Search results

  1. K

    Looking to change cams, need advice.

    will the 1.7rr fit under the stock valve covers? which is a good brand of RR? highbred: what did you get done to your heads and what rear wheel are you making?
  2. K

    Looking to change cams, need advice.

    Hey guys, I am looking to possibly change my cam (E-303) to a different off the shelf cam. It also has to be emissions friendly. I also was hoping to pick up a few more HP. Also is my intake hurting performance. I did a research on the cam question but didn't satisfy my question. thanks in...
  3. K

    is this sound detonation? please help.

    Well regapped plugs to .045 and all is well :nice: :banana: . Took the car out for a blast and no popping, sputtering or other nonsense. Thanks for all the info guys. kev
  4. K

    is this sound detonation? please help.

    No it did not do it before the tune up. I had a fouled plug on the drivers side 3rd one back. That is when i did the tune up. The car was revving around 5000 in 3rd and 4th. Temps where low between the A and L in Normal. the car always runs cool. Should i regap at .045? I had like a popping...
  5. K

    Are Autolite 3924's ok for GT40X heads?

    Well to give the short version. i had a fouled plug so i replaced them with 24's and then learned that i should have used 3924. The car A/F is running between 12 and 13 from 3500 to 6000. My fuel pressure with vac off is 45 i think i have to recheck tomorrow.
  6. K

    is this sound detonation? please help.

    Timing is at 16*. and i run sunoco 93 or 94. I took the car for a ride again and got on it and again it seems to be sputtering under full throttle. Maybe a miss it just started to do it. I just put new plugs in the other day auto 3924 and gapped them at .054. new cap, rotor, plug wires, and...
  7. K

    Are Autolite 3924's ok for GT40X heads?

    TTT
  8. K

    is this sound detonation? please help.

    TTT
  9. K

    Are Autolite 3924's ok for GT40X heads?

    Just wondering cause i just put these in the other day and today i have a popping sound (in other thread). I have them gapped at .054. Is that too much or is that ok.
  10. K

    is this sound detonation? please help.

    Under heavy acceleration in 4th (3/4 to WOT) I heard a pop sound. Is that sound detonation. I should also mention when i heard it pop i let off immediately. Also earlier when in 3rd it sounded like it was popping. I filled the tank today with Sunoco 94 about 9.5 gallons. thank you. kev
  11. K

    Attn central PA people...get-together info inside

    69fb: I emailed Nate and told him that i can't make it on the 16th i have a wedding to attend. I definitely could make it on the 9th if you guys could move it to then. I not familiar with the york area but i am familiar with the Harrisburg area/ Carlisle pike area. I know where that Hooters is...
  12. K

    Attn central PA people...get-together info inside

    69fb what Hooters are u guys meeting at on the 16th and at what time?
  13. K

    Attn central PA people...get-together info inside

    my friends and i used to frequent Wanda's in the late 90's. I haven't been down that way since.
  14. K

    Attn central PA people...get-together info inside

    Hey Nate i see you are from Bloom. I only live about 20 minutes away (MT. Carmel Area). I think i've seen your car around looks good. Not too many people in the local area with stangs that would probably hang out. Well at least i don't know of any. I wish i could make some of the dates you guys...
  15. K

    Decision time on blower. need help please.

    I just found out that the guy who has the Strim was the second owner. Well that takes care of the used one.
  16. K

    Decision time on blower. need help please.

    yeah i know they go for 1799 but i was just saying for basically the same price. only a $200 difference. What HP numbers could i be looking at?
  17. K

    Decision time on blower. need help please.

    Hey guys need some info and advice. I have the chance to buy an S-trim kit used ($1600) at the same price as a new NOVI 1000 and SC-TRIM. Which one would you recommend? Also how much HP would each one give me at stock settings. A friend said the blower is in very good condition, however i did...
  18. K

    Autolite 24's?

    thanks for the info guys.
  19. K

    Autolite 24's?

    Where should i gap auto lite 24's
  20. K

    Does this FP sound right?

    I checked the fuel pressure again and it is at 55psi on the gauge.
Top Bottom
Back
Forums
Menu