Search results

  1. Fox_84

    Help with door panels! Pix!

    Bump....any help at all???
  2. Fox_84

    Help with door panels! Pix!

    I am converting the fox over to black interior. I already bought carpet from 50resto. Soon to buy seats. I plan to buy all other panels on ebay and elsewhere I can get them, wherever that might be. I am looking to buy door panels soon and was wondering what the ones from 50resto looked like...
  3. Fox_84

    shock removal??

    I actually came across the same thing. is the nut you took off down in interior body panel same area as the shock or is it outside of that. there is a plug that just simply seals a hole or it might be a bolt to mount the frame to the body, but the nut you are talking about goes to a bolt that...
  4. Fox_84

    electric fan good or bad!!??

    What is the Airflow: Cu. Ft./Min. what rpm is the fan motor? An electric fan is usually a better cooling source if it is a nice fan with a lot of air pulling power. However if it is not a really killer air moving fan, it is hard to beat a shroud/fan setup. Also a lot of electric fans you can...
  5. Fox_84

    fuel line questions

    Anymore ideas on what I should do? Any help at all???
  6. Fox_84

    fuel line questions

    So i can go with bigger than factory lines just so long as I put a larger pump, even with my stock engine until I go larger? What size line/pump combination should I go with to handle 500+hp? Should I go with stainless steel braided rubber hose or steel lines? What setup all together would be...
  7. Fox_84

    fuel line questions

    I have to change out the fuel lines in my 93 gt, feed and return. Right now the car has the stock 302 with no work at all. In the near future it will have a built 302 possibly blown but regardless, the goal is 500hp, maybe a little more. Since I have to replace lines now, do I go ahead and...
  8. Fox_84

    Upper Control Arms: what do they do?

    Man to be quite honest, boxing your factory control arms will have to add some strength but I would guess still far more flex than control arms designed to take the abuse. I have several parts from MM on my car and I love every one of them. Granted they are expensive, but I feel worth it.
  9. Fox_84

    fuel line help

    Please someone!!! Is the return line 1/4" and fee line 5/16" or 3/8"??? What is the AN all about. what sizes in AN do I need? -4AN and -6AN???
  10. Fox_84

    Difference between saleen wing on notch and hatch

    I dont have to have $300 for it, but I would like to have say somewhere around $195 + shipping.
  11. Fox_84

    Upper Control Arms: what do they do?

    You can run just the uppers, but there is actually less benefit from the uppers than from the lowers. Most of the time if you are just gonna replace one (uppers or lowers) most people choose to replace the lowers. I would most definitely replace the lowers and depending on what you are doing...
  12. Fox_84

    Difference between saleen wing on notch and hatch

    I am going back to stock, but I could not trade you even. The saleen wing is near $300 plus paint. Email me at [email protected] if your interested.
  13. Fox_84

    Difference between saleen wing on notch and hatch

    I have a saleen wing, painted black on my hatch now and plan to sale. If the money was right I would sale now. Let me know if interested.
  14. Fox_84

    fuel line help

    bump.........any help at all???
  15. Fox_84

    fuel line help

    I installed weld in through the floor subframe connectors and now my fuel lines hang lower than I would like where it crosses the connector on the passenger side. I am going to cut the two lines and splice in a stainless steel flexible line to relocate where it crosses the frame going grom the...
  16. Fox_84

    Dumped exhaust

    The easiest and cheapest way to have this done is go to your local muffler shop and have them use regular exhaust tubing and bend a 20-25 degree angle in it and cut off your factory right behind the muffler and weld on the made elbows. Dont spend your money on some fancy tips, they are not seen...
  17. Fox_84

    Need Brake HELP

    I am wanting to put 99-04 disc brakes on my 93 gt. I have the brackets from North Racecars to mount the calipers in the rear. What else do I need? I also have the spindles from a 94 v6 mustang. Besides the front and rear calipers and the caliper brackets that the calipers bolt to, what else...
  18. Fox_84

    Do I have all I need for brakes?

    HELP!!! ANYONE. Can anyone help me out here, i dont wanna buy a crap load of parts from the junkyard and not even work or need them. Please help!
  19. Fox_84

    Do I have all I need for brakes?

    I am going to the junkyard Friday and need to know what I am forgetting or if I have something wrong? Wanting to go 5 lug, 4 wheel disc, and do it the best way possible. If there is something I am forgetting or have something wrong, let me know PLEASE AND THANKS in advance. And o yeah, I am...
  20. Fox_84

    94+ brake swap experts

    I already have the brakets to install 94-04 calipers on the rear and keep stock track width. If I get 94-95 spindles, can I go with any year 94-04 calipers on the front and rear? Also where do I need to get master cylinder, prop. vavle, and all other components for the install?
Top Bottom
Back
Forums
Menu