Search results

  1. 9

    Cobra Brakes (Sn95) Conversion Brake Lines

    What are you guys using for brake lines. I am looking to see if I need adapters or if the Later Cobra stuff will fit. I will be using stainless braided lines as this car will see road course time. Thanks J
  2. 9

    plugging smog holes

    I've heard that you can actually go right up to your local ford parts counter and ask for it as a "Smog Plug" for the cylinder heads. I'm doing a cylinder head article for Muscle Mustangs& Fast Fords and after asking around a little that's what I found. I haven't ordered them yet, nor do I...
  3. 9

    15x8s on Cobra Rear Brakes

    Thanks, I'll remember to check the centerlines.
  4. 9

    cometic gaskets worth the $

    :stupid: If do not have plans of boosting or spray or any other combination that would generate high cylinder pressures. It's not worth it. However I have used them on every motor I've done with no regrets, wether or not I "needed" them was a different story.
  5. 9

    15x8s on Cobra Rear Brakes

    don't know what i was thinking, i meant to specify 94 and newer
  6. 9

    15x8s on Cobra Rear Brakes

    I've searched and came up with little to no results. Will 15x8s fit with cobra rear brakes? Thanks in advance.
  7. 9

    BBK 1-3/4 LT Fit

    I didn't have that problem, but they did hit the pass side of the crossmember. It required several attempts with a hammer to "persuade" it to fit.
  8. 9

    aluminum AFCO rad install`

    Was this thier standard 27 1/2 x 19 Ford Radiator? Thanks J
  9. 9

    Vortech or Paxton blower minus smog pump

    Thanks didn't know it existed.
  10. 9

    Vortech or Paxton blower minus smog pump

    I didn't think it would, I just figured i'd get an idler pulley of some sort and fab a bracket to hold it in place, or room permiting move the alt up there.
  11. 9

    Vortech or Paxton blower minus smog pump

    Is there a belt routing issue when you have eliminated the smog pump with either of these blower kits? Thanks J
  12. 9

    The company that replaced Pro-M is shipping Mass Air Meters

    They are now called MassAirSystems. Thier number is 517-327-3900. At first they were just doing recals, but the patents where bought and they have been shipping to a lot of the popular vendors. Sorry if this is a double post, did not see anything in the search. These are the same meters that...
  13. 9

    Have any tips or tricks to installing BBK Long Tubes?

    I finally got a chance to install the headers last weekend, make an attempt rather. I removed the steering shaft and the driverside fell in. The passenger side on the other hand fell in, but I had to dimple in a 3-4 inch area just to gain 1/4 inch clearance between the header and the...
  14. 9

    Have any tips or tricks to installing BBK Long Tubes?

    thanks guys, i'll let you know how it goes. i'm going to try for the weekend after memorial day, but with my schedule these days it's hard to say. even worse to see the parts in the garage with no time to install. thanks again
  15. 9

    Have any tips or tricks to installing BBK Long Tubes?

    I am looking for any time saving tips for installing bbk long tube headers. I have access to a lift, but it is limited by when and only on Saturdays. I may end up doing this in the garage at home. I'm just curious if there is any procedural things to know if this it the case.
  16. 9

    Considering 4 eye conversion

    Thanks guys. I don't know if this will become a reality or not. I'd like to do it, but there are things the car needs more right now. I've found that everything but the fender extensions are available. I do know about the trim(side moulding), wouldn't hurt to do that as it is starting to...
  17. 9

    T5O-D Fluid change, use Mercon Auto Fluid? or 80W gear oil?

    i have a fluid pump/suction gun it worked pretty good, kinda messy. I used to be a technician so i had one from that. something else i bought a basin pan (designed to go under clothes washer) from lowes. it's about 3 ft square. it's good for catching small spills and runover when doing stuff...
  18. 9

    Considering 4 eye conversion

    Here is what I know of bumpercover, all front lights, all trim(beltline), hood. I have found all of these parts at 50resto or year one. i'm wondering about stuff like dealer only nuts/bolts(headligt adjusters or hood latch) and stuff like that. I need a bumper cover anyway the ligts aren't too...
  19. 9

    Considering 4 eye conversion

    Is an aero nose to 4 eye conversion pretty much remove old install new? What about headlight mounting. I searched with no results. Thanks
  20. 9

    Rearseat delete

    Here are my plans (basically) I am going to remove both the seat back and bottom. Make a plywood panel that lies flat and comes from where the seat back used to meet the rear carpet (hatch lx btw) up to where the front of the seat bottom was. Then make a piece that comes up from the floor to...
Top Bottom
Back
Forums
Menu