Search results

  1. S

    500rwhp how-to write-up w/ sq-trim

    ok got the car back from jpc performance those guys do good work the car put down 528rwhp/480 rwtq @6200rpms and thats at 16psi from the little sq-trim so not to bad and i finnally hit my mark of 500 to the rear wheel i will put up some pictures of the dyno sheet and the engine bay...
  2. S

    what kind hp should i expect

    i am sure justin will let me know if i am going to need to go with an 8rib atleast the blower and crankpulley are 8-rib some people running as small as 3.12 6rib with out slippage and thats with a stock crank pulley
  3. S

    what kind hp should i expect

    ok guys the car is back in the hands of jpc and it should be going to the tuner thrusday .. the car makes 446 whp as its stands i added 60lb injectors paxton fmic mini-race bypass 10% od crankpulley vortech pulley 2.95 down from the stock 3.6 what kind of power should i expect...
  4. S

    500rwhp how-to write-up w/ sq-trim

    ok made a very small video just got the oil changed also now time to fine a good tuner so i can get on the gas... http://s94.photobucket.com/albums/l105/fotoreaver/?action=view&current=MyMovie.flv
  5. S

    500rwhp how-to write-up w/ sq-trim

    i am not to happy with the 3 x 90 deg bens i have in the pipping but it will have to do for now i did not want to open that hole were the intake is going rigth now so i will wait till i install the pro-m meter and get a tune to see how the boost looks i may just redo the tb to intercooler...
  6. S

    500rwhp how-to write-up w/ sq-trim

    ok sorry got off work late anyway here are a few pictures i am still using the stock bpv atm but i also installed the mini-race no vacuum line to it so it stays closed the car is going to need a tune i gave it some gas just to see how it sounds i am getting a fluttering sound comming from...
  7. S

    500rwhp how-to write-up w/ sq-trim

    ok looks like the 108" belt fits the car... got it from ups today i ran the pipping best i could i will take a few pictures after work and post them let me know what you guys think.. i also need to get a large hose for the vortech mini-racer bpv also waiting on the pro-m maf meter but...
  8. S

    Supercharger vs Turbo

    yea the mmr 900 shortblock is holding up great i just dropped down from a 3.60 to a 2.95 pulley and a 10% overdrive crank so hope to see 16-17psi at 6000rpm this set-up will over spin the blower alittle but the block is good for it.....
  9. S

    pipping route for paxton fmic help

    ok i got the intercooler mounted i also installed the 10% od pulley and 2.95 vortech pulley the pipping that i got with the paxton is not enuff to connect up to the intercooler and the intake if anyone has done this install and have pictures that would be great i will take pictures...
  10. S

    broken crankpulley need help

    hehe see this killed my whole day i am already down the brew as we speak :D
  11. S

    broken crankpulley need help

    fcking a dude i got the fcker off at about 5pm hehe i got it off by drilling two holes into the pulley or what remains of the pulley and it cracked bad side is i scratched the crank up so i clean up all around the crank and installed the 10% od pulley it was a b*tch to get on started...
  12. S

    broken crankpulley need help

    ok looks like its war i got 8hrs before sunset wish me luck:mad:
  13. S

    broken crankpulley need help

    yea now that i think about it your rigth once the pulley broke that dam washer dropped off when i removed the broken pulley.. i did not even thing about that... so any advice now
  14. S

    broken crankpulley need help

    yea man this is crazy i cant get this fcker off... yea i am hot rigth about now with this i have tryed using a torch on it,wd40 i cant keep tring to pry on it i dont want to warp or damage the crank.....only other thing i can think of is to remove the timing cover but thats going to be a...
  15. S

    broken crankpulley need help

    i used the crankpulley puller it uses 3 screws that screw into the holes of the pulley and a center rod that presses agains the crank that u turn
  16. S

    broken crankpulley need help

    i see i will see if i can find some maybe advance auto,napa or pepboys best we have over here in maryland i need to get this car back together or close to it before sat. i dont get another day off till next thursday.. thxs for the advice
  17. S

    500rwhp how-to write-up w/ sq-trim

    also i got oil in my intake the air filter is full of oil and dirt...i will install some kind of oil bypass its more then likely coming from one of the hoses that connects to the intake and not the charger.. my other girl friend the g35
  18. S

    500rwhp how-to write-up w/ sq-trim

    ok guys i know this is a long azz post but i am still working on it was going to pay jpc to install and tune everything but looks like they are very very busy. call them in july and its sept and they still can not give me a date to drop off the car..so i got up off the couch and decided to...
  19. S

    broken crankpulley need help

    hmm i will need to by a torch then.. so i would have to melt the puller bolts onto the remains of the pulley and then try pulling it .... is that what your talking about i will take a picture to show you what happen ..
  20. S

    broken crankpulley need help

    ok i was removing the stock crank pulley so i could install my 10% od pulley i was using the crank puller to remove the old one sprayed a little wd40 on there started to remove the pulley its a little tight as i turn the puller i hear a loud popping sound the fcking crank pulley broke off...
Top Bottom
Back
Forums
Menu