Search results

  1. ras50gt

    Can't decide:short block

    TTT
  2. ras50gt

    Can't decide:short block

    I want to start an engine build as a winter project. I thought I made up my mind to go with a 331 but thinking more and more about going the 351/393w route. I know there are a ton of threads on 331/347 vs 351w, and I have read a lot of them. But, wanted to throw up a quick poll Which would...
  3. ras50gt

    Tensioner pulley?

    Well, got it on. The new one didnt come with a washer/spacer, so I used the one from the stock one, but then the pulley wasnt spinning.Anyways, took the washer out and it seems to work now. Anyone have that problem? shouldnt matter right? Hope I dont have problems
  4. ras50gt

    Tensioner pulley?

    Just got home from work and heading out to replace the tensioner pulley. So, install is just remove the bolt,pop the old tensioner pulley off and put the new one on? Do I have to release the complete tensioner assembly first?
  5. ras50gt

    347 startup video

    Sounds awesome man :nice: Post another vid and give it some gas, I wonder what it sounds like not just at idle... What mods do you have? exhaust?
  6. ras50gt

    Tensioner pulley?

    I got mine from summit, its a goodyear. Its all metal, I looked at kragen and theirs was plastic so I think this one will last. Was just worried about the lips not being there. I couldnt see spending 74 bucks for a fancy billet alum one and didnt need the entire tensioner assembly. Hopefully it...
  7. ras50gt

    Tensioner pulley?

    It does NOT have lips on it, thats what I was worried about....
  8. ras50gt

    Tensioner pulley?

    I would have been sitting there saying "righty tighty, lefty loosey" lol So, what about the new one being smooth? doesnt matter?
  9. ras50gt

    Tensioner pulley?

    Ordered a new belt tensioner pulley from summit, got the goodyear one. The original stock one was making a lot of noise. Anyways, noticed the new one doesnt have the indentations like the stock one has where the belt goes between, will this matter?? Its just smooth all the way around. How...
  10. ras50gt

    Can I bolt this to a 351w

    Sorry, tried it in talk and thought it might be better in tech and get more responses, considering if the only way is to modify the bracket-I would need technical help.
  11. ras50gt

    Check Engine light help please

    So, I guess if you pull 41 and 91-both lean codes then its usually most likely a vacuum leak. Looked around and found the vacuum hose that goes from the canister to under the intake was brittle and broke in half. Only had a little hose left so did a quick fix. The hose I used is ok for now but...
  12. ras50gt

    Can I bolt this to a 351w

    Can I bolt up a paxton sl 1220 kit for my 93 Gt to a 351w?? I was going to build a 331 but think I might go with a 351w. I already have the supercharger and figured someone has probably done this before. Is there a swap bracket for this? IF not, there should be lol. Any ideas?
  13. ras50gt

    331 or 351w-s/c?

    Looking at going with a 393w now.... Any other opinions? and anyone about the blower?
  14. ras50gt

    331 or 351w-s/c?

    Ive been long planning a 331 build, and actually think I might start a build soon-as a winter project kind of thing. Anyways, I was thinking a 331 low compression, h/c/i and then I already have a brand new paxton 1200 kit ready to go. However, after thinking about it more and talking to...
  15. ras50gt

    Check Engine light help please

    Its a 93 Gt......
  16. ras50gt

    Check Engine light help please

    So finally got around to pulling codes...... Got code 41 and code 91 41-no HEGO switching detected HEGO sensor circuit indicates system lean 91-HEGO sensor indicates system lean no HEGO detected ALSO, think I got code 123, but not sure lol 123-tps sensor...
  17. ras50gt

    Which Catted H/X-pipe offers best ground Clearance?

    I have bbk shortys and catted Magnaflow x-pipe. Doesnt sit too low, looks nice, sounds awesome. Also, passed smog with ease. Definitely a nice piece. My friend has a bbk x, he wishes he got the magnaflow. Magnaflow more expensive tho. The fit was great and install easy. Only regret I have is...
  18. ras50gt

    Idle Air didn't fix

    Only mods are bbk shorty headers, magna x-pipe with cats. So, just pull the vac line from the egr? and if it idles better, then the egr is bad? Should I put the old Ford IAC back on then?
  19. ras50gt

    Idle Air didn't fix

    My car sounds like I have a small lopey cam in it- sounds cool but I know something is wrong. People have even pulled up to me and asked what cam im running lol. Anyways, I was told it was probably my IAC. So, I cleaned it-idle seemed to get better but still present. I went down to kragens and...
  20. ras50gt

    paxton novi 1220 VS vortech v-3 si trim

    I bought a paxton 1220 sl polished. Got a good deal on it, Jegs had the polished sl listed for less than the satin, plus they had a $250 rebate then. I havent installed it yet for a few reason, one being that my car has 128k miles. Bunch of parts I want to put on before the s/c. Like...
Top Bottom
Back
Forums
Menu