Search results

  1. 90silverstang

    Vacuum @ Brake Booster??????

    Thanks for your help!
  2. 90silverstang

    Vacuum @ Brake Booster??????

    I'm not class racing. I told the builder my set up and built the 347 engine to 373 gears manual T5.. The idea of a vacuum canister is to hold more capacity of vacuum? I have done more investigating on the symtons---- The first push on the pedal feels like the booster works and the car...
  3. 90silverstang

    Vacuum @ Brake Booster??????

    Don't Know what cam is in it because I bought a crate engine and the builder does not disclose the cam specs. The pedal is stiff and high. The booster is new. tried adjusting the push rod length but NG. Is there anything I can do to assist the booster??
  4. 90silverstang

    Vacuum @ Brake Booster??????

    I searched around but could not find an answer. How much vacuum is needed to operate the stock brake booster. I have a 347 with a lopey cam. I am measuring 10" of vacuum. Is this not enough vacuum to operate the booster correctly??
  5. 90silverstang

    Valve cover breather hose routing question

    TTT
  6. 90silverstang

    Valve cover breather hose routing question

    I have a 347 with valve covers that have breather ports on the left valve cover and a port for a oil fill cap with a hose port. My question is can I route both valve cover breathers to the port on the throttle body or do I use one valve cover breather?
  7. 90silverstang

    Edelbrock Performer RPM II Intake Vacuum Line Connections

    Strype, #5 connects to the charcoal canister.
  8. 90silverstang

    Edelbrock Performer RPM II Intake Vacuum Line Connections

    TTT
  9. 90silverstang

    Edelbrock Performer RPM II Intake Vacuum Line Connections

    Can anyone help with this??
  10. 90silverstang

    Edelbrock Performer RPM II Intake Vacuum Line Connections

    Edelbrock Performer RPM II Intake Vacuum Line Connections need help! I have a performer rpm II intake that I am installing. Wanted to ask how are you guys are routing you vacuum lines. The lines that need to be connected are: 1. 3/8" main vacuum supply hose to vacuum tree. 2. 3/8" vacuum...
  11. 90silverstang

    Engine, LT headers w/ T5 install

    Question about installing Engine, LT headers w/ T5 install Hey guys, need someone with experience with installing engines LTs and 5 speeds I'm intalling a 347 with LT headers. I installed the engine and snaked the LT headers when the engine was 3/4 of the way in. The bell housing was on the...
  12. 90silverstang

    Can't get T5 to seat completely to Bell housing

    Thanks for the reply, I got the T5 to seat on the bellhousing. I released the clutch as my buddy pushed the tranny in and it seated all the way. I guess the clutch disk wasn't totally aligned with the pilot bearing.
  13. 90silverstang

    Can't get T5 to seat completely to Bell housing

    I have a centerforce II clutch with corresponding disc, this is a 347 stroker crank w/ new pilot bearing,new fork, release bearing, flywheel and pivot ball. I can get the t5 through the splines of the disk but the rear bearing retainer housing won't seat to the bell housing. Its about 3/16"...
  14. 90silverstang

    Front End/Engine Bay Detailing Project

    Engine Bay Detailing Project And what a project it is. I haven't posted in a while but here is the progress I made. Purchased a mig welder to repair the passenger side hinge mount and to weld the holes in the engine bay.. I will post Pics of before and after pictures. I have never mig welded...
  15. 90silverstang

    project 91GT

    Thanks for the reply. That tool is just what I need, I will probably welding the bay solo. Very nice paint guns. Looks like your gearing up to shoot the engine bay.
  16. 90silverstang

    project 91GT

    Welding Holes First I want to let you know that I am new to welding. I just purchased a Hobart 140A mig welder. Put some .025 wire in it with Stargon gas. I got a scrap fender from a local body shop that I will practice on. So with that said, when you use a piece of brass to put in back of...
  17. 90silverstang

    project 91GT

    Custom, Question,--- Did you weld the holes in the engine bay or did you duraglass over the entire engine bay or did you weld and duraglas the bay. Thanks
  18. 90silverstang

    Front End/Engine Bay Detailing Project

    Thanks Smoke. I purchased a Hobart welder from Northern Tool. I figured I should get a good welder. I would hate to buy one twice. FREE SHIPPING — Hobart Handler 140 MIG Welder — 115 Volt, 140 Amp, Model# 500500 | Wirefeed Welders | Northern Tool + Equipment Will the backing plates stay on...
  19. 90silverstang

    project 91GT

    All I can say is you have a gift. Your work and I mean work and skill is very impressive.
  20. 90silverstang

    Front End/Engine Bay Detailing Project

    Thanks for the pics. How did you run your light wiring ?
Top Bottom
Back
Forums
Menu