Search results

  1. S

    Need help with fuel problem

    the car will not start with under then 35 psi fuel pressure. Would bumping my compression to 10.1 have alot to do with my timing. I just dont know what to do. I see poeple with set ups like mine running fine all day, how do they do it?
  2. S

    Need help with fuel problem

    The computer has not been tuned. What could be done to tune it without tuning the computer (fuel pressure, timing, etc.).
  3. S

    Need help with fuel problem

    Need help with new engine running problem I just got my car togeather and I have a problem with somthing but i dont know what. This is what I have 1992 306 Anderson ford N-21 cam Afr 165 heads Tubular gt-40 intake 75mm throttle body, and 75mm mass air 30lb fuel injectors with matching...
  4. S

    need help fast: Roller rockers making noise

    I just got my engine running and only have 10 miles on it? The 1.72 svo pedestal roller rockers are a little loud. I cant hear them unless I get my ear near the valve cover, then its pretty loud. Has any body else had this problem. Is this normal for roller rockers or 5.0? I know that thier...
  5. S

    How do you fix this?

    Ok, I know that every 5.0 is having this problem. I just got my intake and heads ported and polished and I do not want the pcv valve sucking a ton of oil in my ports. So my question is how do you delete or fix the pcv valve so it dont get oil in your in take. I thought of plugging the port on...
  6. S

    need to rebalance

    I just rebuilt my engine and switched from stock 92 forged pistons to .30 over speedpro forged pistons and the weight was a pretty big diffrence. I would say it depends on what your wanting to do with this motor, if you going to be spinning high rpms with it I would say get it balanced. I say do...
  7. S

    Confused?? Head gasket problem

    OK I just bought my Afr 165 heads and need to get a head gasket. I am confused becouse I have a 4.030 bore. Most all the gaskets, the bore sizes are 4.100. Now will this hurt my engine or make the gasket weaker by running the head gasket bore bigger then my engine bore?
  8. S

    Help: How much Lift can you run?????

    ok then this is what I running, Forged 306 tubuar gt-40 intake 75mm throttle body and 75mm EGR 30lb fuel injectors afr 165s heads what would you recommend for a cam?
  9. S

    Help: How much Lift can you run?????

    Well thanks for all the great info, but i would still like to know what cams poeple are running with these heads for power and clearence wise. So what cams are being run with Afr 165s? And are the afr 165s better for torqe or horsepower. I will be ordering the heads monday soi need so...
  10. S

    Help: How much Lift can you run?????

    Well then can anyone tell me what types of cams and they are running with 165 heads, so i can get ta general Idea what lift I can look at. I have talked with alot of companys that will custom grind me a cam but thier lift sounds way to high so I would like some suggestions on what otther are...
  11. S

    Help: How much Lift can you run?????

    I need to know how much clearence I have for a cam. I have a 302 thats bored .30 and the piston comes up out of the bore .004 I am using afr 165s with 1.7 rr. The cam I am looking at the lift is .544 with 1.7 rr. Will this cam clear or is thier a mathmatic way to figure this out without...
  12. S

    just getting into mustangs

    347stroker57 you can find the tranny at tons of places, I know lf you look in a mustang mag you will see lots of ads for it. I recommend brothers performance, becouse thier real fast and the price is good to, but look around, if you goto google.com and type in tko500 you can find prices every...
  13. S

    just getting into mustangs

    i agree the 42lb injectors are way to much. Also with that displacment a nice set of Afr 185s would be sweet. If your going to be building alot power like you want to, your going to need a new tranny trust me the t-5 will not hold up, I recommend the tko500 its a great tranny and holds lots of...
  14. S

    What cam to run????

    Ya I kinda figured that was the way to go but I was wanting to see what other people are running to get an idea on lift and duration with AFR 165s. I am really worried about the lift becouse I dont know how much I can go with speed pro pistons and those heads. People have been telling me that...
  15. S

    What cam to run????

    Need suggestions fast:What cam to run???? OK Iam doing my second engine build and want to do it right, but cant seem to decide on the cam. This is what I am running as of now All forged 306 Afr 165s with spring and valve upgrades tublar gt-40 intake with ported and polished lower 1.7...
  16. S

    Suggestions on what cam

    I have a 92 mustang with these mods All forged 306 AFR 165 heads Ported and ploished gt-40 intake 9.6 compression 30lbs fuel injectors 75mm throttle body and egr 75 mm pro bullet mass air AFM powerpipe 7AL-2 Msd Tremec tko 500 373 gears Also does this sound like a good combo...
View older results
Top Bottom
Back
Forums
Menu