Search results

  1. 873Stang

    school me on superchargers

    that was awsome i just got schooled lol!!!! thanks very helpful
  2. 873Stang

    3:89 or 3:73

    daily driver and strip on sat
  3. 873Stang

    3:89 or 3:73

    and im looking at getting a x303 cam
  4. 873Stang

    3:89 or 3:73

    what is a really good gear between the two? 389 or 373, im prob doing diff work in 2 to 3 weeks,
  5. 873Stang

    school me on superchargers

    whats the diff of them i see ppl talking about diff trim , or whipple superchargers???
  6. 873Stang

    high rpm's

    how can i get high rpms, if i built my motor what would i do to achive a high rpm motor say revs to 7k or 8k if possiable
  7. 873Stang

    stock rocker arms

    but when you bolt them down theres no filler gauge to use, and aren't both valves spose to be close when you tighten them?
  8. 873Stang

    stock rocker arms

    hwo would i adj my stock rocker arms? i took the heads off and im putting it back together. thank you
  9. 873Stang

    oil leak/block

    whats up guys? hey i recently did heads on my whip(ride) its an 87 5.0 5spd and on the passenger side on the block by the trans bell housing theres a hole about the size of a penciles eraser, anyways theres oil leaking from it, but just a little like bearly just carious as to what could cause...
  10. 873Stang

    Header Question

    bbk's really that good??? what about jba lt's
  11. 873Stang

    white smoke from pipes

    yea my coolant had brown foam crap took the top end off and think for sure head gasket is bad lol thx guys oh and the bottom bolts on the cyl head the ones closest to the firewall when you take them off is coolant spose to come out???
  12. 873Stang

    white smoke from pipes

    coolant wasn't able to check, i was stupid and panic and took the cap off when it was hot so the coolant came out. oil looks normal but feels milky or thick. plugs look ok
  13. 873Stang

    white smoke from pipes

    if you get alot of white smoke from your pipes that would be the heads right?
  14. 873Stang

    5.4

    is the 5.4 from a pick up able to fit in the mustangs ????
  15. 873Stang

    Need tips on turn signal problem

    hey turn the key to the run position, then use a test lite to see if all your fuses work. if you come across one that doesn't of course check the fuse then the connection it self, if you get no power and you should be, chances are its your ignition switch connector. i had the same prob and it...
  16. 873Stang

    im sprung.......on springs

    so what is a better spring h&r or eibach??? those are what im looking at using along with tokico 5way adj struts/shocks thanks
  17. 873Stang

    question for the pros

    car running off the battery prob cause everything to reset. that would do with setting up the tps, google search it "tps reset mustang" and also setting the iac (you should be able to disconnect it, and it will run rough but as long as it dont die, if it still idles high back the screw out till...
  18. 873Stang

    cobra brakes

    sweeet!!!!!! thx
  19. 873Stang

    cobra brakes

    ok you know how the cobra rotors are bigger, what is made bigger to use those rotors the clipers brakets or the caliper ? thinking of getting stock spindles and axles from an sn95 but using cobra rotors, so i basically need to know if the stock sn95 cliper brackets or clipers would work with...
  20. 873Stang

    Turn signals not working

    lol same prob last week replace all the obvious, ended up being the ignition switch connector
Top Bottom
Back
Forums
Menu