Search results

  1. dubbsix

    Help! 95GT With Rough Idle

    Not getting any IAC related codes.. and would that attribute to my hard start condition on top of the rough idle?
  2. dubbsix

    Stuttering 94GT Needs your help!

    awe no one?
  3. dubbsix

    Help! 95GT With Rough Idle

    Please delete... posted in 5.0 tech instead.
  4. dubbsix

    Stuttering 94GT Needs your help!

    My newly purchased 94GT is suffering from a rough idle. the car doesnt seem to run bad when im driving it, but it idles like crap and it also crank a few times before it starts. while running every now and then the engine will "stutter". I recently changed these parts: cap and rotor spark...
  5. dubbsix

    Help! 95GT With Rough Idle

    Help! 94GT With Rough Idle My newly purchased 94GT is suffering from a rough idle. the car doesnt seem to run bad when im driving it, but it idles like crap and it also crank a few times before it starts. while running every now and then the engine will "stutter". I recently changed these...
  6. dubbsix

    Power to manual seat track question

    thanks!
  7. dubbsix

    Power to manual seat track question

    lmao, well thats what im asking you guys :p I know that there didnt appear to be a hole or slot where your arrow is pointed. There were a few small holes near the seat to track mounting bolt hole though. Anyone else give us a bit more clarity on where the spring connects to?
  8. dubbsix

    Power to manual seat track question

    I will have to go home and look at it close up. I cant tell from the picture either.
  9. dubbsix

    Power to manual seat track question

    Thanks. Anyway you could provide pic on which small hole the spring goes into? There were a few holes. One right before the threaded whole for the seat to seat track bolt. thanks in advance!
  10. dubbsix

    Power to manual seat track question

    Did I assemble the manual track correctly? I took my best guess on where the springs should go: Me totally confused: My best guess
  11. dubbsix

    How long is your dipstick? NO really!

    Okay but.. if there are two humps, and the engine dipstick tube only goes to rear sump.. you will never be able to accurately check engine oil levels.. if there is 1 quart of oil in the front sump.. that cant be read from the engine dipstick.
  12. dubbsix

    How long is your dipstick? NO really!

    What?! :jaw: I have to drain both sumps? I did have the car in the car.. but i never thought o drain both. Thanks for providing measurement. I'll measure mine.
  13. dubbsix

    How good is this set up.

    lol you are a good fella! what does everyone think about the procomp heads on ebay? they look pretty clean and cost just about what it would take to port the iron gt40 or e7 heads. Im thinking about doing a GT40 intake setup, with the procom 165cc heads and a F cam... but then again im a...
  14. dubbsix

    How good is this set up.

    Okay well you ripped his setup apart, but didnt offer any worth while information for the fellow. If the setup is junk then what would you put together?
  15. dubbsix

    1996 GT convertible seat track extender question

    Yes. The seat track extenders will work for years 79-04, so you should be okay. You can find them on ebay, or here: 79-04 SEAT TRACK EXTENSIONS MUSTANG
  16. dubbsix

    How long is your dipstick? NO really!

    Oh gotcha well thanks for the reply. I figured I'd just call ford and ask. I can just scribe a line as you suggest, but would rather have it be the correct stick.
  17. dubbsix

    How long is your dipstick? NO really!

    Hey guys, Can anyone provide the part number of their oil dip stick? Still trying to figure out what the previous owner of my 94GT did, but the oil level on the stick thats in there reads about 2" inches above the full line.. even when i know i've put in the correct amount of oil. All i can...
  18. dubbsix

    "Equally" Screwed

    Oh yea its a major pain. I was able to get the dipstick back in, but i cant seem to get the bracket on the dipstick tube to stay on the header bolt. I will probably just zip tie it down somewhere. When money allows i'll be putting the equal length headers up for sale and getting some...
  19. dubbsix

    "Equally" Screwed

    anyone? Any advice on how to replace the tube?
  20. dubbsix

    "Equally" Screwed

    Just bought a 94 GT and the previous owner installed equal length bbk shorties, but did not put the dipstick in correctly. Is there anyway to bend the stock dipstick around the mass of bent tubing of the equal length headers? Have any pictures of your dipstick with the equal length headers?
Top Bottom
Back
Forums
Menu