Search results

  1. kreymis

    WHERE TO GET 331 TUNED NEAR WESTCHESTER NY???

    Finally the 331 is in. s trim is mounted w intake setup but no belt or oil lines hooked up. im gunna idle it and drive slowly for a day or 2 then drain the oil. hopefully this weekend ill have the supercharger hooked up and driveable. i dont want to drive it too long without a tune. does...
  2. kreymis

    hood clearance issue??

    ahh crap i just replace motor mounts with new ones. i think energy suspension but i forget. they were about 130
  3. kreymis

    hood clearance issue??

    has anybody used bbk valvecovers? any problems known?
  4. kreymis

    hood clearance issue??

    will a 3/8 inch spacer with a trickflow street heat cause hood clearance issues. i need one to clear my bbk valve covers.
  5. kreymis

    Will I need a tune???

    can somebody send me a link where to buy a tweecer
  6. kreymis

    Will I need a tune???

    im about to drop in a 331 longblock, tf heads, b31 afm cam, 9.2:1, sc-trim. i have 42 lb injectors and i sent out the maf to get recalibrated for this setup. what else do i need to do to make it run good. will i definitely need a custom tune and who does it near westchester ny. can i get away...
  7. kreymis

    who sells a 331/347 longblock for less than $5k????

    ha i wish. what size injectors will i need? on the car now i have 24lb inj with a maf calibrated for 24lb. it does have a full exhaust already and a 75mm tb and trick flow street heat intake. i may have to upgrade intake as well. im looking into a 331 lb with afr 185 heads. the car has a...
  8. kreymis

    who sells a 331/347 longblock for less than $5k????

    will a cast crank hold 500 hp?
  9. kreymis

    who sells a 331/347 longblock for less than $5k????

    i wasnt planning on using a stock block. i hear it wont handle 500 hp for too long. id rather be safe than sorry. i figure i bite the bullet once and buy a decent motor setup its just that a stroker longblock is going to run me around 5k at least. then i need bigger injectors and so on. :rolleyes:
  10. kreymis

    who sells a 331/347 longblock for less than $5k????

    same as title- im interested in a new motor but 5500 is a little steep. i need something capable of handling an s-trim for my 94 gt. stock motor went bye bye the other day
  11. kreymis

    vortech intake tube???

    maybe i can get something custom made from an exhaust shop or something
  12. kreymis

    vortech intake tube???

    the vortech intake pipe from the blower to the throttlebody has a very poor fit. its a sq trim. i have a trick flow street heat and a bbk 75mm tb and the pipe from the sc is horrible. its not angled correctly adn continues to pop off. is there any kind of aftermarket tube i can buy?
View older results
Top Bottom
Back
Forums
Menu