Search results

  1. bigsparky

    Electric Fan or Not to Electric Fan?

    is there a how-to of how to install an sn-95 fan?? what do you need??
  2. bigsparky

    Hot starting problems... FACTORY headers!

    Nope.. the alternator wiring is fine. The alternator is putting out the right volts (tested it myself, and had it tested)... the battery is pooched (according to the test)
  3. bigsparky

    Hot starting problems... FACTORY headers!

    BTW- the starter was freshly rebuilt less than a year ago, just before I bought it and i still have the receipt.
  4. bigsparky

    Hot starting problems... FACTORY headers!

    UPDATE- I went outside again, tried starting it and it wouldn't go. So then i boosted it with our truck (because the way it cranked sounded to me like a drained battery)... once I boosted it, it started with no trouble at all. So I took it to partsource to get the charging system checked and...
  5. bigsparky

    Hot starting problems... FACTORY headers!

    I've noticed for a little while that my car doesn't like to start AS good when it's hot. It cranks a lot slower than it does when it's cold. Then today, I came home from work, came in the house and did a few things, went back out and it wouldn't start, and still won't. I checked the voltage...
  6. bigsparky

    What Garage?

    I have a code reader if you want to borrow it. Let me know
  7. bigsparky

    Saskatoon meet????

    consider yourselves invited and redalrt.. i'll definately be there to see your car... I wanna check that thing out!
  8. bigsparky

    Saskatoon meet????

    We should organize some sort of meet.. I wouldn't mind meeting the mustang crowd in saskatoon
  9. bigsparky

    I can't beleive it...

    yes i believe I met him. If it's the guy i'm thinking of..... it all makes sense now. I don't have access to the thread you posted but he told me (if this is the guy) that he bought some intake from the states and the guy never sent it... so instead of dealing with it he just decided to sell...
  10. bigsparky

    Question About Battery/Alternator

    Sounds to me like the regulator in teh alternator is pooched. I'm not sure if rebuild kits come with a new regulator or not
  11. bigsparky

    Dust cover on tranny

    Nope. It doesn't do it every time. I'd say once every 10-15 times I start moving. If the disc was worn out that bad wouldn't it be slipping really bad???
  12. bigsparky

    Dust cover on tranny

    It only squeeks when just taking off in 1st gear. Just as the car starts moving and the clutch is just partially engaged it squeeks for a second. This only happens once in a while and that is the ONLY time it happens
  13. bigsparky

    Dust cover on tranny

    could it cause the clutch to squeek a bit??? I'm having this sort of squeek come out of the clutch when I release the clutch.... I'm hoping this is related
  14. bigsparky

    Dust cover on tranny

    What can happen??????
  15. bigsparky

    Dust cover on tranny

    I noticed the dust cover on the tranny that covers the hole where the cable goes into the tranny is missing. What kind of problems can this cause? If dust got in there could my clutch slip or squeek???
  16. bigsparky

    Do I need this piece?

    K thanks.. that's what I figured. And yes I definately hear that sound... it sounds like there's a miniature weedwacker inside my engine bay. Time for a short belt to bypass the smog pump. What's the part #??
  17. bigsparky

    Do I need this piece?

    I put in my offroad h-pipe in today and while doing it, instead of hooking the smog tube back up, I had the bung welded shut so I can remove all the smog equipment later. So that tube that comes from the engien to the cats, I just pulled out where it connects to the rubber hose inside the...
  18. bigsparky

    header-midpipe bolt size

    Sorry... I meant to say that I'm removing the old one... and i need to know the factory size of the nuts..... Sorry for the confusion
  19. bigsparky

    header-midpipe bolt size

    well i read on one or two threads that it's possibly 15mm... so I went out and tried but it won't fit over the nuts. I also tried 5/8 and it was very close but a bit too big.. what do I do??
  20. bigsparky

    header-midpipe bolt size

    I'm in the middle of an H-pipe install and I can't seem to find the right size for the bolts that join the header to the h-pipe. Does anyone know?? Please help
Top Bottom
Back
Forums
Menu