Search results

  1. DemonGT

    Megasquirt Digital Dash

    So for the Pimp i would jumper with the resistor like shown with the blue wire to pin 50 and 26 instead of 19/23, then set up in TS as shown?
  2. DemonGT

    Megasquirt Digital Dash

    Would these instructions apply to a Pimpxs?
  3. DemonGT

    Mcloud bellhousing, few ??

    digging this up from the grave but did any one that used the Mcloud bell remember if they had to do any adjusting on the pivot ball? my clutch has always engaged super high even after messing with my firewall adjuster and i installed this clutch and bell housing so long ago i cant remember how...
  4. DemonGT

    Fox Cruise cable with tall covers

    When i installed my motor i used the FMS tall covers. They interfered with the bracket that holds the throttle and cruise cable so i cut the end off that holds the cruise cable. Im wanting to get the cruise functional and was wondering what covers work with 1.6 rockers and do not interfere with...
  5. DemonGT

    Foxbody Mustang Cruise Control information, location, wiring diagrams

    Does the factory cruise require the factory ECU?
  6. DemonGT

    Two tone GT Pics

    Lowered since pic
  7. DemonGT

    Megasquirt Digital Dash

    Was thinking about this more and realized my Pimpxs does not have a canbus connection...
  8. DemonGT

    On3 or A Trim?

    I feel like this is going to snow ball into a turbo 331 build lmao... off subject but do you tune your own car? just installed a pimpxs this fall. Got it running but being in WI i have not had a chance to drive it yet.
  9. DemonGT

    spark plug wires, what are we using these days?

    I used to use the Ford wires and switch to the Taylor spiro pros and have had no issues.
  10. DemonGT

    On3 or A Trim?

    How about just building a bigger cube stroker and just staying N/A? :shrug:
  11. DemonGT

    Electrical Fog lights come on with headlights

    When using my headlights and fog lights it would over load and shut off my headlights and fogs. Common issue, someone on here or corral had a how to wrote up with a parts list to get from your hardware store and how to rewire the fogs to not over load the circuit. Someone may have it saved and...
  12. DemonGT

    Anybody try these center vent pods ?

    Do you have a pic of the can of primer you used?
  13. DemonGT

    Megasquirt Digital Dash

    This is great news! Excited to see how this works. So with V3 would your fuel level/high beam/turn signal wiring go to the back of the dash? Is there a tentative release date on V3?
  14. DemonGT

    Megasquirt Digital Dash

    Is there a Gen2 DD EFI being working on?
  15. DemonGT

    MAF vs SD

    Thank you or the reply I thought i had read that in SD auto tune will only adjust fuel ve and nothing on the ignition tables but running a MAF would allow auto tune to adjust ignition tables so once tuned correctly you get the benefit of both fuel and ignition tables auto tuned?
  16. DemonGT

    MAF vs SD

    My question was in regards to running Megasquirt in SD mode vs running a MAF with it.
  17. DemonGT

    MAF vs SD

    Looking for more info on using a MAF. I still have mine and have not really had much luck with info since it seems no one uses a MAF? What are the pro's and con's of running the maf? Where to you get the calibration curves and info for setting up?
  18. DemonGT

    MS First start

    When looking at a table when driving or revving the cells climb from left to right. I was wondering what would cause a engine to be at a higher rpm, but a low kpa or %baro or a high kpa/baro at lower rpm? If everything is running correct it does not seem like you would ever get into those cells?
  19. DemonGT

    MS First start

    For idle, cruise and WOT what is considered "rich" and "lean" for those areas on a N/A street car?
  20. DemonGT

    MS First start

    incorporate afr selected
Top Bottom
Back
Forums
Menu