Search results

  1. C

    mass air screens

    yeah, leave it... you will notice no difference in power
  2. C

    gonna paint my car myself

    wow, just saw the pictures, I really like the paint, I wouldn't mind it being all black. Maybe you could just paint the front clip, but the picture quality might not reveal everything. Nice car
  3. C

    gonna paint my car myself

    I was gonna say, black is very difficult, I know some of my friends painted his Mustang 2, and they spent a little over a year prepping it, and it has some imperfections. Oh well, good luck
  4. C

    PLEASE HELP just installed UPR coil overs and they rub on 245 tire!

    yeah, recheck everything, then try to find out if you can run a spacer.
  5. C

    Just Bought 91 Stang...Need some advice

    since you have the gears, get a shifter... then do a little with the exhaust. Then do Suspension, like control arms, subframe connecters etc. People run 12's with a little motor and tons of suspension stuff.
  6. C

    just braggin.. its like x-mas!

    damn, do you have a speed density 88?
  7. C

    What should I do now?? Something is definetly wrong...(Camshaft Question)

    when I backed it down a bit I noticed a very small amount of bottom end. Would it be possible that I would have to back it down more? I can't tell the difference between pinging and my exhaust. It just sounds like a chugging sound, but underneath that there could be pinging. Right now my...
  8. C

    What should I do now?? Something is definetly wrong...(Camshaft Question)

    Cast Iron Cobra Heads.... They are ported a little on the intake side and a little a lot on the exhaust side.
  9. C

    What should I do now?? Something is definetly wrong...(Camshaft Question)

    can I get some numbers, and a price on this please.
  10. C

    What should I do now?? Something is definetly wrong...(Camshaft Question)

    Well, I put on the new balancer and found my timing to be at 18* so I brought it down and have been playing with it, but nothing near the power I should have. My cam specs are (.480/.500) lift, with (210/218) duration.... I know the stock cam isn't that much different in duration, so im...
  11. C

    Will I get anything outta this crap?

    I will probably get the throttle enchancer and the spacer and the A/C Delete
  12. C

    Will I get anything outta this crap?

    thanks for the response 90mustangGT My A/C is dead and needs to be rebuilt, I am just taking it off to save weight, same with smog... I am hoping by losing all that I can lower times. But even if that Tornado thing saves gas mileage, it would be great. But I will save the money, thanks guys
  13. C

    Should i get this tranny?

    got my rebuilt T-5 out of a 92 for 400 bucks after shipping and everything (off ebay). Good deals are out there, I always seem to find the best deals about a day after I buy what I am looking for.
  14. C

    Will I get anything outta this crap?

    It was sarcasm :nice: Nobody has said anything about the Casper's Electronic Throttle Enchancer, I have found nobody who has tested this thing. And you guys talked me out of the Tornado thing... good job. Thanks for the help
  15. C

    Will I get anything outta this crap?

    damn
  16. C

    Will I get anything outta this crap?

    Well, don't have much I can do to my car and keep it naturally aspirated so I was thinking about these little things. I was wondering if anybody has any expierence with them. Motorvation Throttle Body Spacer (basically the tornado thing) Caspers Electronic Throttle Body Enchancer A/C...
  17. C

    '69 302 into an 89 5.0 (fox body newbie)

    Yes, the heads should bolt up to the block, the solid cam should work with the computer, and your stock fuel system should be fine, but may be too much lift for the heads with stock springs. I am assuming the pistons are notched for that much lift also... so it sounds good, just get better springs.
  18. C

    Iskedrian Camshafts require 4* of advance... Please help

    alright, I think I found out what DMAN was talking about, Isky advances there cams 4*'s. But I also think that this cam is just to small, especially the duration.. I would like to have the same lift but go to a 221 duration
  19. C

    Iskedrian Camshafts require 4* of advance... Please help

    All I did was line up the dots on the timing chain... I see were you can advance it to 4 or retard it... I don't know if that is what I should do or get the TFS 1 cam. With the TFS 1 won't I have piston to valve clearnence issues?
  20. C

    Iskedrian Camshafts require 4* of advance... Please help

    I was thinking about getting a TFS 1 cam, but spent about 260 bucks on this damn thing, I just want to know if I can fix this thing
Top Bottom
Back
Forums
Menu