Search results

  1. 90_Red_LX

    Rear Springs Not Staying In.

    Didn't realize shocks needed to be hooked up. I'm an idiot
  2. 90_Red_LX

    Rear Springs Not Staying In.

    I bought a set of MM adjustable rear control arms and the rear end keeps dropping too low to keep the springs in. The springs when I jack the adjusters up doesnt let the spring sit nice and flush on the bottom. The pigtail on the bottom of the spring is jacked up a little. All control arms...
  3. 90_Red_LX

    Need Tire Size Recommendations

    What I was thinking. Didn't think any 300 series width tire had a prayer without a tub. Yes it will be lowered. Fenders are already rolled. Quad shocks are off. Yes I'd like to turn quicker than that. Offsets 6.75 ballpark, 6.83 truly I believe. Tailpipes? I had some when I was running 255...
  4. 90_Red_LX

    Need Tire Size Recommendations

    How much is a little massaging?
  5. 90_Red_LX

    Need Tire Size Recommendations

    What tire sizes would you guys recommend for a 17x10 rear and 17x9 front wheel size? They're 10th anniversary wheels. Thanks.
  6. 90_Red_LX

    Ball joints for 5 lug swap and 03 cobra steering rack

    Alright thanks guys. x2's and bumpsteer kit. Already was planning on a bumpsteer kit.
  7. 90_Red_LX

    Ball joints for 5 lug swap and 03 cobra steering rack

    Alright, I understand 93 taurus tie rod ends are the way to go for an 03 cobra steering rack swap. The 03 rack is mounted in the car now. Stock a arms, 94/95 spindles, tokico blue struts, mm caster/camber plates, and eibach sportlines are my front end setup. What ball joints should I use...
  8. 90_Red_LX

    Post pics of how your foxbody currently sits

    Took this pic a month or so ago, but sits in almost the exact state other than a few more things hooked up and the wheels are no longer propped.
  9. 90_Red_LX

    Need a little help.

    If your going to drive the car a lot, I would consider keeping the egr. Sure it's not the prettiest system in the world, but it shuts off at WOT, and helps with fuel economy during cruise.
  10. 90_Red_LX

    According to this dyno sheet when is the best time to shift???

    The way I feel about it, the average person won't be consistent enough to benefit from being super accurate on shifting anyway. I always just played it by ear, and by the stock tach even though it's accuracy is, well, not accurate.
  11. 90_Red_LX

    According to this dyno sheet when is the best time to shift???

    To me it always depended on what gear I was changing to. I almost always ran 1st near 6g even with stock h/c, then started dropping down with each gear change.
  12. 90_Red_LX

    fox length axles or sn95? And what else for 10in rim?

    I understand. Yea the standard gt/v6 brakes is what I was aiming towards. Was actually going to call nrc here in the next few days, and get brackets, axles, and cables. May just do their whole rear package and save the headache of hunting stuff down. So it appears fox axles are the...
  13. 90_Red_LX

    fox length axles or sn95? And what else for 10in rim?

    Also rear brakes sn95 or newer rear discs. Front brakes are off an 01 bullitt ala 99/01 cobras
  14. 90_Red_LX

    fox length axles or sn95? And what else for 10in rim?

    Backspacing is 6.83in iirc. So fox length axles abd possible spacers?
  15. 90_Red_LX

    fox length axles or sn95? And what else for 10in rim?

    Ahhh good deal then. Going fox length had me worried but I was afraid of going too far the other way and looking like a truck with mud tires hanging out in the back . If 285's will go out back without issue, would bigger go without much massaging? The dropping of quad shocks isn't a problem...
  16. 90_Red_LX

    fox length axles or sn95? And what else for 10in rim?

    Yea, they looked real tight to the inner fenderwell just by holding them near the 4 lug mosers in there now. Would the sn95 axle make the tire protrude out from the fenderwell, or would the extra backspacing help keep it tucked? As far as tires probably around like a 285. Not trying to go...
  17. 90_Red_LX

    fox length axles or sn95? And what else for 10in rim?

    I have a set of 17x10 10th anniversary wheels that I need to get mounted on the car. The time has come to round up the necessary parts. The front end I have under control, the rear wheel wells have been rolled, and if necessary take the inner wells on a date with the ol bfh. However, which...
  18. 90_Red_LX

    My Fox build

    Haven't researched the tire sized I can run. Hoping for a 275 in rear and 245 front. That and do I want to spend the extra money lol.
  19. 90_Red_LX

    Clip for temp control cable?

    Unfortunately I was hoping I could buy one lol. Feared the worst tho.
  20. 90_Red_LX

    My Fox build

    Yea it looks a lot different without the motor and trans. Trying to hopefully get the motor back in shortly. Even with stock springs it didn't ride awfully high, unlike most newer stock spring stangs. Still debating on whether or not to go coil over or not tho.
Top Bottom
Back
Forums
Menu