Search results

  1. 6

    temp sending unit

    I hadn't thought about buying a new harness. It's soooo random it's not even funny. It rarely happens but when it does it's unnerving. I will just cut it for now. It's an easy fix and if it works great. It only happens 2-3 times in the last 3000 miles. It could be my gauge as well it is...
  2. 6

    temp sending unit

    Just cut the existing connector and use a ring connector ? I will check to sending unit to make sure it has threads.
  3. 6

    temp sending unit

    Exactly.... could that explain the gauge behavior ?
  4. 6

    temp sending unit

    Every once in a while I noticed my temp gauge would max out and then go back down. It was totally random of when it would happen. Well I was screwing around and I noticed connection to the sending unit was incredibly loose. I mean there was no resistance when pulling it off the connector...
  5. 6

    Installing fog lights

    If you do a search, you will find some quick notes I wrote up about what you need to do. You don't have to cut your harness at all if you have the correct harness. There's a step that talks about hooking up the rear tail lights so they come on with the fog lights. That step "might" require...
  6. 6

    WANTED: 4 barrel spacer

    Looking for an original 4 barrel spacer. I am using it with a 4 barrel Autolite. [email protected]
  7. 6

    what's wrong with this shelby?

    Not saying I disagree with you....however if you have 150 grand to spend on a car (shelby or otherwise)...you must be doing something right. It's all about priorities. I think people buy these cars purely as investments now. Chances are someone will buy it, fix it to be factory correct and...
  8. 6

    Sunroof/moonroof on a 65 coupe

    IF....and that's the key word.... IF you ever go to sell it, the market of people who will want that is very very small in my opinion. Just something to consider. It's you car so I say do as you wish :D. Of course you could find someone who loves that idea and will readily buy your car when...
  9. 6

    68 Cougar console

    Are 68 Cougar center consoles the same 68 Mustang center consoles ?
  10. 6

    4 lug to 5 lug conversion What will i need?

    Pitman arm is also different.
  11. 6

    WANTED: 66 Mustang shop manual

    Wanted 66 Mustang shop manual. Will pay with paypal or money order. Email me at [email protected]
  12. 6

    Wheels in the Restomod daze magazine

    Wonder what the American Racing version would run. Nice looking wheel.
  13. 6

    To Power Steer or Not To...hmmmm

    IF my car had original power steering then I'd rebuild it. It's something I wish I had. I have manual steering right now. I have a Flaming River steering box and it's definitely tight. I also have a roller bearing kit in the idler arm and that makes a difference as well...but nothing beats...
  14. 6

    WANTED: Rebuildable Autolite 4100

    PM and email sent.
  15. 6

    How do I wire a 66 center console ?

    I will double check the bullet connectors at the heater duct. I think I recall seeing one but I am not 100% sure about two. My wiring harness runs the length of the console. I don't know if I need one to connect mine to the existing wiring. I will have to look at the connectors. It's...
  16. 6

    How do I wire a 66 center console ?

    I am trying to put in a center console and trying to figure out the wiring. I have one wire under my dash that I think goes with the console but anybody who could give me the setup would be appreciated. I pulled off the shifter plate and there aren't any wires there. Based on the way the...
  17. 6

    WANTED: Rebuildable Autolite 4100

    Looking for a rebuildable Autolite 4100 and a 4 barrel intake.
  18. 6

    How do I ID a 1.19 Autolite ?

    I am just curious, how do you definitely ID an Autolite 4100 1.19 Venturi. Just curious because I think I saw one at a restoration shop. The guy claimed it came off an old Mercury.
  19. 6

    Hours needed for AOD swap

    Location If you take 28 out of old town towards Bristow....before you get to Bristow you will pass a Burger King and a McDonald's on the left. It's in there and if it's nice weather, it's a fun place to hang out. Great cars come by.
  20. 6

    Hours needed for AOD swap

    I will give them a call bud. I appreciate the heads up. By the way, do you ever bring your car out to the Burger King on Rt 28 on Saturdays ?
Top Bottom
Back
Forums
Menu