Search results

  1. B

    Problem at the track...

    I can solve your problem right now. Keep your foot in it and shift as fast as you can. Just dont let your foot be faster than your hand. As long as you have a strong drivetrain and some nuts you wont have a problem, and plus you can knock a tenth of your time if your fast enough.:nice:
  2. B

    Stroker Question

    Im in a perdicament.:bang: Ive been looking into doing a stroker kit for my mustang. Im not sure whichsetup to go with, either a 331 or a 347. Im looking to obviously get more power and some people have been telling me that i can get more out of a 331 rather a 347, and visa-versa. Right now i...
  3. B

    Engine Running Poorly

    Vacumme (sp) leak also could be the culprit
  4. B

    What Is This Box?

    When doing anything with airbags, I always will disconect the battery and wait ten minutes before touching anything. The voltage in the capacitors could be enough to set it off. Just a heads up when you got to replace it.
  5. B

    Cruise Control Deactivation Switch

    thats what i figured, just double checking. thanks!
  6. B

    Need a little electrical help!

    Already checked all the bulbs and the wires in the taillight. That is what I checked first. Im thinking now it might be the cruise control deactivation switch. Any one know where it is on the car?
  7. B

    Cruise Control Deactivation Switch

    Trying to find the location of the cruise control deactivation switch on a 97 Cobra. Any help would be appreciated! Thanks!
  8. B

    Need a little electrical help!

    I recently purchased my 97 Cobra, got it home, and realized I had no turn signals or brake lights. I found that the fuse was blown and put a new one in. Everytime I have the turnsignals on and the brake pedal depressed, it will blow the same fuse. It is an intermitant problem. It seems like the...
  9. B

    Wheel bearing help please

    you might want to check out calipers out, sometimes when you corner the caliper the way it is set can push the pad closer to the rotor and air going between the pad and rotor in that tight space can sometimes cause a squeel like a wheel bearing, just a thought for you to check out.
  10. B

    I Need Help With Cylinder Heads!!!!

    The combustion chamber in my heads are 64cc's would it be worth my while to send them out to a machine shop and have them decked just to up my compression ratio? i cause im sure my ratio is kinda low with that big of a combustion chamber size. any ideas, let me know, or if anybody knows where i...
  11. B

    I Need Help With Cylinder Heads!!!!

    its a 306 with the roush heads and stage 2 cam 1.6 roller rockers trick flow track heat intake 70mm throttle body and egr plate cold air intake close ratio trans 3.73's factory bottom end just all brand new.
  12. B

    I Need Help With Cylinder Heads!!!!

    I am in a bind, right now i have a 306 in an 89 lx notchback. i have the roush 200 heads on my motor with trick flow stage 2 cam and other bolt ons. i have been seeing friends of mine with less work going just as fast. i think its my heads. they might be a bit of overkill. i was looking for...
View older results
Top Bottom
Back
Forums
Menu