Search results

  1. Kabuki_notch

    Brakes ATS Upgrade & Rear disc Brake issue

    update, I checked every fitting twice, removed the M/C and bench bled it outside the car, manually bled the brakes and glad to say the brakes are holding no more pedal to the floor, I also noticed the 3-2 port adapters were leaking a little bit so it could have been a combination of it all.
  2. Kabuki_notch

    Brakes ATS Upgrade & Rear disc Brake issue

    Thanks again for responding, I got a lift so makes things a bit easier when pulling the wheels etc, I'll get the car up in the air tonight pull the 4 wheels and check every fitting/connection and test again, if I'm still having issues I'll pull the MC and bench bleed it, just slowly check the...
  3. Kabuki_notch

    Brakes ATS Upgrade & Rear disc Brake issue

    Thanks for the response Mike, I bled the M/C in the car, wondering if the pitch when bleeding left air in it. It could also very well be a vacuum leak I had the upper intake off for some cable management and maybe left something unhooked. I Just went outside and had the car running, I had one...
  4. Kabuki_notch

    Brakes ATS Upgrade & Rear disc Brake issue

    Hey guys, I couldn't find a solution to this issue searching (or I didn't look hard enough) I just recently swapped my car from Cobra front brakes and Rear drums to ATS Calipers, Taurus rear calipers, stainless braided hoses, new rear lines, 93 Cobra booster, 94/95 GT M/C all brand new parts...
  5. Kabuki_notch

    Post pics of how your foxbody currently sits

    I went with the 94/95 GT
  6. Kabuki_notch

    Cobra booster installed !@#$

    I just did mine a couple weeks ago, slightly elongated the top hole closest to the engine, I actually had to pull the valve cover to get the wiggle room I needed.
  7. Kabuki_notch

    Progress Thread Hoopty v2.0 - It All Snowballed

    perfection, would love a set of BC Forged wheels someday.
  8. Kabuki_notch

    Post pics of how your foxbody currently sits

    Sure am, everything went together pretty well little bit of a pain getting the old inserts out, was also a little nervous about them fitting behind my wheels
  9. Kabuki_notch

    Post pics of how your foxbody currently sits

    doing the ATS Brembo upgrade and rear disc conversion, the sticky has been a godsend.
  10. Kabuki_notch

    Progress Thread Hoopty v2.0 - It All Snowballed

    amazing wheel choice!
  11. Kabuki_notch

    Foxbody paint recommendations in reds and burgdany with pics

    my car was Maroon, but I repainted it Redfire code is G2
  12. Kabuki_notch

    JRichker -- Rest in Peace

    RIP, always willing to help people out no matter how many times the same questions would get asked. He will be missed.
  13. Kabuki_notch

    Let's See Those Wheels!!!

    XXR 521 18x8.5 & 18x10
  14. Kabuki_notch

    Post pics of how your foxbody currently sits

    Thanks! no it was included with Hagerty's Drivers club up to 100 miles
  15. Kabuki_notch

    Post pics of how your foxbody currently sits

    tfi module or ignition coil car just died at the light, either way replaced both I'm up and running but this sucked, luckily I was only 7 miles from home.
  16. Kabuki_notch

    Post pics of how your foxbody currently sits

    351 with a 4spd
  17. Kabuki_notch

    Post pics of how your foxbody currently sits

    picked up a 66 coupe from a friend little side by side shot with the fox
  18. Kabuki_notch

    New to me 66 Coupe

    Hey everyone, I post mainly over in the 79-93 forums, but I recently picked up this 66 Coupe from a friend who needed to offload it for personal reasons, I figured I would introduce myself and show some pictures, it's a 66 Coupe with 351 4spd toploader, newish interior and it came with a trunk...
  19. Kabuki_notch

    Post pics of how your foxbody currently sits

    at a show over the weekend next to my buddies 67 fastback
  20. Kabuki_notch

    Post pics of how your foxbody currently sits

    all cleaned up! been tossing around the idea of changing up my wheels
Top Bottom
Back
Forums
Menu