Search results

  1. tims 86

    Some almost finished pictures of the beast

    very nice, i bet the dash was tuff. looks awsome
  2. tims 86

    brake line size?

    hello im installing a rear willwood disc brake system on my 86. ive purchased a mm rear stainless hose for the frame to axle. and the calipers are 1/8 npt. i want to get flex lines for the calipers to solid frame lines but the sizes i see onsummit are a little confusing. can i run flex all the...
  3. tims 86

    Suspension Questions

    they should be all the same if it was a v-8 car. i believe the only differance is in the 4 bangers.
  4. tims 86

    Can't adjust out enough camber...

    why would a four eye be any differant? isnt it the same thing? my 86 was not hard to do.
  5. tims 86

    Swapping quarter window from 86 onto a 87

    i was going to swap my 86 to 87 93 style but the more i looked at it the more i want to leave it alone...
  6. tims 86

    86 DASH NEEDED

    HELLO IM LOOKIN FOR A DASH AND THE HEATER BOX FOR A 86 LX. MUST BE IN GOOD SHAPE.. THANKS 724 6227643
  7. tims 86

    AMSOIL Experience

    i believe its around 45.00 for five quarts and a wix oil filter, its worth it in my opinion. i think 6k on regular oil is pushing it, though you need to figure in driving conditions.
  8. tims 86

    AMSOIL Experience

    well its not 14 a quart where i live, im sure prices are different in certain areas. i change mine every 6k and the price is about the same as conventional oils if you change every 3k.
  9. tims 86

    Quick 5 lug swap question

    you need to use 94-95 front spindles, 96 and on i believe makes the steering a problem, and i think the rear is a little wider?
  10. tims 86

    87-93 dash swap

    well i tore out my 86 dash to do some work and its in pretty bad shape, how tuff is it to convert to 87-93 type? does wire harness need changed and also the heating stuff? anyone have a 86 dash laying around?
  11. tims 86

    Learned about Fram orange can of death

    stick with motorcraft or ive been using wix for a while they seem good also.
  12. tims 86

    AMSOIL Experience

    I personally run the stuff in everything i own that takes oil, including my chain saw and two stroke equipment. my one buddy sells the stuff and he swears by it. it definetly makes things run smoothly!
  13. tims 86

    Quick 5 lug swap question

    what are you swapping too and from?
  14. tims 86

    front brake question?

    this is just a road race car, weekend driver. thanks for the info, sounds like a new set of cobras should do the trick then.
  15. tims 86

    front brake question?

    hello ive got a 86 lx and im currently working on making a good rolling chassis, so far ive got willwood disc four calipers in the rear, my question is , can i still use a set of two piston cobras in the front? any suggestions? ive got 94 spindles on it.also when i get to it im going to pull the...
  16. tims 86

    Does 86 GT AOD Convertible have an Inertia Switch?

    i have an 86 notch and its tore down to the metal and i havent seen one, only thing im not too sure of is a molex plug to something under drivers seat.
  17. tims 86

    86, rear banjo bolt

    ok then
  18. tims 86

    86, rear banjo bolt

    im doing a 5 lug conversion and need to know what size is the rear banjo bolt that goes to the hard lines up by the pinion snubber. i want to replace the rubber hose w a stainless flex, any kits?
  19. tims 86

    which struts to buy?

    ok thanks, what is the reason behind that? i know my stock 86 struts have different bolt pattern .
  20. tims 86

    which struts to buy?

    hello, i have a 86 notch and im doing a 5 lug conversion, i got the rear end done and im moving to the front, i got some 94 spindles to install, the question is, do i get 94 struts or 87-93?
Top Bottom
Back
Forums
Menu