Search results

  1. 9

    Smoke at WOT

    it is setup just like factory, with new valve, screen, hoses, and grommet
  2. 9

    Smoke at WOT

    supercharger is brand new, and im not sure on there being any oil in the intake
  3. 9

    Smoke at WOT

    ive got new rings but as someone else stated that moly rings take longer to seat is that true? and the pcv is also new valve, screen, vacumn hoses
  4. 9

    Smoke at WOT

    its blue, the oil is not low and its not burning any other than at wot
  5. 9

    Smoke at WOT

    Smoke at WOT 94 GT 5.0l less than 1000miles on motor moly rings vortech s/c 8lbs new twisted wedge heads cometic mls headgaskets 140psi on all cylinders dry test no smoke on startup or cruising is this normal at wot? what would be the cause of this?
  6. 9

    odd sound from S/C

    ive got a 94 GT vortech sq trim and at idle it has and odd sound almost like a grinding sound but gone when you rev it up alittle. is it supposed to make a nouse such as this at idle? belt is not to tight either and its getting good supply of oil, sorry for no sound clips.
  7. 9

    F.A.S.T. vs. stock ECU

    im running the PMS standalone tuner on my 94 gt, i like that you dont need a laptop for this it has its own little screen. the price is at 1100 ish on my car but its worth it. you control everything fuel, timing, all that good stuff. and its probably the best tuner for a forced induction car as...
  8. 9

    94 gt valvecover ?

    im putting on my twisted wedge heads on the 94 5.0l. will the trickflow valve covers fit under my stock intake without any modification? if it does need modifications please let me know were at
  9. 9

    pushrod length

    ttt
  10. 9

    pushrod length

    94 5.0 B303 cam twisted wedge heads with 1.6rr. what length pushrod should i use for this application? i dont have the tool to do this and it sounds like a pain in the ass, so i was hoping someone here would have an anwser.
  11. 9

    pushrod length

    94 5.0 B303 cam twisted wedge heads with 1.6rr. what length pushrod should i use for this application? i dont have the tool to do this and it sounds like a pain in the ass, so i was hoping someone here would have an anwser.
  12. 9

    Ottawa, Illinois Cruise night

    June 15th 5pm-11pm downtown Ottawa talkin like 500 cars this year. hope we can get some of you guys to come on down.
  13. 9

    Pics of 94-98 Saleens?

    they are Konig 17s
  14. 9

    Pics of 94-98 Saleens?

    theres my stang
  15. 9

    H/C/I swap done!!! Tuning next?

    i went with the self tuner route in stead of the chip route. final5.0 is right on make sure you get some good references on a chip shop. i went with the PMS tuner due to its reputation and user freindly, it is pricey though but well worth it. tweecer is a good tuner as well the only drawback on...
  16. 9

    E or B cam?

    ive got a 94 gt with the b cam and your all correct its a pain but with some playing with the car alittle here and there it will idle perfect all the time. i heard all the rumors about this cam after i had installed it but it is a sweet cam and it lopes very nice.
  17. 9

    BBK egr tube...

    when i put my longtubes on my gt i bought some 5/8" soft copper and spring looking benders and cut to fit then put the stock fitting on that pipe and flared it. no need to spend alot of money on a pre made one.
View older results
Top Bottom
Back
Forums
Menu