Search results

  1. k00ksta

    Fuel Preasure Regulator Suggestions

    What brands can you guy suggest? Also what gauge would be decent to use with it?
  2. k00ksta

    Wow, 5 year old gas in tank = BAD

    Same Situation My car sat over the winter and I did not dump any stable in the tank :notnice: I tried to fire it up this weekend and it did start but im getting white smoke out the tail pipes there is literally less than 1/4 tank in the thing should I try to dump some stable in it and maybe 5-6...
  3. k00ksta

    Parking Brake Cable - 5 Speed

    Anyone know how I go about re-spooling the parking brake assembly before I re-attach the front parking brake cable? The old cable snapped which un-wound the assembly is their any trick to it?
  4. k00ksta

    My 1994 5.0 GT has vibration/shakes at idle and all speeds

    My thoughts exactly as well. :nice:
  5. k00ksta

    Replacing O2 sensors

    Any time I have ever done o2's I just fire the car/truck up for about 3-5 minutes to heat the exhaust up a little just wear long sleeves and you wont burn the piss outta yourself :] makes it pretty easy to get them out imo.
  6. k00ksta

    Oil Pump Drive Shaft Issue

    I just put my motor back in my car and when I went to stab my dizzy back in I could not get it to drop completely in so when I pulled it back out I could see the Oil Pump Drive Shaft has popped out the oil pump :((( here is a pic I am not sure if the retaining clip / washer is still...
  7. k00ksta

    RMS Seal Inspection

    You know what just dawned on me .. I do not believe I even used any lock tight on the fly wheel bolts! I really am starting to think it was blowing past the threads on the bolts .. :stupid: :nonono: :rlaugh: I will replace the rear main seal just for good measures as well can anyone suggest any...
  8. k00ksta

    Can someone please identify this

    lol I have actually always wondered what that was myself. 2 points to the man in the big black top hat!
  9. k00ksta

    Pics of project 400rwhp N/A stock block 331

    mm that cam sounds nice. What kind of mufflers/h-pipe/x-pipe you got on that baby?
  10. k00ksta

    Started the 3.73 Swap!

    Ya for real TAKE TONS OF PICTURES! not just so you can post them but so you know what was where before you even began :] good work and hope you have nothing but success! :flag:
  11. k00ksta

    RMS Seal Inspection

    Alright guys I had noticed during this past summer that I was getting a little oil drip coming from either the rear main seal or the pan gasket. I inspected everything else on the back end of the motor the best I could with it in the car but finally just said screw it lets pull it and inspect...
  12. k00ksta

    Engine Stand Bolts

    Man I wish I would have seen that before I went out and bought them 7/16 bolts lol because I have a box of ARP head bolts sitting on the shelf in my garage. Oh well all is well now. Thanks for the reply
  13. k00ksta

    Engine Stand Bolts

    Thanks guys Seriously you guys have no idea how much this helps lol. Thanks again for the responses. :nice::nice::nice:
  14. k00ksta

    Engine Stand Bolts

    I just picked up an engine stand and they sold me the wrong bolts :mad: I got a set of 3/8" -16 x 4" Grade 5 Bolts and washers. These do not work on my block so does anyone know the size I should be using to bolt my engine to my stand? I am not sure but I think they should be possibly a 7/16 in...
  15. k00ksta

    Under Drive Pulley Kit Question

    Ya I am going to agree with you and just pull the trigger. You know this only comes with a Water Pump Pulley, Crankshaft Pulley and Alternator pulley. Can I get one to match the power steering, idler pulley, any others? All I find is black ones and if I go with a set of Chrome or Blue ones it...
  16. k00ksta

    Under Drive Pulley Kit Question

    I am looking to finally ditch my stock pulleys and go with a set of Aluminum Blue Anodized pulleys. But I have a question about the 25% under drive. Will this cause me to have any alternator charging or cooling issues with my setup? I do have a Hypertech thermostate 160 degree I believe is the...
  17. k00ksta

    Throttle Body Comparison

    My thoughts exactly. I am def. going to go with the 75mm I have the original TPS on my throttle body now and IAC should I look at replacing them as well while I am at it? :flag: Also our cars are the same color so rock on :]
  18. k00ksta

    Throttle Body Comparison

    Im in the market for a throttle body and I cannot find a reason to detour myself away from (the cheaper one) at this point. Can anyone tell me why they would spend the extra coin over the Summit Brand 70mm (143$) throttle body Summit SUM-227214 - Summit Racing Street & Strip® Mustang Throttle...
  19. k00ksta

    timing 180 out

    You probably did not harm anything except your ear drums :rlaugh: hopefully it was late at night too so your neighbors got to enjoy it :nice:
  20. k00ksta

    Rocker arm and guideplate questions

    Excellent Post! :nice: Maybe we can get a Mod to Sticky that incase anyone else needs it :)
Top Bottom
Back
Forums
Menu