Search results

  1. M

    No fuel, Need help ASAP

    Thanks, Basically its two pumps that have seperate hoses coming from each, then each hose connects to a 2-1 (T) and that takes those 2 hoses and brings it down to 1 and then you connect that one hose to the top of the fuel hat for the fuel to be sent. Basically this is what happened. One fuel...
  2. M

    No fuel, Need help ASAP

    Ok, well i took the battery out for 2 hours and came back to it, the car no longer blinks theft, but didnt start. I then decided to drop my tank. At this point i didnt know what to expect, but one of the hoses in the tank blew. The hoses are rated to 80psi but somehow one of then broke open...
  3. M

    No fuel, Need help ASAP

    Well im sure its not the dampener because its starting to feel like something else. I'm wondering if its the switch. The first time i tested it, i took my back wire on my mutlimeter and grounded it, i then took the red wire and touched both wires and the Green Wire with yellow stripe read 0...
  4. M

    No fuel, Need help ASAP

    Ok i rechecked the voltage at the inertia switch and i realised i was checking it wrong. I connected my multimeter to both wires and got 11v. I then connected the clip back in the inertia switch and the voltage went to 0. Why did it do that? Is that supposed to happen? Could this be the reason...
  5. M

    No fuel, Need help ASAP

    What are the voltages supposed to be at the inertia pump. I tested the wires with the ignition switch on and the Green Wire with yellow stripe read 0 volts. The pink wire with black stripe read .29v Arn't these both supposed to be 12v? If so what could cause this and what is a possible fix? The...
  6. M

    No fuel, Need help ASAP

    Thanks, ill give that a try today. I probably wont be able to try for a few hours though. The fuel line dampener is that silver piece on the fuel line right. Part number VF1ZE-AA Also i tried to pull it off before and it didn't budge. Is that hose covering a metal line or does the damper just...
  7. M

    No fuel, Need help ASAP

    All fuses, relays, and inertia switch were checked and are all good. I didnt check the power to the inertia switch, ill have to do that though.
  8. M

    No fuel, Need help ASAP

    Actually, i looked for kinks and it was good. Basically this is how it happened. I was giving my friend a ride and filled up my tank from 1/8th a tank to full. I then got on the freeway and my friend asked me to floor it so he can feel 500hp. I then dropped to third gear and took it to 6k rpms...
  9. M

    No fuel, Need help ASAP

    Actually im not sure how much fuel actually came out, and to your theory its actually wrong. If you looked at my mods you would see that i have 2 svt focus pumps installed in the car. They have about 1k miles on them and were both new, so thats would have to be a huge fluke for them both to...
  10. M

    No fuel, Need help ASAP

    Actually, there is no fuel at all in the rails, when i turn the key to the on position or try to crank it, no fuel at all comes out of the fuel line. I pulled the line, like you see in the photo and cranked it and nothing came out. How would the crank sensor stop the fuel from getting to the...
  11. M

    No fuel, Need help ASAP

    Last night my car was running fine, i was cruising at 70mph and just filled up my tank at chevron. After 3 mins of driving the car completely stops as if the spark or gas is not working. I checked my spark and its fine, I pulled the fuel linel to the fuel rail and turned the key to on and no...
  12. M

    Are all fuel level senders the same?

    The reason im asking this has to due with my dual pump hat install. I have the 03 cobra hat and it is missing the fuel level sender and ford wont sell it without the buying the whole hat again. Can i take my existing fuel level sender and modify the bracket to fit the new pump holder, or...
  13. M

    How do you install an 03 cobra fuel hat

    I heard its just drop in, but im missing 2 things. One i'm missing the clip that goes around the fuel pump hose that connects the hoses to the fuel pumps them selves. I have seen people replace these with hoses. What hose would you use 3/8? The reason i ask has to do with the fact i cant get...
  14. M

    Does anyone understand live link logs files and tunes?

    Ahh ok, well im getting the tune revised this friday or next monday. I was just hoping its the tune and not my new rebuilt engine thats all.
  15. M

    Does anyone understand live link logs files and tunes?

    I logged my car today because for the first time i decided to get on it. Its running off my old supercharger tune and it'll be updated next week at the dyno again, but i was trying to figure out why my car gets stuck at 4100rpms. It doesnt pull past that and it struggles really bad. I havnt...
  16. M

    Roush Will the Series IV Supercharger fit a 96?

    3000 Canadian dollars = 2 400.576 U.S. dollars for that isnt to bad, but honestly if you want more than 360hp then i would scratch that. Also going from a return fuel system to a returnless is a step down in my opinion. I would just skip that idea because you will probably also need a hood...
  17. M

    Saleen new inlet/intake for Series II

    ARE You serious! Thats a total waste of money. I cant believe you did that. The Saleen supercharger is junk and i learned that the hard way. I actually sold my unit on ebay for $2200 and bought a vortech v2 for $1800 I not only got a better supercharger capable of more power, but it IAT's are...
  18. M

    Vortech supercharger questions if anyone can answer

    Thanks actually i figured it out. The washer was stuck to the bolt causing it to not come out. Anyone know how to remove the pulley from the supercharger? I cant figure out how to un bolt it?
  19. M

    Vortech supercharger questions if anyone can answer

    Ok now i need some help fast! I am trying to remove my Vortech supercharger and i have all the bolts removed except for the two main bolts, If you look at the photo where it shows number 1 thats where i cant get my bolts out. I can feel the bolts wanting to come out, they spin freely by hand...
  20. M

    Vortech supercharger questions if anyone can answer

    Right now i have a 3.33 pulley on the car so i should probably do 1/2 smaller then.
Top Bottom
Back
Forums
Menu