Search results

  1. kcobra302

    Front subframe question

    i wouldn't recommend cutting the rails to make them fit. i put a very small pie cuts on either side of the subframe connectors to contour them to the existing frame rail. then welded up the pie cuts when i welded the connecters to the rail. the pie cuts were very small. maybe a 1/4 inch at...
  2. kcobra302

    motor mounts

    nice kit. i ordered it last year and just got around to doing the install. a little time consuming but very easy to do. i have headers on the king and it took me about 3 hours to remove them from the car, cut the rubber away, clean, paint, intall the poly a nd put back on the car. brett is...
  3. kcobra302

    Weight of the mustang II

    weight includes ssm bars, subs and full interior. typical changes are the wheels/tires, tubular front arms, no spare tire or jack, lots of aluminum in the engine bay, including the heads and manifold, headers and no ac. stripped out most of the componets that are not needed under the dash...
  4. kcobra302

    Weight of the mustang II

    i scaled my king several years back. came in at 3016 without driver. keep in mind it is not stock. there have been a slew of the typical mods made to the car.
  5. kcobra302

    MII Pics in Mustang 45th Web Article

    stangtv also has a pretty good article. they have a nice pic of the black king that is being discussed in the other thread. Ford Mustang Videos, News, Articles & Tech on StangTV - PowerTV Network
  6. kcobra302

    Flywheels and flexplates

    i have not been able to track down my reciept. its probably in the car but i am in the process of cleaning the winter gear out of the garage to get to the car. like i said earlier, the fort wayne clutch works really good. to bad they will not be offering it anymore found the receipt...
  7. kcobra302

    Flywheels and flexplates

    i bought a kit from fort wayne last summer. very nice clutch, huge improvement over any stock set. went with kevlar unit. when i get home tonight i will see if i can track down the part numbers for you.
  8. kcobra302

    15" wheels & 2" drop

    thanks for the info dano. i have been looking at tire sizes for a long time. i really wanted to go with a 25" tall tire but i just can't get it to work. i just hate to go out and buy a size, then have it not fit. i am thinking a 15 x 6 wheel with a 205 or 215. there are several...
  9. kcobra302

    15" wheels & 2" drop

    recommendations please i dropped my king 2" inches in the front and 1" in the rear. i am having a tough time getting a 15" wheel with a decent size tire to work in the front. i am currently running a 15x4 and would like to change it out to put a little more rubber on the ground. i tried a...
  10. kcobra302

    lets talk suspension

    i picked up mine from speedway motors and they came with poly bushings. they have both the tubular and stock stamped versions. i went with the tubular and they are nicely built.
  11. kcobra302

    lets talk suspension

    make sure you get the standard width mii uppers. many companies sell uppers that are 5/8" narrower. i found out the hard way. bought a set through ebay and could not return them. supposedly the seller did not know they were narrower than stock. i was lucky to be able to resell them on ebay.
  12. kcobra302

    Mustang II Member's rides

    these are a couple of years old. not much has changed.
  13. kcobra302

    master cylinder

    if things pan out through the winter i will be upgrading the front to the 11 inch rotors and going with a disk setup for the rear. any recommendations for a master cylinder replacement. rear disc kit: Mustang II
  14. kcobra302

    Anyone got this spoiler?

    love the car and the idea. the only thing that would go against it is the angle at which the spoiler would sit. the 69 & 70 cars has a flat area on the trunk lid and with no flat area on the II it might look a little awkward. why don't you see if you can get some dimensions and make a rough...
  15. kcobra302

    power to manual

    is this what i need to go from a power rack to a manual rack? i know there are numerous threads regarding the rag joint but i am curious if this solves that problem...
  16. kcobra302

    Ghia conversion to hardtop?

    there have been several sets of coupe windows on ebay over the paste few weeks. i have not been on since suday so not sure if they are still there.
  17. kcobra302

    dual exhaust help

    over in the forums section of the .net site they have a second classified section listed as parts-buy-sell . the ad is not in the main classifieds. guy is selling 2 of the double hump cross-members. a little more than i would pay but no where near as bad as the one listed earlier in the...
  18. kcobra302

    Heater core removal

    hose ends on the ac cars are on the engine bay side of the firewall. if you are doing the heater core on an ac car set aside 6 to 8 hours. if i remember the book i had gives you 6.5 and you will be hustling and must know exactly what you are doing to beat that time. i really like working on my...
  19. kcobra302

    SVT five spoke wheels?

    there is someone on here or on the .net site. its a coupe with 17" cobra style 5 spoke wheels.
  20. kcobra302

    solid motor mounts..........?

    there is a guy on the .net site selling rebuild urethane kits for the engine mounts. if you are going with the t-5 for a transmission you can run a urethane tranny mount from a 94-95 and still keep the same driveline geometry
Top Bottom
Back
Forums
Menu