Search results

  1. dkins419

    97 t5 trans

    The input shaft on the t-5 or t-45?
  2. dkins419

    97 t5 trans

    well i have it right now and it looks just like my t-5. do the t-45 looks the same as the t-5? Also does anyone know the rating of the 97 v6 t-5 (hp and torque rating)? I compared the 97 trans next to my t5 and it all looks the same. Driveshaft fits on it and the front is the same length.
  3. dkins419

    97 t5 trans

    :shrug:
  4. dkins419

    97 t5 trans

    Can i use a 97 mustang t5 transmission in my 88 gt? any differences?
  5. dkins419

    Whining transmission

    i just recently took my t5 out for a rebuild. It whined like a supercharger and i always got looks like wtf is that lol. The previous owner never fixed the trans leak and drove it for a while like that. All 3 of the shafts are damaged badly so now im getting a different trans.
  6. dkins419

    h pipe cats question

    o2 sensors replaced, iac cleaned, egr valve cleaned, throttle body cleaned, seafoamed it real good, new spark plugs/wires, cap/rotor, all fluids changed. Vac leaks fixed. Im really just wondering if the cats on the stock h pipe could affect the 02 sensors if they are getting clogged.
  7. dkins419

    h pipe cats question

    anyone?
  8. dkins419

    in need of a t-5 badly

    well i found an almost new wc t5 for $400 from a good friend. Thanks guys.
  9. dkins419

    h pipe cats question

    well ive tried almost everything and i still get poor gas mileage. My car runs great. I have the stock h pipe and i was thinking since they already restrict flow and my car having 85k miles on it, that they may be clogged a little. Could the exhaust fumes effect the 02 sensor reading if they...
  10. dkins419

    in need of a t-5 badly

    alright well i was gonna rebuild my transmission until i took it apart and found out i need all of the 3 shafts from being damaged to a previous owner who never fixed the trans leak. Does anyone know a place where i can find the cheapest price on a rebuilt transmission? or does anyone have one...
  11. dkins419

    broke speedo gear clip

    ALright so i was trying to get the clip off and it snapped really easy.(rebuilding my t-5) Im talking about the part that is on the input shaft. Does anyone know where i can get one?
  12. dkins419

    Roll Pin in Offset Lever (t5 rebuild)

    Alright, I can't get it out. I have it in neutral between the 3-4 position. Does anyone know if im suppose to be hitting it downwards? But i don't get how you can do that when there is no space hardly for the pin to go through? Im trying to get that top case part off to see if I need any new...
  13. dkins419

    Transmission bolt to bellhousing

    well i got it and it was another pain in the ass just like the h-pipe bolts to the headers. Took a real big pipe and lots and lots of strength. Thanks you guys for the help.
  14. dkins419

    Transmission bolt to bellhousing

    Wait im talkign about the passenger side top bolt from the transmission to the bell housing not the bellhousing to engine or is this what your talking about?
  15. dkins419

    Transmission bolt to bellhousing

    alright thanks for the replies. Im going to try right now from under the hood.
  16. dkins419

    Transmission bolt to bellhousing

    Well i need to get 1 last bolt out to get my trans out and i can't get it! ****!111 Its the top passenger side bolt to the bellhousing. Any tricks for this one or something that im missing out on?
  17. dkins419

    Grinding into 2nd and wont stay.

    Do you have the stock clutch cable/quadrant/adjuster? EDIT: nm i seen at the top.
  18. dkins419

    header to h pipe bolts!

    A propane torch. You know the ones you can find at the hardware store. Then just heat up the bolts real hot.
  19. dkins419

    Master Rebuild Kit and Synchros for T-5

    I just ordered my rebuild kit from them about half hour ago.
  20. dkins419

    header to h pipe bolts!

    i wish i had those :(
Top Bottom
Back
Forums
Menu