Search results

  1. RGS0907

    difference between Dextron III and Mercon?

    From what I understand, they have now pretty much merged. I just had my C6 rebuilt & they put Dextron in.
  2. RGS0907

    who can guess on what numbers i might run

    The carb is probably OK... What rear axle ratio do you have?
  3. RGS0907

    I need a new C6 Flex plate today!

    Found one at Fatsco Well the one that I found at "Fatsco" is not OEM so I hope that it's not a POS. If it works out, I'll post it. Fatsco is supposed to have transmission parts for nearly every car out there.
  4. RGS0907

    HOW MUCH DOES A 67 FASTBACK WEIGH

    About 3100 lbs. An automatic trans will add some weight to that.
  5. RGS0907

    I need a new C6 Flex plate today!

    Fatsco Well I got one from Fatsgo, but I have no clue about the quality. No one has any experience with this?
  6. RGS0907

    I need a new C6 Flex plate today!

    My trans rebuilder is asking me for a new flexplate (flywheel) for my 1969 428CJ C6... does anyone have any experience with the repos that I've seen out there? Or should I buy a used one? The car is apart right now & I need to do something today, anyone have any ideas?
  7. RGS0907

    What radio options avail in 67 Mustang?

    Yeah, that's what I figured. Well the deep pockets crowd can always go for the $300 billet aluminium piece!
  8. RGS0907

    What radio options avail in 67 Mustang?

    I heard that $100 bezel was a POS Has anyone actually looked at one of these things? I called one of the suppliers ( I forget which) & the guy on the phone went to look at one & was not too impressed with it.
  9. RGS0907

    5 Lug Bolt Patterns

    Well, I tried a junkyard spare from a big Mercury today. The bolt pattern is very slightly off & I couldn't get it on my 1969. I even had a bolt pattern drawing with me & the spare was so close that it looked like a match... Any suggestions? Is there a specific vehicle that I should be looking...
  10. RGS0907

    Ballast Resistor

    resister There is a resister wire between the ignition switch and the coil. If you replaced that wire, you need to put the resister in.
  11. RGS0907

    5 Lug Bolt Patterns

    I never heard that. What do the cars that come with donuts do?
  12. RGS0907

    5 Lug Bolt Patterns

    Hey, that's what I needed to know! I'll hit the local junkyard this Saturday & look for a big Ford/Lincoln up to 2003.. Thanks. Otherwise I'll go with the 14x5" idea with a C78 tire.
  13. RGS0907

    5 Lug Bolt Patterns

    Thanks. Maybe I should just get a small rim for a 1969, say a stock 14" and get a small tire for it. All I want is a reliable spare.
  14. RGS0907

    5 Lug Bolt Patterns

    Thanks.. But does that mean that I can't use any of the donuts in anything newer than mine? I have an original space saver spare that's 35 years old. I wanted to replace it with a nice small donut that I can use whenever I'm driving the car & I'll also get some extra room in that tiny trunk. Do...
  15. RGS0907

    5 Lug Bolt Patterns

    I'm looking to find a spare in a junkyard that I can use in my 1969. Does anyone know if the new bolt patterns are the same on all current Fords & will they fit on the 69's? What about the Taurus rims?
  16. RGS0907

    Newbie Help Pls

    Didn't you say that you have a lot of rust? I wouldn't be worrying about changing engines right now. Your first question was about carbs. I would just replace the 1BBL that's on there now with a new one & get the car drivable for a couple of hundred before spending thousands to swap a new engine...
  17. RGS0907

    One for all the Shelby Cobra experts

    When I went to one of my first SAAC meets in the 1970's at Hershey, PA, there was a beautiful Daytona Coupe on display that got damaged because dozens of people were rapping their knuckles on the car. They wanted to see for themself that it was really aluminum bodied. Well, aluminum flexes very...
  18. RGS0907

    Embarrassed

    I recently asked this question. Yes the grille needs to be cut. I hear that there may be a template available from Glazier's Mustang Barn
  19. RGS0907

    Make my '67 Coupe Handle

    The Rear Bar reduces Understeer Actually an oversteering tendency will be reduced by locating the anti-roll bar at the front where it will reduce the cornering force and adhesion of the front tires. If the vehicle understeers, the anti-roll bar should be located at the rear.
  20. RGS0907

    what do I need to hit 11.99?

    Unscrew the radiator cap & drive a new Viper underneath it :D
Top Bottom
Back
Forums
Menu