Search results

  1. S

    need help with smog,and maf

    Im no genious but that sure sounds like the timing is way off? Could the distributor be a tooth off?
  2. S

    Vacuum leak I think?

    Removed a/c and smoggy. Did intake swap with the "starter fluid test". I am thinking I have a vacuum leak in one of the lines that connected to either the a/c or smog hardware. What needs to be plugged off after a/c removal? What do you to to plug off the red white and green vacuum hoses that...
  3. S

    Pro M 80mm..

    The pro m 80mm mass air sensor has the cone filter attached to it right? So my BBK CAI federwell kit would be useless? Does the 80mm unit work with andersons power pipe?
  4. S

    MSD or the Performance Distributers kit??

    What are you using and what gets the best bang for the buck?
  5. S

    wtf..summit gauge and fuel rail adapter?

    same here....could use the part number of each one....
  6. S

    Gt-40 intake with 3/8 spacer

    will it fit under a stock hood?
  7. S

    Trick flow twisted wedge component questions..

    Got my TFTW heads. Just wondering a few things. Which Head gaskets did you use the fel-pro 1011-2 or did you use trick flows head kit? Does anyone have a part number for the head bolts? I know that 6.75 pushrods are needer where did you buy the from and did you get a deal? And last but not...
  8. S

    Feb discount code for trick flows at summit?

    Sumcsum741
  9. S

    Feb discount code for trick flows at summit?

    never mind I found it
  10. S

    Feb discount code for trick flows at summit?

    could someone give me the Trick Flow code for summit?,....I forgot it.
  11. S

    FTI and trick flow, not a bad way to spend 2000$

    I figured I might as well just change the rollers as long as im in there, I have to change the pushrods anyway so I figured it was good insurance. My set up is: 302,gt40 intakes ported,65mm TB,80mm pro M,walbro 255 fp,30lb injectors,FPR+gauge,1.6 scorpions on updated TFTW heads, FTI cam, no...
  12. S

    FTI and trick flow, not a bad way to spend 2000$

    Well, I finally got the delivery, Trick Flow Twisted Wedge Heads from Summit FTI cam from Ed Curtis with Billet timing chain new lifters and gaskets 1.6 Scorpion roller rockers New spring and seals for the heads to match the cam. Install begins saturday morning, hoping for deep 12's...
  13. S

    Anyone with an FTI cam....

    When you talked to Ed did he try an up sell you into like a new intake or TB or anything? Do you think that his Ford hydraulic cam kit(cam,lifters,chain,gaskets) is worth 575$?
  14. S

    Is MSD worth it?? What kinda Power gains?

    What about Performance Distributors stuff? Alot better throttle response, no breaking up above 5000 and plug and play to boot.
  15. S

    March adjustable alternator bracket.

    I took the a/c off my 92 and I really dont like that tensioner relocate kit. Does this bracket work without the tensioner? I thought I read something that it likes to throw belts? Where can I get one cheap, considering March stuff is usually way overpriced.
  16. S

    Ed Curtis @ FTI

    I sent him all my specs via e-mail a couple days ago. Im just curious on how long it usually takes for a response?
  17. S

    1.5 inch lowering springs for a fox

    Sharp car but man that thing is on stilts!!!!! I used BBK progressive rates. It definatly dropped it over an inch even though its advertised differently. It rides great and I had no problems fitting 26 inch tires under it.
  18. S

    GT40 intake and spacer clearance questions

    I dont know what to believe. There are some conflicting thoughts on whether or not removing the hood blanket will damage the hood's paint from the heat. Then again if you are changing the hood in the future I guess this doesnt really matter.
  19. S

    GT40 intake and spacer clearance questions

    1 inch spacer will not clear, 1/2 inch will but you might have to take off the hood pad
  20. S

    1/4 mile worries...

    Gt-40 intake Trick flow heads 1.6 roller rockers thinking about the N-41 anderson cam 65mm TB 73mm mass air 30 lb injectors AFPR and 255 lb pump. pulleys, um just the basics.
Top Bottom
Back
Forums
Menu