Search results

  1. jd-hart

    For those with Air Compressors in the garage...

    I just received a Craftsman air compressor for the garage as an early Christmas present. I am confused on how the regulator works. My impact says it needs90 psi and no more than that. The compressor shuts off when the tank pressure gets to 150psi and comes back on at 120psi. The problem...
  2. jd-hart

    clutch safety switch wiring

    The plugs for the safety switch are already in your car. Look up under the dash and they are usually taped to another harness. All cars came with them, 5sp or not.
  3. jd-hart

    Installing stud kit for rear-end cover.

    This is going to sound dump, but I just want to make sure... I have the ford racing rear end cover with the load bolts at press up against the bearing caps. Ford recommends their stud kit with this cover. The stud kit had no directions. There are four studs and I assume they go above and...
  4. jd-hart

    Injector size with no FMU on stock engine

    Thanks for the input.....
  5. jd-hart

    Injector size with no FMU on stock engine

    I tried searching but I can't find a concrete answer. I am looking into adding a Vortech with 8-10lbs of boost on a stock 1990 Mustang. Only mod is the air silencer is removed. (Haven't even bumped the timing) From reading other posts I would rather not deal with the FMU. I plan on adding a...
  6. jd-hart

    Photoshop wheel help please.....

    Could somebody photoshop this wheel on this car? Thanks:nice:
  7. jd-hart

    Shelby Razor's on a Fox? 17x9

    Dang, not quite sure if I like them. Maybe it will look different in person:shrug: I like the wheels, put when they are photoshoped, they look like a tad too much "bling" for me???
  8. jd-hart

    Shelby Razor's on a Fox? 17x9

    Can you photoshop on this car? Thanks
  9. jd-hart

    Shelby Razor's on a Fox? 17x9

    I have always liked them on the new Mustangs, but I am curious on how they would do on a fox body?
  10. jd-hart

    Shelby Razor's on a Fox? 17x9

    I tried searching but couldn't find anything about these wheels on a fox body? Has anybody done this? Any pics? Correct me if I am wrong, but the Shelby Razors in 17x9 have the same offset as an 03 Cobra wheel.
  11. jd-hart

    Is the GT-40 intake still available?

    I have tried summit and jegs and nobody has them. It is not listed in the new 2006 Ford Racing catalog. Has Ford quit making them? I am looking for the upper and lower set. I believe the part number is FMS-M-9424-A51. Anybody know where I can buy it? Thanks
  12. jd-hart

    Is this A/C factory??

    I was sort of thinking that. Like the car didn't come factory with A/C and it was added.
  13. jd-hart

    Is this A/C factory??

    The guy that is selling it says that is hasn't been converted. Although, he doesn't seem to know much about the car. Do you believe it was a factory A/C car? Can you tell by the VIN if it was factory air?
  14. jd-hart

    Is this A/C factory??

    Sorry. Had a little problem with the pic. It should be there. Can click on it for a bigger pic. Thanks
  15. jd-hart

    Is this A/C factory??

    [/URL][/IMG]I am looking at a 92 LX and it has this A/C setup. Has anybody seen this before? Is it factory? Or an add-on? Thanks.
  16. jd-hart

    24lb vs. 30lb injectors for the Ford Crate 5.0?

    Thanks, that is the thread I was looking for. So I guess the verdict is 24lb?
  17. jd-hart

    24lb vs. 30lb injectors for the Ford Crate 5.0?

    Yeah, I hear ya on buying parts twice. If I do add the 30's will it run rich, without any other mods done to it? I forgot to add, that it will have the cobra intake, and I have the 190 lb ford racing fuel pump. The tech at Ford Racing said I didn't need an adjustable fuel pressure...
  18. jd-hart

    24lb vs. 30lb injectors for the Ford Crate 5.0?

    I thought there was a thread similiar to this one, but I couldn't find it. I am planning a swap this winter. I am looking at the Ford Racing crate engine. The XE3M that ford says does 345 hp. It has the Turbo Swirl heads and E-cam. Ford Racing suggests 30lb injectors. I was thinking...
  19. jd-hart

    Can't get car to start with Clutch Safety Switch?

    I am done with my 5sp conversion. I can't get the car to start with the clutch safety switch. I got the whole T-5 harness, so the NSS on the tranny is hooked up. The car will start fine, with the plug attached. As soon as I take out the plug and connect the two harnesses into the...
View older results
Top Bottom
Back
Forums
Menu