Search results

  1. Paul Perreca

    AT THE DYNO!

    JD's is takin forever lol nah itold them they could have it as long as they needed it, so im sure its off on the back burner now - but they looked really busy, there was 2 other fox bodys there n a ferrari lol plus whateve was IN the shop !
  2. Paul Perreca

    AT THE DYNO!

    well i figured this would kind of be tech - because so many ppl are weary about dyno tuning, it would be tech if i posted my exact combo, and my dyno sheets cuz i'm going to have questions about how to read the graph correctly w/ my power band and things - daggar bastard lol
  3. Paul Perreca

    Step By Step Orange Peel Eliminator

    yea - good additions - def use wet sanding, that da will burn through an edge n you will be very dissapointed - 3M is the compound we use, it is the best we have found so far, but there is off brand names that are quite good as well, but I've only used one other kind, and it didnt' quite...
  4. Paul Perreca

    AT THE DYNO!

    My car is currently at JD's HIGH PERFORMANCE - Joe said he would send me my baseline results in my email n my final results too - if he does, i'll save them as a picture n post them - IF i dont break 300 hp, i'll just post them in here, but if i do, i'll make a new thread cuz i want to lol -...
  5. Paul Perreca

    Step By Step Orange Peel Eliminator

    somethin must be wrong w/ ur computer, use a friends computer, or go to the library - im at widener library n they come right up -
  6. Paul Perreca

    HP?? 1/4 Mile???

    w/ good driving mid - high 12's - and a little over 300 rwhp if tuned properly
  7. Paul Perreca

    Weird Idle Issues

    should i run it w/ the spout connector disconnected?
  8. Paul Perreca

    Weird Idle Issues

    yea i checked that over a million times, i just thought maybe someone had some idea if it was the "jumping timing" i quoted from some guy that was causing my ****ty ****ty - there is nothing in that entire checklist that i haven't tried i dont think
  9. Paul Perreca

    WHAT THE HECK controls the idle in these things?

    1000? better than 350 lol
  10. Paul Perreca

    Write-up: How to equip an 87-93 stang with HID's the RIGHT way. LOTS of pics.

    cool project, but id never go to that extent --
  11. Paul Perreca

    Weird Idle Issues

    I start my car n it idles ok till it warms up than its really ****ty idle - ok so i let it warm up and i adjust the idle screw, it idles great, i tighten that up and drive it, it's fine - as soon as i turn it off, n start it back up, the idle resets itself to ****ty - its weird - so i adjusted...
  12. Paul Perreca

    Audio experts

    my friends just installed a dvd headunit into his car, and the subwoofers only come on when the radio is playin, not the cd player, but the amp stays on.... help
  13. Paul Perreca

    FS #6600 ...engines out! (pics)

    batterystang, lets take a look at your engine bay, that little pic isn't big enough lol i wanna see that clean beast- it looks great in the av
  14. Paul Perreca

    cheapest brand new t-5

    i think he wants a bran new one
  15. Paul Perreca

    should i buy the e cam?

    agree with dman, you have to pull more than half the motor apart to do the cam anyway, instead of just pulling it apart installing the cam, and putting it back together, might as well put it back together w/ aftermarket heads n intake while your already torn apart -
  16. Paul Perreca

    Update -

    the tfi module was replaced when the engine swap was done, the original got broken comin out i think, so i got a new one - it can't be that !! DAMN IT lol On monday, i'm dropping it off with a specialist w/ a good reputation, i'll see what he comes up with - i'm sure he'll pull the codes, n...
  17. Paul Perreca

    Update -

    My car is running really strong, the problem is still present however, and it is the car cutting out when i try to race it, (not really race, but just gun it) - so i bought a 190lph fuel pump, and i will be putting that in to match my combo w/ the 24#ers - i wouldn't be surprised if that doesn't...
  18. Paul Perreca

    dyno results chart-any new ones or updates to this one??

    nobody had edelbrock performer RPM heads? the 6037 isn't the performer rpm heads, i think the PRPM heads are 60299 -
  19. Paul Perreca

    Code Pulling -

    so just go w/ my test light?
  20. Paul Perreca

    Slp vs. Spintech

    Spintech Pro Streets, W/ tail pipes, and offroad H, and Mac shorties, and a H/C/I package - seriously sounds like the meanest car around town - mean as hell - great sound - the 3000 RPM cruise sounds like a modular
Top Bottom
Back
Forums
Menu