Transmission bolt to bellhousing

[dkins419]

Well i need to get 1 last bolt out to get my trans out and i can't get it! ****!111
Its the top passenger side bolt to the bellhousing. Any tricks for this one or something that im missing out on?

 

[fox racer]

grab a big wrench... and do it from under the hood... its tight but its easier that sockets and swivels... you can also drop the crossmember,and drop the tranny a bit (to tile the motor) and you can get a better angle at the bolt form underneath.

 

[slow84lx]

I do this bolt from under the hood also.

 

[dkins419]

alright thanks for the replies. Im going to try right now from under the hood.

 

[dkins419]

Wait im talkign about the passenger side top bolt from the transmission to the bell housing not the bellhousing to engine or is this what your talking about?

 

[slow84lx]

I do this bolt from under the hood also.

I was referring to the bell housing to engine bolt as I thought that is the bolt you are having trouble with.

 

[fox racer]

I was referring to the bell housing to engine bolt as I thought that is the bolt you are having trouble with.

if its the tranny to bellhousing bolt thats even easier.. just get a socket on it and a pipe on the wrench for leverage and force it off.

 

[dkins419]

well i got it and it was another pain in the ass just like the h-pipe bolts to the headers. Took a real big pipe and lots and lots of strength. Thanks you guys for the help.

 

[fox racer]

well i got it and it was another pain in the ass just like the h-pipe bolts to the headers. Took a real big pipe and lots and lots of strength. Thanks you guys for the help.

no prob.. good to hear, and good luck man