Search results

  1. 9

    has anyone ever used a blue oval industries throttle body

    Yes it is called Power I forgot to add that in Sorry, I am looking for a 75mm throttle body sorry, I have a 76mm c&l mass and I would like to stay around that size. Also what do I have to do to delete the egr, will it throw any codes to the ecu, I know I have to get the delete plate but what...
  2. 9

    has anyone ever used a blue oval industries throttle body

    I found a blue oval industries new 75mm with egr plate for 160.00 Where can I look for an accufab. I am new to mustangs and I want to get mine running better , it is pretty weak now. I am used to my old mitsu. eclipse awd turbo, But I sold it do to constantly breaking trannies. Thanks Ricky..
  3. 9

    has anyone ever used a blue oval industries throttle body

    I found a 75mm Blue Oval Industries throttle body, I was wanting to know if anyone know someone or if they have one, let me know if it is worth buying. Or should I go with Edelbrock or BBK. Thanks..
  4. 9

    where do I fill a t-5 with fluid

    I am going to try the shifter method, I am a loner always stuck working alone so I need the easiest way, good thing t-5's are light and easy enough for one person to shove up in place. Thanks for the help, stangnet is the best..
  5. 9

    where do I fill a t-5 with fluid

    I have seen people fill a t-5 in the shifter opening and take out the upper fill bolt to see when it is full, is this a good idea or is it better to fill it in the side bolt hole.. The new b&m pro ripper shifter have a plug on the base you can take I guess to fill the tranny.
  6. 9

    what fluid to use in a t-5

    What shifter would everybody reccomend, I had a pro ripper but it felt to stiff for me I like a smooth easy shift.
  7. 9

    what fluid to use in a t-5

    I have a 90 with of course a t-5 I am putting in another t-5 and I need to know what fluid to put in it so I can pick some up tomorrow..
  8. 9

    Any one live near Wilmington Ohio

    I could use some hands on help getting my stang to run better. I have a 90 it has 3.73's e-cam moroso cold air, 24 lb injectors, 76 mm c&l mas bbk headers, explorer u\l, elec. fan, B&m pro ripper, I can get it to spin thru 1st, and about 10 ft. in 2nd and then the car falls off. I have tried...
  9. 9

    what gear is in this 2000 GT and 90 tps question

    Hey guys thanks for the help, I need to adjust my tps. My car just does not act like it should. It has an e-cam explorer u\L moroso cold air 24's 3.73's bbk headers 2.5 flows b&m pro ripper elec. fan 76 mm c&l mass, I can get it to spin thru first and about 5-10 feet in second, then the car...
  10. 9

    what gear is in this 2000 GT and 90 tps question

    2000 GT the axle code is le what gear is this.. also if anyone could tell me what wires to check the tps on a 90 lx 5.0l
  11. 9

    what gear is in this 2000 GT

    I have a buddy who has a 2000 gt it has LE for the axle code the car is a 5-speed with street tires it ran a 14.70 @ 97 mph.
  12. 9

    What is the proper way to set timing on a 90 lx.5.0

    I am new to mustang, how do I pull the codes, also the balancer looks fine.
  13. 9

    What is the proper way to set timing on a 90 lx.5.0

    I have a 90 lx 5.0 with an explorer u/l intake an E cam c&l 76mm mas 24lb injectors cold air intake 3.73's I set the timing on what was showing to be 12 degrees on the light, and the car just does not pull like I think it should also no knock at all. I set the timing this way, I pull out the...
  14. 9

    mass meter upgrade need help on cai question

    I have a 90 lx it has a moroso cold AIR kit on it, do I have to buy a special mass air meter for cold air or will any mass work. I am wanting to put 24 lb. injectors in it for now and upgrade later what is the best mass to buy. My mods are an explorer upper and lower e303 hedman headers offroad...
View older results
Top Bottom
Back
Forums
Menu