Search results

  1. P

    Quick Question about Wheel Sizes for 67

    Well I got the wheels and test fit them, no spacer. What do you guys think?
  2. P

    Quick Question about Wheel Sizes for 67

    That seems to suggest that a 17x9 would not fit on a 67, just 69 and 70, even on the rear. But I could have sworn there are some people on here running a 17x9 on a 67 on the rear.
  3. P

    To Paint or not to Paint, that is....

    You could do paint but instead of blue, paint it aluminum. It's how I did mine and it looks really good.
  4. P

    Quick Question about Wheel Sizes for 67

    I am about to buy some wheels from a friend of mine. He has 4 17x9 black bullitts. At first I thought he just had 17x9s in the rear and the fronts were 17x8s but he has 17x9s all the way around. Anway, I have a quick question. I know the 17x9s should fit without issue on the back but I don't...
  5. P

    Rims don't fit!

    I have a question to add. I was looking to pick up some 17x9s bullit wheels that fit 99-04 Mustangs. As I understand they will fit will a 1" spacer on my 67. Is that right?
  6. P

    Bizarre alternator and starting issue

    I don't know right now. I know it wasn't charging because I just unhooked the positive post on the battery to see if it would stay running. It died immediately. This was before I hooked up the trigger wire. I wasn't able to measure the voltage or unhook the battery once I hooked up the trigger...
  7. P

    Bizarre alternator and starting issue

    On second thought, do the 3G alternators need to be externally grounded? I figured they were internally grounded but maybe not? If so could that be the root of the problem?
  8. P

    Interior Lighting Issue. Grounds?

    Fuse was blown and I think I found the grounding wire. Thanks.
  9. P

    Bizarre alternator and starting issue

    First off, I've got the 3G alternator. I took the car for a spin yesterday after honing in on the timing better. The car fired right up and ran well. Only complaint I had was that the battery was draining. This morning I discovered my alternator wasn't charging. After a little more investigation...
  10. P

    Interior Lighting Issue. Grounds?

    I hooked up my battery today to take the car on a test drive this afternoon and noticed when I opened the door my interior lights were not coming on. The lights on the inside of the door were not coming on and the map lights were not working either. They were all working fine last weekend. Car...
  11. P

    Rack and Pinion Options

    I'm going to replace the steering box one of these days with a rack and pinion. I'm aware of aftermarket racks from Flaming River and TCP (although I hear Flaming Rivers are junk). However, they are quite expensive. What other options are there? I've heard that steering racks from some Chrysler...
  12. P

    Anyone using a professional products damper?

    I bought this damper about 6 months ago Small Block Ford Balancer & Pulley Spacers with the 50 oz imbalance for my roller block. It has 3 sets of timing marks on it, does anyone know which if any correspond correctly with the factory marks using a factory timing pointer? They don't provide...
  13. P

    Need help with crank and water pump pulley combo

    After doing some measuring, I think the issue is with the crank pulley I bought. What would be the correct crank pulley to use with the C70E-8509-D water pump pulley?
  14. P

    Need help with crank and water pump pulley combo

    Yes the C7OE-D was just too big in diameter. Are you using any of the C6AEs? If not, would you sell one to me?
  15. P

    Need help with crank and water pump pulley combo

    How did the belt routing go for non-A/C with the 1 sheave water pump pulley?
  16. P

    Need help with crank and water pump pulley combo

    I think there may have been some confusion in my first post. The pulleys I have are not reproduction pieces, they are all used original pulleys. My issue is that I just don't know what the correct pulley combination is. I tried guessing but that simply hasn't worked. Which pulleys do I need or...
  17. P

    Need help with crank and water pump pulley combo

    I've been struggling with this for far too long and I thought maybe one of you guys could help. Basically all I want is a 2 groove water pump pulley and a 2 groove crank pulley that will fit a 302. I'm just running an alternator and power steering, no a/c. I've bought 2 or 3 water pump pulleys...
  18. P

    C4 Auto Vacuum Line

    I plan too because I need vacuum for my HVAC system. I suppose I could just run it off that capped nipple then.
  19. P

    C4 Auto Vacuum Line

    Thats what I figured. I suppose I'll just hook it up to an appropriate vacuum source on the carb.
  20. P

    C4 Auto Vacuum Line

    I was looking at a vacuum diagram and noticed the vacuum line running off the tree goes straight to the vacuum reservoir and not the transmission vaccum line. Also I had one picture of my old engine with the tree installed and you could see it clearly running to the vaccum reservoir. The other...
View older results
Top Bottom
Back
Forums
Menu