Search results

  1. Chietala

    1.6-1.7RR pushrod difference

    :lol: Wow don't know what i just did there but if you read them both it should help!!
  2. Chietala

    1.6-1.7RR pushrod difference

  3. Chietala

    1.6-1.7RR pushrod difference

    It's the distance from where the rocker pivits <--- (not sure if thats spelled correct??) on the pedestal/stud to where the pushrod meets the rocker. The closer to the pedestal/stud the higher the ratio rocker. Pushrods are the same... Rocker size is the same...
  4. Chietala

    302 BLOCK

    Id be sure it's a roller block because they didnt go roller until 93 (in trucks). What did it come out of?? Also if its not roller and you want the roller cam to work your looking at a $500 set of lifters. If the block is bare check to see if the lifter galley has been machined for lifter...
  5. Chietala

    93 Lincoln 302 block same as 89 mustang 302

    Ok so I found out It is a 92 roller block. Not sure yet if the heads are E7's. Havent seen them yet. When I checked the pistons for ring positon I found that they both have valve reliefs, The top ring is in the same position, the GT piston is forged and the lincoln is cast. I found they also...
  6. Chietala

    Torque specs for 89 mustang 5.0 motor???

    Right on thanks guys!
  7. Chietala

    Torque specs for 89 mustang 5.0 motor???

    Anyone know were I can find the torque specs for the 89 5.0 motor? Crank all the way up to the intake manifold. Thanks!
  8. Chietala

    93 Lincoln 302 block same as 89 mustang 302

    As far as I know in 93 they went to Roller motor 1 piece rear main and E7's
  9. Chietala

    93 Lincoln 302 block same as 89 mustang 302

    All I'm going to be using is the block. I just havent seen it to see if it's roller or not. Do you know what heads are on it??
  10. Chietala

    Hey guys what's up? 650 RWHP Qs?

    This might be in your price range. http://www.fordmuscle.com/archives/2005/10/BuildersNotebook/index.php
  11. Chietala

    93 Lincoln 302 block same as 89 mustang 302

    Got the call from the machine shop today. Block is cracked in more than 10 places. (Thanks to the Montana sub-zero temps.) I know a guy who has a 302 from a 93 lincoln but Im not sure if this is a roller block?? I know the ford trucks werent roller until 93 but I'm not to sure about...
  12. Chietala

    f303 0r b303 camshaft ?

    My B dosnt like to be anywere under 3500 rpm's. ... although sometimes the stronger powerband up higher leads people to believe they have little power down lower.
  13. Chietala

    f303 0r b303 camshaft ?

    Are you looking for performance or sound? Modify your exaust to get the full sound out of the cam. B303 W/1.72's, o/r xpipe, 2 chamber flows dumped. http://vids.myspace.com/index.cfm?fuseaction=vids.individual&videoid=1302239057 Notice the idle is above 1000. It's way more agressive...
  14. Chietala

    GT40's or GT40p's???

    Yeah I think I checked with that guy and he said he would rather get rid of them locally because he doesnt want to deal with shipping them. That would be sweet if your interested in helping. Let me know.
  15. Chietala

    C-4 OR 5.O

    hahaha... Only in a Mustang forum will someone tell you to pick a 5.0 over a 5.7 Vett. Those l98's may not have the simplicity of the Lego like set up of the 5.0 but It's replaced with power. Also has aluminum heads. I put a Lt4 hot cam kit in my 89 Iroc L98 and ran with 345hp LS1's all day...
  16. Chietala

    need good valve springs for gt40p heads

    Ahh I see... Do you have yor dyno sheet scanned to the computer yet? Just curious where and what kind of power your making with your set up.
  17. Chietala

    Thinking of rebuilding my engine

    I'm doing the same thig right now. block stripped, hot tanked, Magna flux, New plugs, cam bearings and honed was $160 Rebuild kit from summit (with out pistons) (with felpro 1250) $240 Typhoon intake gasket kit from calmustangs $28 Plugs, oil, oil filter, thermostat $70??
  18. Chietala

    need good valve springs for gt40p heads

    6500 with an E303??
  19. Chietala

    question about my cam

    B303 will wake up you powerband and put that typhoon to work. Defenitly not going to hurt performance. Unless you stay under 4grand and plan on towing a boat. I think you've seen this before but here's a vid of my b303 w/1.72's and typhoon...
  20. Chietala

    Help me decide on heads

    You have a good tune and your fine with a set of heads.
Top Bottom
Back
Forums
Menu