Search results

  1. S

    o2 sensor signal wire

    thanks
  2. S

    o2 sensor signal wire

    hooking up a air fuel gauge and wondering which wire is the signal wire.
  3. S

    gt40p vs gt40 irons

    i have gt40p heads now and just bought a low mileage set of gt40 irons that are angle milled light bowl work and completly gasket matched to a set of header and intake gaskets, and mild exhaust work too.should i except a good increase in hp and which head comes with better springs.
  4. S

    Engine experts please come in...

    i had the same problem , i switched out the fan clutch and no more over heating on the highway
  5. S

    help

    i decided to chane the cap and rotor and put the new on with correct firing order which i have checked 15 times and the car will not crank. i get spark but the spark is not consistent,voltage to the coil the module is brand new and resistance in the coil is good. the car has an e cam in it. i...
  6. S

    distributor gear

    on a roller cam do you use a steel or cast iron i thing it is steel but want to be sure thanks
  7. S

    intake spacer question

    anyone running an intake spacer. can you feel a diffrence in power. my friend just gave me one for free and i was going to put it on until i got my new intake
  8. S

    GT40P HEAD SWAP HELP PLEASE

    i also have p heads which are not drilled for smog and i pulled off the smog pump and pluming, i really did not notice a diffrence. i bought my car with the heads already on it. do you know the cc on combustion chamber. i am trying to figure out if there are two diffrent sizes
  9. S

    valvetrain noise

    what spring are you running and valvetrain
  10. S

    valvetrain noise

    yeah thats what i figured. the valvetrain is all new with 500 springs.i have had 5 litres with a 130,000 and never herd valve float until maybe the rev limiter. when it hits 5800 it does not feel like the motor is doing anything unusal. igot a professional products intake on the way for so...
  11. S

    valvetrain noise

    the motor has only 2000 miles on it but feels sluggish
  12. S

    valvetrain noise

    i have noticed that when i drive my car hard , anything past 5800 rpms i here a noise i think is coming from the valve train maybe valve float. it only happens when the motor reaches 5800. it sounds like a clattering noise. i have only had this car for 2 months. it has a e cam.i was told it has...
  13. S

    intake manifold

    still got the stock intake on my car and it already has e cam p heads 70 tb 75maf 24 lb injectors. think i can really get 35 to 40 hp if i put on a good intake. i want the car to pull to the 6250 right now it pulls to about 5800 before it quits thinking of typoon professional products and port...
  14. S

    wheel tire combo

    those wheels are sweet !!
  15. S

    wheel tire combo

    anybody using 245/45/17 and 275/4017 on 17-9 cobra r wheels. or pics of cobra r wheels on fox thinking about buying a set off somebody for good price
  16. S

    harmonic balancer

    mines bad and i need one now.anybody using a stock replacement from autozone napa.
  17. S

    Which Spark Plugs are best??

    what about gt40p heads
  18. S

    compression

    i did not build the motor but maybe the ring are not staggered 180. think the cyl being that low would cause power to be down.140 is still not that bad
  19. S

    compression

    did a compression check on my motor 180 across except the 4 cyl which was 143. then found head gasket is leaking minor amount of coolant outside of the block.think this could cause motor to be down on power and think i could try to torque head back down motor is fresh with gt40p heads
  20. S

    fuel pressure

    i got a 306 with p heads e cam and othe bolt ons still got stock intake manifold.i just purchased a adjustable regulator because i think its running rich because it has 24lb injectors and it feels like a dog any idea were i should set fuel pressure
Top Bottom
Back
Forums
Menu