Search results

  1. rrudholm

    x-pipe?

    I have the catted Pypes X and It sounds like NASCAR to me. It still has the drone but not as deep. I really like it.
  2. rrudholm

    No oil pressure....need help....

    Make sure you run the drill in reverse when priming. I think that is all you will need.
  3. rrudholm

    Roller Rockers

    It was running very well. I did not hear anything unusual until I decided to push it hard through a couple gears and then all of a sudden it started ticking kinda of loud and it seemed as if not all of the cylinders were firing correctly. What do you mean that the pushrods have to be primed...
  4. rrudholm

    Roller Rockers

    OK so I think I may have a problem. I have put about 50 miles on my car now with just having the engine rebiult. I got on it through a couple of gears and then the car started misfiring and ticking. I'm wondering if the rockers need to be adjusted. Is it normal to have to keep adjusting...
  5. rrudholm

    Rear end Gears

    My car has 200K miles so I have to have bearings and all done. They are telling me 6-7 hours labor at $65 per hour. If I'm correct, there is much more to it when replacing bearings. Let's see, I paid $3,000.00 for this convertable and so far I have almost $9,000.00 into re-building it and I'm...
  6. rrudholm

    Rear end Gears

    What should I expect to pay for labor? I will be supplying the gears. The shop will be supplying the install kit with bearings and clutch bushings. How many labors hours should this take?
  7. rrudholm

    Which tuner is king

    I'm in Michigan, The $950.00 also includes the chip but yes I agree this is expensive. I am pretty technical as my career is Biomedical electronics and computers. I feel that I could catch on. It looks like the biggest learning curve is all the terminology. I'm not looking to make a race...
  8. rrudholm

    Which tuner is king

    There is a Tuner shop near my house and they can install a chip and do a full dyno tune. They have a good reputation but is $950.00 for a complete tune better than trying myself with no experince? And does the $400.00 price for the Tweecar include the chip?
  9. rrudholm

    Which tuner is king

    TwEECer RT or SCT Xcalibrator2? What is the most user freindly and will do the best job? opinions please. I have the following mods: E-303 cam, Roush 200 Heads, Trickflow street intake, BBK 70mm TB, 73mm C&L MAF, #24 injectors, 155lph fuel pump, BBK shorties, Pypes X, and Flowmaster cat...
  10. rrudholm

    Reviews on Summit Shorty Headers?

    Summit owns Trickflow so I would bet that is what they are..
  11. rrudholm

    Got It Running

    I finaly got my mustang fired up after complete rebuild with many mods. Whie it runs, I had to set the idle up above 1K to make it idle at all. I can tell this thing wants to scoot but I still have the stock computer. I'm thinking I will just got to a tune shop and have a chip made. I know...
  12. rrudholm

    sun visors for 94 GT convertable

    I have looked every where. The ones I have are crap. you can not do anything with these as they are cardboard. Try and get one apart and you will destroy it in the process. I will probably shell out the big bucks and go to the dealer for some new ones. That is if newer year models will...
  13. rrudholm

    sun visors for 94 GT convertable

    Anyone know where these can be purchased? Mine look like crap and can not find at dealer, internet, junk yards or any where.:shrug:
  14. rrudholm

    Getting ready to fire it up for first time

    Quick question for all you Mustang nuts. I'm finally getting ready start my Mustang for the first time after complete rebuild. My question is, while I know I will need to do something with the computer to make this car run right, will it even start after the following mods with stock computer...
  15. rrudholm

    Fuel Lines

    My fuel lines are no good. Ford does not make these for 94/95 Mustangs. I have fuel line and the connectors that connect to my fuel rail is fine but I can not find these Dorman brand plastic connectors that connect to the steel lines by the fire wall. Help here would be appreciated:bang:
  16. rrudholm

    Oil Pan again

    Repair completed, This pan does work and I ditched the high volume oil pump for a stock one. The guy who built my motor is a stock car racer and they always use high volume oil pumps. I learned that you don't just throw a high volume pump on your car without upgrading your distributer gear...
  17. rrudholm

    Oil Pan again

    OK. found out that the oil pan doesn't clear the high flow oil pump. When I tightened the bolts the oil pump pushes through the pan just barely though in one spot. The new pan I ordered is: Summit Double Sump 5.0L Oil Pans Oil Pan, Steel, Natural, 5 qt., Ford/ Mercury 1983-93, 5.0L I...
  18. rrudholm

    Oil Pan Replacement

    Thanks! I'd rather not hodge podge it..
  19. rrudholm

    Oil Pan Replacement

    My oil pan has a crack. I was thinking about removing it and having it brazed but it's rusty bad. I have another Oil pan that will fit the 302 but it doesn't have the threaded hole for the low oil idiot light sensor. Do I really need this? How would I remove this without having the check...
  20. rrudholm

    Hood Clearance

    This was supposed to be the family convertable but Dad (me) had to hop it up and Mom (my wife) is not happy. She does not want the big ugly hood as she calls it. :nono: • 1994 Mustang GT Convertible • T5 Remanufactured • FMS 3:55 gears • Pro 5.0 shifter • FMS King Cobra clutch • 302ci over...
Top Bottom
Back
Forums
Menu