Search results

  1. triggz

    2004 GT nitrous

    Since your car will not have the schrader valve, your options are: Buy a set of 99-01 fuel rails (passenger side only even) with the valve on it. Buy the NX "fuel block" which drills into your fuel rail and creates the port you will need. I *highly* recommend NX over NOS. NOS did...
  2. triggz

    Piece of sh_t mustangs.

    If you read my first post, you would see that 'pay to play' is the entire point of this thread. Just moreso with Mustangs. Stuff was blowing up before it even saw any real 'abuse'. Anyway, even with all the stuff going wrong.. I cant think of another car I'd rather spend my money on. You...
  3. triggz

    Piece of sh_t mustangs.

    Oh yeah.. I completely forgot about the other stuff. Both 00 GT's cracked the intakes The headlights are ALL hazed over and look like complete sh_t. The third brake lights ALL look like they've been beaten with 40grit sandpaper. The pressure washer literally *blew* the paint right...
  4. triggz

    Piece of sh_t mustangs.

    I just would like to take some time to remind everyone, you gotta pay to play! Especially, apparently, with mustangs. 00 GT blows totally stock engine at 53k sitting at stop sign, known factory defect. Warrantied shortblock from Ford comes with a leaking pan. 00 GT auto transmission...
  5. triggz

    My friend has this plate on his 240SX

    :lol: best plate ever
  6. triggz

    13.0 with gears and exhaust?

    Alright here's the slip from Sunday 11/12/06 at Steele, AL. Elevation is ~550 and DA was about 200ft total. Jackie Chan, this time is almost identical to yours :eek: r/t: .663, 60': 1.732, 1/8: [email protected], 1/4: [email protected] Which is interesting to compare to my similar nitrous pass...
  7. triggz

    13.0 with gears and exhaust?

    My buddy has a 00 GT with a BBK CAI, 4.30s, custom xpipe with flowmaster 40s and a set of 275 BFG drags. Came back from the track today and showed me a 13.07 1/4 mile with a 1.7 60'. Oh and H&R SS springs..which aint helpin. Anyone else running times like that with those mods? The weather was...
  8. triggz

    Removing steering wheel

    You really do need to get the dime out soon, joking aside. Its possible for it to jump the contacts for the airbag and deploy just like it did for the horn.
  9. triggz

    Other possibilities for IAC symptoms?

    My friends 2000 GT tries to die almost every time you clutch-in coming to a stopsign.. especially if you downshift into 2nd, then clutch and brake it will bog to ~400 and then just die. We replaced the IAC with one off an 01 and it helped it a little, but it still dies sometimes. On a...
  10. triggz

    questions about Patriot Stage III 4.6L heads

    Patriot Performance is about 5 miles from my house, here in a little town of 5,000 people in Alabama.. They started out with a good thing making a quality product, but when their demand went through the roof, quality fell through the floor.
  11. triggz

    nitrous nossle isnt real tight...

    the tube may have too much curve in it to allow the nozzle nut to sit flat against it, maybe hammer it flat some? just dont try to spray without it being totally secured. 1000psi running through that line will make it swing around like a firehose out of control.
  12. triggz

    What could break free and be grinding in the diff?

    I have 40,000 miles on the gears and no problems. Maybe the main cap bolts have backed out and caused slack somehow? :shrug:
  13. triggz

    What could break free and be grinding in the diff?

    Took it apart today and found some chunks floating around and there are several damaged teeth in at least one spider gear. Its kind of hard to tell without cleaning all the fluid off, but I think the damage is limited to the spider gears, possibly the side gears. The ring and pinion dont appear...
  14. triggz

    What could break free and be grinding in the diff?

    Last night when I took my car out all of a sudden this loud deep wirring noise started. It sounds like when you run over a coke can with a bicycle tire and it rubs against the tire. I put the rear on jack stands today and its coming from the differential, if you place your hand on the dif cover...
  15. triggz

    Really, really bad sounding noise just now..help!

    I just drove my car up the street about a block, when I let off the throttle to slow for the stop sign all of a sudden this incredibly loud deep wirring noise started coming out of the rear/passenger side wheel area. It sounds almost exactly like when you run over a coke-can with a bicycle tire...
  16. triggz

    Diablo Tune 03 Auto Wont Shift Before 6100 RPM

    You need to datalog to be sure where its actually shifting. Setting the shift point at 5800 means the computer calls for the shift function at that RPM, it doesnt necessarily mean it will happen then. Gears and extra horsepower change how fast the RPMs are climbing, so it might rev higher than...
  17. triggz

    HELP!!! WRECKED STANG!!!

    That panel doesnt come off. Its welded onto the car.. youre gonna have to have a body shop hammer it out and fix it :(
  18. triggz

    2000 Cobra to 2003 Cobra

    You have a 99 or 01 Cobra (if your wing is the non-peg style and your bumper says mustang, its a 99. if your wing is the peg style and your bumper says cobra, its an 01). No, his old SC will not fit your car at all. And no, you won't have to lower your CR to fit an SC.
  19. triggz

    You ever get tired while waxing and give up?

    You zymol guys, are you finding the real ZYMOL stuff? If the bottle says chicago on the back, then its just turtlewax in a zymol bottle..
  20. triggz

    B&M Hammer Auto Shifter

    It does lock up the rear end for a split second while it engages a secondary mechanism. Its just the nature of the transmission. But as jeffnoel said, if you manipulate the throttle just right you can completely negate the bump of downshifting. My car sounds and feels like a manual downshifting...
Top Bottom
Back
Forums
Menu