag times

    I found some that are suppose to be new never out of the package, ford motorsports for $100 bucks the guy said they are just collecting dust and he never got to install them.
  16. wlink1

    looking for some opinons

    Just wondering what everyone thought, next mod? Heads and cam or Tweecer
  17. wlink1

    question about drag times

    pulled out a 15.1 @ 100mph on my G-tech with a bad exhaust leak and top down which translates to a 9.7 1/8 just not how acurate this thing is. I have had it for years
  18. wlink1

    question about drag times

    yeah that is my next mod trying to buy some 3.73 today
  19. wlink1

    question about drag times

    With my current mods what times should I be posting in the 1/8th? What does a stock AODE run in the 1/8th
  20. wlink1

    corner light lock ring

    94-98 side marker nut LRS-N621906S310 this is at 50resto.com. $.95/ each
Top Bottom
Back
Forums
Menu