Search results

  1. T

    Stuck Transmission

    found carse Shift Block inside shifter came loose
  2. T

    Stuck Transmission

    If you have been reading my posts for the last week you know I have been working on a T-45 Swap. I have finished mounting the T-45 on the motor and am installing the driveshaft. I went to place the motor in Neutral and I can't get into/out of gear oir neutral! No fluid....will I mess...
  3. T

    BELLHOUSING BOLTS

    they do Long ones go in dowels....
  4. T

    BELLHOUSING BOLTS

    Hey Guys. I am ready to put my transmission back onto my 97 Cobra (T-45). and noticed that two are longer than the others...do these go into the dowels?
  5. T

    gas is $4 here, is any one here grandma shift ?

    3.73 gers I reach high revs quicker than before...so I try to shift at 3000 rpm...grandma style to save gas.....Getting about 27 highway and a lot less city....
  6. T

    Speedo Gear question

    bump forgetit...got it
  7. T

    Speedo Gear question

    I removed the tailhousing from both the T-45 from a GT and My Cobra. Which one is the speedo gear and do I really need to swap? First picture is T-45 from GT...seems the gear has 14 teeth. Second is T-45 from Cobra...it also has a gear w/ 14 teeth... do I really need to change them to have...
  8. T

    COBRA TRANSMISSION IN GT????

    Yes and no The answer is both yeas and no. Let me explain 1. The 1996-2001 GT's and Cobra's have t-45 transmissions (which will bolt right up at the engine side. 2. The Tailshaft is different between 96-98 Cobra's. A 99 Cobra t-45 will fit a 99 gt though. Make sure that you have the same...
  9. T

    t-45 Tailhousing Swap

    more info "With shifter removed, drive the split roll pin through shift block with 3/16” punch." this mean pound on it until it becomes loose? Use hammer or softhammer?
  10. T

    t-45 Tailhousing Swap

    Tailhousing thanks for the response man. I would like to keep the Cobra Crossmember the way it is. The location (further rearward that the gt) was selected to move the cg closer to the center for better handling (or so I have read/heard)
  11. T

    t-45 Tailhousing Swap

    Anyone know of a "how to" or write up on how to swap the tailhousing on a t-45. I am trying to find out how to swap the tailhousing and speedo gear from a Cobra t-45 to a GT t-45. Thanks
  12. T

    Transmission Qestions

    More info I forgot to add that I had 3.73 gears before I started the T-45 switch and had the correct speedo...do I still need to change it? Also...foud out that the last time the clutch was changed was 4yrs ago (20k miles since then). Should I leave the clutch on or remove to inspect? (I do...
  13. T

    Transmission Qestions

    Pictures Hello Mike, Thanks for your response. I took a photo of the inside of the bellhousing and the pivot ball seems ok. Any idea on where the borg-warner part no. or casting no. can be found? I am trying to figure out if its a GT or Cobra Transmission. I figure that I might need to...
  14. T

    transmission questions

    Hey Guys, First off, thanks to the forum members who sent me tips on removing the strater (damn third bolt). I have a few more questions for you all: 1. Anyone know the size of the bellhousing bolts (metric size/thread/length)? Mine were pretty rusted on the head and I do not want...
  15. T

    Transmission Qestions

    Transmission Questions Hey Guys, First off, thanks to the forum members who sent me tips on removing the strater (damn third bolt). I have a few more questions for you all: 1. Anyone know the size of the bellhousing bolts (metric size/thread/length)? Mine were pretty rusted on the...
  16. T

    97 transmission question

    Thanks Benny, So your basically telling me to go for a 3650 from an 04 GT?
  17. T

    97 transmission question

    Hey Guys, I have a few questions about a possible transmission swap on my 97 Cobra. My current trans is the one that came from the Factory with the car (T-45 with 103K miles on it) that grinds going into 1st and reverse from a dead stop and grinds from 1st to 2nd and 3rd to 4th:mad: . Its also...
View older results
Top Bottom
Back
Forums
Menu