Search results

  1. 9

    Questions About Damaged Gt40 Heads

    http://item.mobileweb.ebay.com/viewitem?itemId=120939733802&index=3&nav=SEARCH&nid=19677120630 How about these?
  2. 9

    Questions About Damaged Gt40 Heads

    I am about to pick up a set of ported gt40 heads for 150 dollars. Only problem is there is damage in the combustion chamber. So I was wondering if these heads are even worth the coin. And how much it would cost to get them redone. And since I'd be doing it should I upgrade the valves and springs?
  3. 9

    Nice Wheels For A Notchback

    Im looking for a new setup for my coupe. Maybe some deep dish. Please post some pix heres my setup now.
  4. 9

    Turn Signal Constantly Shorting Out And Blowing Fuse

    Also just discoverd that every time i put it in reverse it pops the fuse.
  5. 9

    Turn Signal Constantly Shorting Out And Blowing Fuse

    I had my '90 coupe shipped from CA to NJ and when I picked up my car the turn signals were'nt working. I checked the relay under the passenger side glove box and replaced it. And it was still not working. I checked the fuses and it is constantly blowing one of them. Ive replaced it 2x and each...
  6. 9

    Does anyone have the 92 lx seats wrapped on leather?

    I'm thinking about wrapping my seats in my coupe in leather. They are the seats that don't have the leg extension. Anyone have pics of what there's looks like in leather?
  7. 9

    Bought some Subframe Connectors

    I do this daily, it's called marriage.
  8. 9

    got me a coupe

    if u don't mind me askin, how much u pick her up for? looks good
  9. 9

    Bought some Subframe Connectors

    I was thinking about also por-15 them. I'm from nj stationed in Cali. I'd like to keep my coupe rust free lol
  10. 9

    Bought some Subframe Connectors

    I bought the m/m full length, they come unpainted. Should I just prime them and paint them or should I cough up the coin and get them powder coated?
  11. 9

    trying to do h/c/I without wasting money on a hood

    I've had clearance problems with a trickflow upper and lower
  12. 9

    trying to do h/c/I without wasting money on a hood

    I want to run a systemax
  13. 9

    few questions about my NEW notch.

    It's possible that someone had previously done work to the top end. And didn't properly torque the rockers. There is a lot of vibration going through them and if it wasn't properly adjusted it could have vibrated itself loose. The only way you can tell is by correctly adjusting each one and then...
  14. 9

    trying to do h/c/I without wasting money on a hood

    Has anyone ever had luck with keeping your stock hood? I'd imagine using vert mounts and avoiding the 1 inch spacer might work. But Im also thinking about cutting the hood and covering it with a scoop.
  15. 9

    few questions about my NEW notch.

    Did you check the rest of them? It looks like you found where the noise is coming from. Find out about the torque specs and go over them.
  16. 9

    few questions about my NEW notch.

    Is it coming from the valve covers? You can pull the valve covers off and inspect. Every time I pick up a new car one of the first things I do is pull the plugs and inspect them to make sure the car is running right. I've had a few times where I'd pull the plugs and have signs of worn valve...
  17. 9

    double din head unit install help

    Damn, that's a no go. you can't come back from that.
  18. 9

    Time for a new engine

    My set up is stock. So if I went with a 331 I'll have to go with a nice hci
  19. 9

    double din head unit install help

    Trying to install a stock head unit from my 05 f150 in my 90 coupe. I'm having furnace issues. The head unit is hitting the bar that runs below the hvac controls. Any suggestions? I don't want to move the hvac controls, Id like to have the radio in the origional location if possible.
  20. 9

    Time for a new engine

    Spun a bearing in my coupe, time for something new. Any suggestions? My budget is 2500. not much
Top Bottom
Back
Forums
Menu