Search results

  1. C

    3G question?

    I am installing a new 130 amp alternator. I did a search for installion tips already. Several sites conflict each other. Do I connect the 2 large black and orange wires and tape them off, or do I put ring connectors on each one and connect them to the back of the alternator the same place as...
  2. C

    Motor mount change

    Oh yeah, thanks for your help Hissin50. I listened to your tips during the install. My fan now has plenty of clearance in the shroud, and the motor seems tighter when driving. The latter is probably in my head but who cares.
  3. C

    Motor mount change

    I installed the mounts yesterday. It took several hours or more to do. This was mostly because Autozone gave me two of the same mounts in the correct boxes for right and left. And like someone mentioned the nuts from the old mounts will not fit the new ones, and the new mounts don't come with...
  4. C

    Melbourne area stangs

    Wow, this almost made it to the end of the second page. I never seen that happen before.
  5. C

    Trick Flow head combo

    I have a set of TFS Twisted wedge street heads w/2.02 1.60 valves, and 1.70 rockers. I have a stock short block. I have been told to get a Crane 2031 cam and a Edelbrock Performer intake to complete my street/strip package. How does this H/C/I combo sound? Or what intake and cam combo would...
  6. C

    Motor mount change

    Wow it's that easy. I don't need to loosen the tranny mount or any hoses or lines anywhere when I jack the engine?
  7. C

    Motor mount change

    I am going to change my motor mounts tomorrow. Besides taking out the motor mount bolts and jacking up the engine, what steps need to be taken?
  8. C

    Fan keeps rubbing Fan shroud

    I just priced motor mounts. For some reason the conv. mounts are cheaper than the hardtop mounts. Does anybody know why? My fan is almost hitting the bottom of the shroud and I need new ones. Will the conv. mounts work with my hardtop? And if so are they better than the hardtop mounts? I...
  9. C

    electric fans ?

    I just received a electric fan set up. It has two fans that mount on the radiator. They were used on a 5.0 car that was used for drag racing. I don't know what company made them. The hot wires for each fan are wired together as are the ground wires for each fan. I plan to use a toggle switch...
  10. C

    Aluminum Driveshaft

    The weight savings is marginal. But your talking about the rotating mass here, this makes it a really good weight saving mod.
  11. C

    HCI combo question

    Yea I just edited that post. I know that is high, and I don't believe that. I was saying what TFS said.
  12. C

    HCI combo question

    Does anybody know if the valves will hit the pistons?
  13. C

    HCI combo question

    The TFS tech said to get the stage 2 cam and street or track intake and expect 400 hp with the correct additions. ie 24 lbs injectors, 190 fuel pump, afpr, 65 TB, & 75 MAM. Does this sound about right? I'm spending alot of money here to have a bad combo. I know that 400hp is high, I'm just...
  14. C

    HCI combo question

    bump
  15. C

    someone tell me to get some gears!

    They are 2.73's. Spin the tire one rotation and count how many times the driveshaft turns to confirn it.
  16. C

    HCI combo question

    In another thread I stated how I just figured out that the heads I'm getting are TFS twisted wedge street heads, 2.02/1.60 valves. Comes with 1.7 TFS rockers and pushrods. A E-303 cam is comming with the heads also. My question is will the cam or another better cam work with these heads and...
  17. C

    What heads are these?

    They are Trick flow Twisted wedge street heads, 2.02/1.60 valves. I called the company today and they confirmed it was there heads. They are used but have just been redone and are ready to be bolted on. I just have to work out the price with my buddy on them and several other parts. What...
  18. C

    What heads are these?

    I have been looking on some of the major head manufactures web sites and cannot find this as a part number for their heads. (SN 30792-3).
  19. C

    What heads are these?

    A buddy of mine just bought a bunch of mustang parts, he got a set aluminum heads with the parts. He wants to sell them to me, but I need to find out what they are. The guy that sold them says they are AFR heads, but they don't have any AFR logos anywhere on the heads, or any other logo for...
  20. C

    check engine light on after x-pipe install....

    I had the codes pulled at Autozone today. It only showed an 11, they said that just meant test. They couldn't get it to show a problem. It came on once in awhile on the way there, but has not came back on since. Now I am really confused. I was going to buy 2 new 02 sensors but they were 40...
Top Bottom
Back
Forums
Menu