Search results

  1. my9302002

    Thumper heads (E7's) vs 68 302 4V

    Thanks for the offer....Depending on how much running around and cost of machining the heads down to 58cc, drilling steam holes...... I might just sell these heads and go for a set of AFR's. You'll be the first to know. Drew 68 Mustang
  2. my9302002

    Pdestal mount newbie...E7's on 68 302

    Have a 68 Mustang and recently bought some Thumper ported E7's with pedestlal mounts from someone who went a different route. I've researched the archives on adjusting them with shims but why does it seem opposite to me? The instructions read: "Turn the pedestal bolt by hand (no wrench)...
  3. my9302002

    Pedestal mount newbie....E7's on 68 302

    Pedestal mount newbie....E7's Have a 68 Mustang and recently bought some Thumper ported E7's with pedestlal mounts from someone who went a different route. I've researched the archives on adjusting them with shims but why does it seem opposite to me? The instructions read: "Turn the...
  4. my9302002

    Thumper heads (E7's) vs 68 302 4V

    Is Thumper still in business, the website link is not working....Better yet does anyone have a phone number for him? Thanks, Drew
  5. my9302002

    What Seats Will Fit in a '67-'68 Mustang

    Just finished the interior in my 68 Mustang. Used Fiero seats........ Can see a pic of the interior here: Mr. Mikes Leather Upholstery for PT Cruiser, Fiero, Kit-Car, Camaro and Firebird
  6. my9302002

    Thumper heads (E7's) vs 68 302 4V

    No probem, I'll pull the heads in the next month or so. I'm pretty sure it's 9:1 though. I might have some Thumper's for sale soon if that's the case. Thanks
  7. my9302002

    Thumper heads (E7's) vs 68 302 4V

    So I take it the small drop of .5 in compression is not that big a deal. Any ballpark costs for milling the heads and the intake? Thanks for the input....
  8. my9302002

    Thumper heads (E7's) vs 68 302 4V

    Looking for some input for this winter's project. Have a 68 J code 302 with standard .030 rebuild . Engine internals consist of a crane 260 cam (260 duration, .456 lift, 1400-4600rpm), 4v heads which should be 53.5cc This was done back in the 80's and for the life of me I can't remember...
  9. my9302002

    Shelby 10 spoke advice needed

    The Brada repro's are 4 3/8 backspaced. I agree, everyone else I looked at have 4.25
  10. my9302002

    Shelby 10 spoke advice needed

    Thanks Jim.. Ordered the wheels from Branda today. Going with 225/60's all around. Anyone need a great set of Styled Steel 14X6 rims? Andrew
  11. my9302002

    Shelby 10 spoke advice needed

    Here's the chart I'm using that gives the correct backspacing...I hope Jim, do you have the 4.25 backspacing? Mustang Wheel and Tire Size
  12. my9302002

    Shelby 10 spoke advice needed

    Anyone riding around with Vintage 16" rims out there that might give some input?
  13. my9302002

    Shelby 10 spoke advice needed

    Anyone here recommend where to buy them? Did you stay with the 15X7's or did you go with the Vintage 50's.... What size tire? Car has standard springs, shelby drop, front disc brakes. Thanks, Andrew 68 Convertible
  14. my9302002

    14 inch tire recommendation 68 styled steel

    Have power steering....I think the 14" magnum's I have should be 14x7 also, right? I think I might stick with the 235/60's...
  15. my9302002

    14 inch tire recommendation 68 styled steel

    Have searched the archives and am looking for some additional input. Have a 68 convertible and have purchased a set of 68 styled steel wheels which is a 14x7 rim. Thinking about going with 225/60 R14's or 235/60's. Anyone have any rec's? Thanks, Drew 68 Mustang conv.
  16. my9302002

    seat heaters anyone?

    Doing the fiero seats in my 68 convertible and want to add heaters to the seats. Would be perfect for Fall time here in Michigan. Anyone done this? Which kit did you use? Thanks, Andrew
  17. my9302002

    Hood clearance on performer rpm air gap

    Thanks
  18. my9302002

    Hood clearance on performer rpm air gap

    Anyone know if this will fit under the hood of a 68 mustang with a 302? Thanks
  19. my9302002

    engine block ID help needed

    Have a block that is supposed to be out of an 87 LX mustang. I can make out the E7TE on the block behind the starter. (which I know the E stand for 80's and the "7" means it's an 87 block... "T" means truck and "E" means engine category) I also remember reading in the archives about a...
  20. my9302002

    Bottom end, redo or leave it alone...

    How long have these bottom ends been good for? As far as pulling the caps, nothing new needed here? Simply inspect and retorque with a little blue loctite? Motor will be in a casual cruiser daily driver 68 conv Mustang
Top Bottom
Back
Forums
Menu