Search results

  1. T

    intake to valve cover clearance

    Which intakes will clear the 87-93 valve covers on a 95 mustang without using the 1/2 inch spacer. I have a cobra intake now but I have to use the spacer with it because the egr hits and the vacuum pipe on the drivers side hits. I want to keep my stock hood so that is my problem with running...
  2. T

    First Mods To Do?

    Get a intake, underdrive pulleys, cold air intake, and bump up your timing. You will pick up 20-25 rwhp for about $600-800.
  3. T

    performer rpm 2 intake ?

    does anyone run this intake yet? The numbers I saw in 5.0 mustang were pretty impressive. I would like to know how it does as far as low end power. I drive my car on the street a good bit of the time. Maybe someone could tell me if it would work good with my set up. It will be replacing a...
  4. T

    Finally joining the AFR crew!! Killercanary will be proud. :o)

    I just got done putting the same heads on my car about three weeks ago. I took it to the 1/8 mile track the week before I put them on and turned a 8.9 at 80mph on street tires. I turned a 8.75 at 83mph after the heads. I have played with fuel preassure or timing yet. I still had a tank of 89...
  5. T

    question about headers

    does anyone know if the fox body longtubes will work in our cars
  6. T

    convertable top issue.

    I had a 88 vert gt that did the same thing and there is no way to fix it. I had my top replaced but the fit was still not the same as the original so be careful in selecting a top. My buddy has a 93 vert and we did his top. We learned that you should really leave that to the professionals...
  7. T

    Motor jerks around 2000 rpm???

    Finding fitting to cover the egr on the header is a pain. I took my headers to the hardware store and found nothing. I ended up going to local store that makes hoses and steel lines and sells all the fittings for them. The only thing that they could find to fit was a hydraulic line fitting...
  8. T

    need help with a hesitation problem

    The thing I forgot to mention is that every intake port has oil on the gasket arount the port. My car does not smoke or anything like that.
  9. T

    need help with a hesitation problem

    When I drive my car normal I have a slight hesitation. When I get on the gas its accelerates with no problems. I just put a MSD distributor and new injectors in and that did not help. I think I might have a collapsed lifter and I was wondering if that might cause it? When I pull my upper...
  10. T

    Got a Ticket

    I can't believe you guys on the motorcycles stopped. If I am tripleing the speed limit there is now way in hell I am stopping.
  11. T

    FORD's BS ..... BS!!

    best way to fix that is to beat a socket onto the lock loosen it up then replace them with different ones
  12. T

    Got a Ticket

    I got a ticket for 105 in a 55 in a little town called Sparta, Georgia. I got a lawyer and all I had to do was pay the fine and it didn't go on my record.
  13. T

    powerdyne supercharger?

    I have a chance to purchase a powerdyne for a grand. The only thing is that it is on a 89 mustang. Is everying thing the same set up for my 95 except for the itake pipe or is there other differences in the kits? How much will it cost me to make this kit work for my car. It is a 9 psi kit...
  14. T

    I need some quick feedback because I want to take my car to the track tonight

    a friend of mine came over and adjusted the valves and they still have clatter just the same. He said that with the roller rocker you will have some clatter. Does this sound right to anyone?
  15. T

    I need some quick feedback because I want to take my car to the track tonight

    how freakin hard can this be? I downloaded compcams instructions for the install and i followed them to a t. I put my car back together and fired it up. I really should say tried to fire it up. It finally fired and sounded like a f**king harley davidson. I dont know what the f**k is wrong...
  16. T

    I need some quick feedback because I want to take my car to the track tonight

    I have adjusted them twice now just like everyone has said and I am still getting a clacking sound. I have rechecked my clearances and the geometry of the rockers look good I am just kinda at a loss right now
  17. T

    I need some quick feedback because I want to take my car to the track tonight

    sirshureshot that is exactly how I adjusted them. I just don't understand one thing. I tighten to zero lash and give a quarter turn then I completely rotate the engine one full turn and stop back on the same point that I just tightened, but I did not tighten the allen set screw. When I...
  18. T

    I need some quick feedback because I want to take my car to the track tonight

    I loosened the allen set screw on the rocker stud. The adjuster nut on top of the rocker was not even hand tight. What would cause that? I have adjusted everything just like they specified, but I must be doing something wrong can somebody please tell me what.
  19. T

    I need some quick feedback because I want to take my car to the track tonight

    I have just pulled my valve covers off of my car. My rockers have been clacking and making noise. Can someone tell me if I am right or wrong in my thinking. If I tighten the nut on my stud mount rocker arms to the point that the pushrod will not spinn and then I give it my half turn while the...
  20. T

    best way to spend 400$?

    If you have 3.27 gears then I would buy an aftermarket intake. If you have 2.73 or 3.08 then I would definitely get the gears
Top Bottom
Back
Forums
Menu